X20AO4622 B&R Electronic Components

Product Details

• Output protection
  Short-circuit proof
• Output filter
  First-order low-pass filter / cutoff frequency 10 kHz
• Nonlinearity
  <0.007%
• Certifications HazLoc
  cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
• Load per channel Current
  Load max. 600 Ω (Rev. ≥ J0), 500 Ω (Rev. < J0)
• Mounting orientation Horizontal
  Yes
• Max. error Voltage Gain
  0.08%
• Max. output current
  10 mA at voltage >5 V; 15 mA at voltage <5 V
• Certifications UL
  cULus E115267; Industrial control equipment
• Certifications KC
  Yes
• Max. offset drift Voltage
  0.032%/°C
• Temperature Storage
  -40 to 85°C
• Temperature Operation Horizontal mounting orientation
  -25 to 60°C (Rev. ≥ J0), 0 to 55°C (Rev. < J0)
• Status indicators
  I/O function per channel, operating state, module status
• Degree of protection per EN 60529
  IP20
• Note
  Order 1x terminal block X20TB12 separately.; Order 1x bus module X20BM11 separately.
• Power consumption Internal I/O
  1.8 W (Rev. ≥ J0), 2.2 W (Rev. < J0)
• Digital converter resolution Current
  12-bit
• Error caused by load change Current
  Max. 0.5%, from 1 Ω → 600 Ω, resistive
• Relative humidity Transport
  5 to 95%, non-condensing
Switch on/off behavior
Internal enable relay for startup
Power consumption Bus
0.01 W
Certifications ABS
Yes
Error caused by load change Voltage
Max. 0.11%, from 10 MΩ → 1 kΩ, resistive
Relative humidity Operation
5 to 95%, non-condensing
I/O module
4 analog outputs ±10 V or 0 to 20 mA / 4 to 20 mA
Pitch
12.5+0.2 mm
Certifications UKCA
Yes
Certifications LR
ENV1
Max. gain drift Current
0.02 %/°C
Installation elevation above sea level >2000 m
Reduction of ambient temperature by 0.5°C per 100 m
Max. error Voltage Offset
0.05%
Conversion time
300 µs for all outputs
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Digital converter resolution Voltage
±12-bit
Max. offset drift Current
0.032%/°C
Relative humidity Storage
5 to 95%, non-condensing
Short-circuit proof
Current limiting ±40 mA
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Output format Voltage
INT 0x8001 - 0x7FFF / 1 LSB = 0x0008 = 2.441 mV
Temperature Derating
See section "Derating".
Max. error Current Offset
0.05%
Output
±10 V or 0 to 20 mA / 4 to 20 mA, via different terminals
Diagnostics Channel type
Yes, using software
Certifications EAC
Yes
Max. gain drift Voltage
0.015%/°C
Temperature Transport
-40 to 85°C
Temperature Operation Vertical mounting orientation
-25 to 50°C (Rev. ≥ J0), 0 to 50°C (Rev. < J0)
Settling time on output change over entire range
500 µs
Insulation voltage between channel and bus
500 Veff
Certifications CE
Yes
Load per channel Voltage
Max. ±10 mA, load ≥1 kΩ
Installation elevation above sea level 0 to 2000 m
No limitation
B&R ID code
0x1BA3
Electrical isolation
Channel isolated from bus; Channel not isolated from channel
Diagnostics Module run/error
Yes, using LED status indicator and software
Certifications KR
Yes
Output format Current
INT 0x0000 - 0x7FFF / 1 LSB = 0x0008 = 4.883 µA
Mounting orientation Vertical
Yes
Max. error Current Gain
0.09%

X20AO4622 Related Documents