X20AI4622 B&R Electronic Components

Product Details

• Electrical isolation
  Channel isolated from bus; Channel not isolated from channel
• Certifications HazLoc
  cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
• Digital converter resolution Voltage
  ±12-bit
• Load Voltage
  -
• Max. offset drift Voltage
  0.002%/°C
• Common-mode rejection 50 Hz
  70 dB
• Relative humidity Operation
  5 to 95%, non-condensing
• Degree of protection per EN 60529
  IP20
• Certifications UL
  cULus E115267; Industrial control equipment
• Output format Voltage
  INT 0x8001 - 0x7FFF / 1 LSB = 0x0008 = 2.441 mV
• Max. offset drift Current
  0 to 20 mA = 0.004 %/°C ; 4 to 20 mA = 0.005 %/°C
• Max. error Voltage Gain
  0.08%
• B&R ID code
  0x1BAA
• Certifications ATEX
  Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
• I/O module
  4 analog inputs ±10 V or 0 to 20 mA / 4 to 20 mA
• Status indicators
  I/O function per channel, operating state, module status
• Installation elevation above sea level >2000 m
  Reduction of ambient temperature by 0.5°C per 100 m
• Relative humidity Transport
  5 to 95%, non-condensing
• Note
  Order 1x terminal block X20TB12 separately.; Order 1x bus module X20BM11 separately.
• Certifications UKCA
  Yes
Input
±10 V or 0 to 20 mA / 4 to 20 mA, via different terminal connections
Input impedance in signal range Current
-
Temperature Storage
-40 to 85°C
Temperature Operation Horizontal mounting orientation
-25 to 60°C
Pitch
12.5+0.2 mm
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Digital converter resolution Current
12-bit
Permissible input signal Current
Max. ±50 mA
Temperature Derating
-
Max. error Current Gain
0 to 20 mA = 0.08% / 4 to 20 mA = 0.1%
Input filter
Third-order low-pass filter / Cutoff frequency 1 kHz
Conversion procedure
SAR
Diagnostics Module run/error
Yes, using LED status indicator and software
Diagnostics Channel type
Yes, using software
Certifications CE
Yes
Certifications KR
Yes
Certifications EAC
Yes
Conversion time
400 μs for all inputs
Output of digital value during overload
Configurable
Max. gain drift Voltage
0.006%/°C
Permissible input signal Voltage
Max. ±30 V
Common-mode rejection DC
70 dB
Nonlinearity Current
<0.05%
Installation elevation above sea level 0 to 2000 m
No limitation
Max. error Voltage Offset
0.015%
Temperature Operation Vertical mounting orientation
-25 to 50°C
Crosstalk between channels
<-70 dB
Diagnostics Inputs
Yes, using LED status indicator and software
Certifications LR
ENV1
Certifications KC
Yes
Input protection
Protection against wiring with supply voltage
Input impedance in signal range Voltage
20 MΩ
Nonlinearity Voltage
<0.025%
Temperature Transport
-40 to 85°C
Common-mode range
±12 V
Power consumption Bus
0.01 W
Output format
INT
Output format Current
INT 0x0000 - 0x7FFF / 1 LSB = 0x0008 = 4.883 µA
Mounting orientation Horizontal
Yes
Relative humidity Storage
5 to 95%, non-condensing
Insulation voltage between channel and bus
500 Veff
Power consumption Internal I/O
1.1 W
Certifications ABS
Yes
Input type
Differential input
Load Current
<400 Ω
Max. gain drift Current
0 to 20 mA = 0.009 %/°C ; 4 to 20 mA = 0.0113 %/°C
Mounting orientation Vertical
Yes
Max. error Current Offset
0 to 20 mA = 0.03% / 4 to 20 mA = 0.16%

X20AI4622 Related Documents