N48D28B3016CU Eaton Industrial Automation Components

Name: N48D28B3016CU
Brand: Eaton

Part#:N48D28B3016CU

Manufacturer:Eaton

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

N48D28B3016CU Eaton - Eaton K-Factor nonlinear ventilated transformer, Copper windings, NEMA 2, 60 Hz, 220°C, 30 kVA , Three-phase, 480 Delta V, 208Y/120 Vac, NEMA ST-20, 2 at +2.5%, 2 at -2.5%, 80°C, 30 kVA, 480 Vac-208Y/120 Vac, DOE 2016

Product Details

Warranty
Eaton Selling Policy 25-000, one (1) year from the date of installation of the Product or eighteen (18) months from the date of shipment of the Product, whichever occurs first.
Modification 1
Electrostatic shield
Catalog Number
N48D28B3016CU
Certifications
UL Listed
Temperature rise
80 °C rise
Enclosure
2
Frequency rating
60 Hz
Product Name
Eaton K-Factor nonlinear ventilated transformer
Sound Level
NEMA ST-20
Coil material
Copper
Product Height
36.88 in
Phase
Three-phase
Type
Energy-efficient Ventilated Transformer
UPC
786680204081
Special features
K-factor 13
Secondary Voltage
120 volts
Compliances
DOE2016 Efficient
Insulation
220 °C
Efficiency
10 CFR Part 431-2016 (DOE 2016)
Product Width
24.88 in

Catalog Notes

10 CFR Part 431 (2016) Efficient

Primary voltage

480 V

Volt ampere rating

30 kVA

Product Weight

476 lb

Tap size

2 at +2.5%, 2 at -2.5%

Mounting

Floor or wall

Product Length/Depth

21.13 in

Kva Rating

30 kVA

Voltage rating

480 Vac-208Y/120 Vac

Length

21.13 inches

Primary Voltage

480 volts

Weight

476 pounds

Number of Phases

Mounting Type

Floor Or Wall

Height

36.88 inches

Voltage

120 volts, 480 volts

Coil Material

Copper

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Eaton Industrial Automation Components

XBUTT4

Eaton

XBUTT4 Eaton - Eaton XB IEC terminal block, Screw Connection Double Level Blocks, IEC-XB Series, Gray, IEC/UL #26-10 AWG wire

25 in stock

XBAFBS55

Eaton

XBAFBS55 Eaton - Plug-in bridge

6 in stock

XBAFBS35

Eaton

XBAFBS35 Eaton - Eaton XB IEC, Plug-in bridge, For cross connections in the bridge shaft, Red, 10, 3, XBUT25, XBUT25PE, XBUT25D12, XBUT25D22, XBUT25D12PE, XBUT25D22PE, XBPT25

56 in stock

XBACUTT4

Eaton

XBACUTT4 Eaton - End Cover

3 in stock

5366NCR

Eaton

5366NCR Eaton - Eaton Arrow Hart corrosion resistant straight blade plug, #16-12 AWG, 20A, Industrial, 125V, Back wire, Yellow, Nickel-plated brass, Corrosion resistant, Nylon, 5-20P, Two-pole, three-wire, grounding, Screw, 0.33-0.66", Nylon, Core pack

2 in stock

M22-LED-G

Eaton

M22-LED-G Eaton - Eaton M22 modular pushbutton, LED Light Unit, Screw, IP66, NEMA 4X, 13, Rk resistance 4.7, Illuminated, Green, 12-30 Vac/dc

1 in stock

Manufacturer warranty

N48D28B3016CU Eaton

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare N48D28B3016CU with other Industrial Automation Components products

Warranty

Modification 1

Catalog Number

Certifications

Temperature rise

Enclosure

Frequency rating

Product Name

Sound Level

Coil material

Selected product

Backordered

N48D28B3016CU

Eaton

N48D28B3016CU Eaton - Eaton K-Factor nonlinear ventilated transformer, Copper windings, NEMA 2, 60 H...

WarrantyEaton Selling Policy 25-000,...

Modification 1Electrostatic shield

Catalog NumberN48D28B3016CU

CertificationsUL Listed

Temperature rise80 °C rise

Enclosure2

Frequency rating60 Hz

Product NameEaton K-Factor nonlinear ven...

Sound LevelNEMA ST-20

Coil materialCopper

12 in stock

M22-DDL-GR-X1-X0

Eaton

M22-DDL-GR-X1-X0 Eaton - Eaton M22 modular pushbutton

WarrantyEaton Selling Policy 25-000,...

Modification 1-

Catalog NumberM22-DDL-GR-X1-X0

CertificationsCSA Certified CCC Marked L...

Temperature rise-

Enclosure-

Frequency rating-

Product NameEaton M22 modular pushbutton

Sound Level-

Coil material-

2 in stock

M22-DL-B

Eaton

M22-DL-B Eaton - Eaton M22 modular pushbutton, 22.5 mm, Flush, Momentary, Illuminated, Bezel: Silver...

WarrantyEaton Selling Policy 25-000,...

Modification 1-

Catalog NumberM22-DL-B

CertificationsCCC Marked CSA Certified L...

Temperature rise-

Enclosure-

Frequency rating-

Product NameEaton M22 modular pushbutton

Sound Level-

Coil material-

About the manufacturer

Powermatic Associates is an authorized Eaton distributor, proudly partnering with a global leader in power management solutions to bring our customers innovative and reliable products. Eaton is renowned for its comprehensive range of products and services designed to enhance electrical, hydraulic, and mechanical power efficiency, reliability, and safety. By incorporating Eaton's cutting-edge techn...

