Powermatic Associates Logo

S30SN6R W/30 Banner Electronic Components

S30SN6R W/30 on Powermatic Associates
Banner

Part#:S30SN6R W/30

Manufacturer:Banner

Category:Electronic Components

Product Lifecycle:Active

Product description

Banner Engineering S30SN6R W/30 is a photo-electric sensor from the S30 series designed with a through-beam system, specifically functioning as the receiver part of the setup. It features a thermoplastic housing and is pre-wired with a 30ft / 9m cable that terminates with bare end flying leads for connection. This sensor operates within a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc, and can function in ambient air temperatures ranging from -40 to +70°C. It offers a degree of protection rated at IP67 NEMA 6P, making it suitable for challenging environments. The sensor has a cylindrical M30 threaded/barrel shape and includes 1 digital output (NPN transistor; complementary NO/NC) for signaling. It boasts a sensing distance of up to 60m and utilizes infrared light with a wavelength of 880 nm for detection. The response time is quick at 3ms / 0.003 s, and it supports both Light-ON and Dark-ON operating modes.

Product Details

  • Outputs
    NPN
  • Special Feature: Remote Teach
    No
  • Max Op. Relative Humidity [%]
    90% @ 50°C
  • Feature: Audible
    No
  • Power Supply/Supply Voltage
    10-30 V dc
  • Min Op. Temp. (°C)
    -40
  • Feature: Timing (Hold/Delay)
    No
  • Feature: Health/ Marginal Signal Output
    Yes
  • Sensing Mode (General)
    Opposed
  • Sensing Beam
    Infrared LED
  • Special Feature: Water Detection
    No
  • Barrel Diameter (mm)
    30
  • DeviceNet
    No
  • Housing Style
    Barrel
  • Max Op. Temp. (°C)
    70
  • IP Rating
    IP67
  • Feature: Hazardous Area
    No
  • Input/Output
    Discrete
  • Special Feature: Intrinsically Safe
    No
  • Indicator
    LEDs
  • Primary Housing Material
    Thermoplastic
  • Connection
    Cable
  • NEMA Rating
    NEMA 6P
  • Number of Pins
    4
  • Sensing Mode (Detailed)
    Receiver
  • Operation
    Light/Dark Operate
  • Lens Material
    Acrylic
  • Max Sensing Distance (mm)
    60000
  • Power
    DC
  • Output response time (ms)
    3 ON/1.5 OFF
  • Cable Length (m)
    9
  • Quick Disconnect Type
    No QD
  • Repeatability (µs)
    375
  • Feature: Ecolab Certified
    Yes
  • IO Link
    No
  • Delay at Power-up (ms)
    100
  • Adjustments
    N/A
  • Feature: Encapsulated
    Yes
  • Feature: Chemical Resistant
    No
  • Opposed Mode Emitter/Receiver
    Receiver

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Banner Electronic Components

WLAW360X180DQ on Powermatic Associates

WLAW360X180DQ

Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for 1-color Cool White (W) LED illumination. It operates on a supply voltage range of 12Vdc to 30Vdc, with a nominal voltage of 24Vdc. The dimensions of this task light are L180mm x W360mm, featuring an acrylic diffused window and PBT housing. It comes pre-equipped with a 4-pin M12 Euro-style QD connector for connectivity. The rectangular-shaped light offers a degree of protection rated at IP67 and IP69K, suitable for surface or wall mounting. It can operate in ambient air temperatures ranging from -20°C to +50°C and includes 1 x digital input (12Vdc / 24Vdc) for color control.

4 in stock

Manufacturer warranty

S30SN6R W/30 Banner

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare S30SN6R W/30 with other Electronic Components products

Outputs

Special Feature: Remote T...

Max Op. Relative Humidity...

Feature: Audible

Power Supply/Supply Volta...

Min Op. Temp. (°C)

Feature: Timing (Hold/Del...

Feature: Health/ Marginal...

Sensing Mode (General)

Sensing Beam

Selected product

S30SN6R W/30
Backordered
S30SN6R W/30
Banner

Banner Engineering S30SN6R W/30 is a photo-electric sensor from the S30 series designed with a throu...

