X20DO6639 B&R Electronic Components

Product Details

• Additional power dissipation caused by actuators (resistive) [W]
  +0.36
• Total nominal current
  10 A at 30 VDC / 10 A at 240 VAC
• Certifications ATEX
  Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
• Insulation voltages Channel - Channel
  Tested at 750 VAC
• Temperature Derating
  -
• Protective circuit External AC
  RC combination or VDR
• Nominal voltage
  30 VDC / 240 VAC
• Degree of protection per EN 60529
  IP20
• Certifications LR
  ENV1
• Switching capacity Minimum
  0.05 W DC / 2.4 W AC
• Relative humidity Operation
  5 to 95%, non-condensing
• Max. voltage
  264 VAC
• Diagnostics Module run/error
  Yes, using LED status indicator
• Power consumption Bus
  1 W
• Insulation voltages Channel - Bus
  Tested at 2300 VAC
• Mounting orientation Vertical
  Yes
• Switching capacity Total power of all channels DC
  360 W
• Status indicators
  I/O function per channel, operating state, module status
• Note
  Order 1x terminal block X20TB32 separately,; order 1x bus module X20BM12 separately.
• Certifications UKCA
  Yes
Certifications ABS
Yes
Installation elevation above sea level 0 to 2000 m
No limitation
Relative humidity Transport
5 to 95%, non-condensing
Rated frequency
DC / 45 to 63 Hz
Actuator power supply
External
Certifications UL
cULus E115267; Industrial control equipment
Switching delay 1 → 0
≤10 ms
Installation elevation above sea level >2000 m
Not permitted
Temperature Operation Vertical mounting orientation
-25 to 50°C
Nominal output current
2 A at 30 VDC / 2 A at 240 VAC
Pitch
12.5+0.2 mm
Certifications CE
Yes
Service life Electrical
Min. 120 x 103 ops. (at 2 A / 240 VAC)
Temperature Storage
-40 to 85°C
Temperature Operation Horizontal mounting orientation
-25 to 60°C
I/O module
6 digital outputs 30 VDC / 240 VAC, outputs single-channel isolated
Diagnostics Outputs
Yes, using LED status indicator
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Certifications EAC
Yes
Protective circuit Internal
None
Protective circuit External DC
Inverse diode, RC combination or VDR
Switching voltage
Max. 110 VDC / 264 VAC
Power consumption Internal I/O
-
Switching delay 0 → 1
≤10 ms
Mounting orientation Horizontal
Yes
B&R ID code
0xDF50
Contact resistance
Max. 100 mΩ
Certifications KR
Yes
Switching capacity Maximum
60 W DC / 480 W AC
Relative humidity Storage
5 to 95%, non-condensing
Variant
Relay / Normally open contact ; Channels are single-channel isolated.
Electrical isolation
Channel isolated from bus and I/O power supply
Certifications HazLoc
cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
Service life Mechanical
Min. 2 x 107 ops
Temperature Transport
-40 to 85°C
Switching capacity Total power of all channels AC
3000 W

X20DO6639 Related Documents