Recently viewed products

LC1D126BL

Schneider Electric

Schneider Electric LC1D126BL is a magnetic contactor from the Deca sub-range designed with a low-consumption coil (<2.4W) and ring-lugs connections. This 3-pole (3P; 3NO) contactor supports a rated current of 25A (AC-1) and 12A (440Vac; AC-3), and is suitable for DIN rail mounting. It features a net width of 45 mm and offers a degree of protection of IP20. The control voltage (DC) ranges from 19.2-30Vdc (24Vdc nom.; 0.8...1.25 x Uc), with a rated operating voltage (Ue) of up to 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV, and it has a rated active power ranging from 3kW (220-230Vac; AC-3) to 7.5kW (660-690Vac; AC-3). The rated power (HP) varies from 0.5HP (115Vac; single-phase) to 10HP (575-600Vac; 3-phase), under UL/CSA standards. This contactor is designed for mechanical durability of 15 million operations at no load and electrical durability of 2 million operations with load, with a power consumption of 2.4 W.

0 in stock

RK 4.5T-10-RS 4.5T/S679/S1587

Turck

RK 4.5T-10-RS 4.5T/S679/S1587 Turck - RK 4.5T-10-RS 4.5T/S679/S1587 Actuator and Sensor Cordset, Extension Cordset

0 in stock

9001KS52FBH37

Schneider Electric

Schneider Electric 9001KS52FBH37 is a selector switch designed for use with a gloved hand or with a long handle, featuring a metal (chromium-plated) bezel. It is rated for IP66, NEMA 1, 2, 3, 3R, 4, 12, and 13, indicating a high level of protection against dust, water, and other environmental conditions. The switch operates at a network frequency of 9001K, with a net height of 2.5 kV and a diameter of 600 V. It offers a 3-position, spring-return to center mechanism and has an electrical durability of 500,000 operations with a silver alloy (Ag / Ni) contact material. The primary voltage is rated at 30 mm, with a type of lens at 1.18 inches and a screw-clamp trip unit type. It supports an earthing system with a rated thermal current (Ith) of 10 A and a control circuit rated current of AC-15 3 A at 240Vac and DC-13 0.55 A at 125Vdc. The selector switch weighs 0.55 A and can operate within a temperature range of -70°C to +70°C.

0 in stock

X20DO6639

B&R

X20 digital output module, 6 relays, normally open contacts, 240 VAC / 2 A, 30 VDC / 2 A

1 in stock

SU-7

Panasonic

Panasonic SU-7 is an amplifier designed for sensor applications, featuring an interference prevention function and an OFF-delay/ON-delay timer adjustable from 0 to 5 seconds. It is constructed with a polycarbonate case cover and an ABS housing that is heat resistant. This part is pre-wired with a 2-meter 6-core cable for connectivity and operates within an ambient air temperature range of -10 to +55°C. It includes 6 circuits within the cable and offers 2 digital outputs, both NPN open-collector type, capable of 24Vdc at 100mA, with one designated for self-diagnosis output. The SU-7 has a current consumption of 35mA or 0.035 A and features a visual position indicator with a red LED for operation and a green LED for stability. It is equipped with output short-circuit protection, has a response time of 600µs or 0.0006 seconds, and can operate in either Light-ON or Dark-ON mode. The time delay function can be set anywhere from 0 to 5 seconds.

0 in stock

LC1D126BL

Schneider Electric

0 in stock

9001KS52FBH37

Schneider Electric

0 in stock

SU-7

Panasonic

0 in stock

LC1D126BL

Schneider Electric

0 in stock

Relevant products

N48D34T45CUEE

Verified stock: 0

N48D34T45CUEE Eaton - Eaton K-Factor nonlinear ventilated transformer, KT-13 (3-phase), PV 480V, Taps: 2 at +2.5% /2 at -2.5%, SV 400Y/231V, 150°C rise w/ 200°C insulation systeam, 45 kVA, Copper windings, EE

Eaton

N48D28B4916CUI3

Verified stock: 0

N48D28B4916CUI3 Eaton - Eaton K-Factor nonlinear ventilated transformer, Copper windings, NEMA 2, FR944W, 60 Hz, 220C, 150 kVA, Three-Phase, 480 to 208Y/120, 80C rise, Shielded, DOE 2016, WS61, 305K, K13, 3-in IR window

Eaton

N48D28T33EE

Verified stock: 0

N48D28T33EE Eaton - Eaton K-Factor nonlinear ventilated transformer, KT-13 (3-phase), PV 480V, Taps: 2 at +2.5% /2 at -2.5%, SV 208Y/120V, 150°C rise w/ 200°C insulation systeam, 300 kVA, EE

Eaton

N48D28B3316CU

Verified stock: 0

N48D28B3316CU Eaton - Eaton K-Factor nonlinear ventilated transformer, KT-13 (3-phase), PV 480V, Taps: 2 at +2.5% /2 at -2.5%, SV 208Y/120V, 80°C rise, 300 kVA, 16, Copper windings

Eaton

N48D28T7516

Verified stock: 0

N48D28T7516 Eaton - Eaton K-Factor nonlinear ventilated transformer, Aluminum windings, NEMA 2, FR943, 60 Hz, 220°C, 75 kVA , Three-phase, 480 Delta V, 208Y/120 Vac, NEMA ST-20, 2 at +2.5%, 2 at -2.5%, 150°C, 75 kVA, 480 Vac-208Y/120 Vac, WS60, 305K, DOE 2016

Eaton