OutputsNPN

Special Feature: Remote TeachNo

Max Op. Relative Humidity [%]90% @ 50°C

Feature: AudibleNo

Power Supply/Supply Voltage10-30 V dc

Min Op. Temp. (°C)-40

Feature: Timing (Hold/Delay)No

Feature: Health/ Marginal Signal OutputYes

Sensing Mode (General)Opposed

Sensing BeamInfrared LED

WLAW360X180DQ
4 in stock
WLAW360X180DQ
Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for...

Outputs-

Special Feature: Remote Teach-

Max Op. Relative Humidity [%]-

Feature: Audible-

Power Supply/Supply Voltage-

Min Op. Temp. (°C)-

Feature: Timing (Hold/Delay)-

Feature: Health/ Marginal Signal Output-

Sensing Mode (General)-

Sensing Beam-

MDC-5MR-2-18-SS
7 in stock
MDC-5MR-2-18-SS
Mencom

MDC, Receptacle, 5 Pole, Male Straight, 1Ft, 18awg, 4A, .5-NPT, Front Mount, Stainless Steel

Outputs-

Special Feature: Remote Teach-

Max Op. Relative Humidity [%]-

Feature: Audible-

Power Supply/Supply Voltage-

Min Op. Temp. (°C)-

Feature: Timing (Hold/Delay)-

Feature: Health/ Marginal Signal Output-

Sensing Mode (General)-

Sensing Beam-

About the manufacturer

Banner

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

50.12.9.024.5000 on Powermatic Associates

50.12.9.024.5000

Finder

Finder 50.12.9.024.5000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.65A at 110Vdc and 0.2A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +70 degrees Celsius for operation and has a degree of protection for single-phase applications. This relay supports a rated insulation voltage (Ui) of 250Vac and a mounting mode of 6 kV. It utilizes AgNi+Au (Gold plated silver-nickel) technology, indicating the contact material used. The component is designed for PCB mounting, has 2 poles, and does not specify a communication protocol. Its dimensions are tailored for PCB integration, and it boasts a mechanical resistance of 100,000 operations and a power dissipation/losses capacity of 10,000,000 operations.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

Banner Engineering S30SN6R W/30 is a photo-electric sensor from the S30 series designed with a through-beam system, specifically functioning as the receiver part of the setup. It features a thermoplastic housing and is pre-wired with a 30ft / 9m cable that terminates with bare end flying leads for connection. This sensor operates within a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc, and can function in ambient air temperatures ranging from -40 to +70°C. It offers a degree of protection rated at IP67 NEMA 6P, making it suitable for challenging environments. The sensor has a cylindrical M30 threaded/barrel shape and includes 1 digital output (NPN transistor; complementary NO/NC) for signaling. It boasts a sensing distance of up to 60m and utilizes infrared light with a wavelength of 880 nm for detection. The response time is quick at 3ms / 0.003 s, and it supports both Light-ON and Dark-ON operating modes.

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

AFP0RC32T on Powermatic Associates

AFP0RC32T

Panasonic

Panasonic AFP0RC32T is a CPU unit within the C32 sub-range, featuring an integrated Programmable Logic Controller (PLC) with transistor outputs. It offers memory backup and self-diagnostic functions. The unit connects via a MIL connector and mini USB, and is designed for DIN rail mounting. It supports the RS-232 communication protocol and can handle up to 128 x I/O points and 3 x expansion units. The memory capacity is 32K steps for programs and 32765 words / 32K words for data, supporting up to 4096 x I/O points. It includes 16 x digital inputs (24Vdc; Sink/Source; with 6 x high-speed 50kHz counters) and 16 x digital outputs (24Vdc; NPN; 200mA transistor; with 4 x 50kHz Pulse outputs/axes + 4 x 4.8kHz; 1000 resolution PWM channels). There are also 6 x analog inputs (RTD Pt100 / RTD Pt1000 / RTD Ni1000 / Resistance; with 0.1K/°F / 0.01K/°F resolution). Programming is supported in Ladder diagram (LD), Structured text (ST), Function block diagram (FBD), Sequential function chart (SFC), and Instruction list (IL). It features an 8-character password setting for program upload protection. Processing times are 80ns/step for basic instructions up to 3000 steps, with a minimum of 2.2µs, and 320ns/step for high-level instructions up to 3000 steps, with a minimum of 580ns/step for basic instructions after 3000 steps. Operating modes include periodical interrupt (0.5ms-1.5s) execution, interrupt program execution, constant scan execution, and program edition during RUN download in RUN mode.

5 in stock