X20AO4632 B&R Electronic Components

Product Details

• Output
  ±10 V or 0 to 20 mA, via different terminal connections
• Power consumption Internal I/O
  1.8 W (Rev. ≥ J0), 2.2 W (Rev. < J0)
• Certifications EAC
  Yes
• Output format Voltage
  INT 0x8001 - 0x7FFF / 1 LSB = 0x0001 = 305.176 µV
• Max. offset drift Current
  0.012%/°C
• Temperature Storage
  -40 to 85°C
• Max. error Current Gain
  0.09%
• Degree of protection per EN 60529
  IP20
• Diagnostics Module run/error
  Yes, using LED status indicator and software
• Certifications ABS
  Yes
• Load per channel Current
  Load max. 600 Ω (Rev. ≥ J0), 500 Ω (Rev. < J0)
• Output protection
  Short-circuit proof
• Relative humidity Operation
  5 to 95%, non-condensing
• Output filter
  First-order low-pass filter / cutoff frequency 10 kHz
• Certifications LR
  ENV1
• Max. gain drift Current
  0.02 %/°C
• Mounting orientation Horizontal
  Yes
• Temperature Operation Vertical mounting orientation
  -25 to 50°C (Rev. ≥ J0), 0 to 50°C (Rev. < J0)
• Electrical isolation
  Channel isolated from bus; Channel not isolated from channel
• Certifications CE
  Yes
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Max. gain drift Voltage
0.01%/°C
Installation elevation above sea level >2000 m
Reduction of ambient temperature by 0.5°C per 100 m
Relative humidity Storage
5 to 95%, non-condensing
I/O module
4 analog outputs ±10 V or 0 to 20 mA
Power consumption Bus
0.01 W
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Output format Current
INT 0x0000 - 0x7FFF / 1 LSB = 0x0001 = 610.352 nA
Error caused by load change Voltage
Max. 0.11%, from 10 MΩ → 1 kΩ, resistive
Temperature Transport
-40 to 85°C
Temperature Operation Horizontal mounting orientation
-25 to 60°C (Rev. ≥ J0), 0 to 55°C (Rev. < J0)
Pitch
12.5+0.2 mm
Certifications UL
cULus E115267; Industrial control equipment
Load per channel Voltage
Max. ±10 mA, load ≥1 kΩ
Error caused by load change Current
Max. 0.5%, from 1 Ω → 600 Ω, resistive
Temperature Derating
See section "Derating".
Max. error Voltage Offset
0.022%
Insulation voltage between channel and bus
500 Veff
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Digital converter resolution Current
15-bit
Installation elevation above sea level 0 to 2000 m
No limitation
Max. error Voltage Gain
0.04%
Diagnostics Channel type
Yes, using software
Certifications UKCA
Yes
Digital converter resolution Voltage
±15-bit
Conversion time
50 µs for all outputs
Switch on/off behavior
Internal enable relay for startup
Relative humidity Transport
5 to 95%, non-condensing
B&R ID code
0x1BA5
Note
Order 1x terminal block X20TB12 separately.; Order 1x bus module X20BM11 separately.
Certifications KC
Yes
Settling time on output change over entire range
500 µs
Mounting orientation Vertical
Yes
Max. error Current Offset
0.045%
Status indicators
I/O function per channel, operating state, module status
Nonlinearity
<0.007%
Certifications KR
Yes
Max. offset drift Voltage
0.012%/°C
Short-circuit proof
Current limiting ±40 mA

X20AO4632 Related Documents