Powermatic Associates Logo

551446 Festo Pneumatic Tubing

551446 on Powermatic Associates
Festo

Part#:551446

Alt. Part#:PEN-8X1,25-BL-400

Manufacturer:Festo

Category:Pneumatic Tubing

Product Lifecycle:Active

Product description

plastic tubing PEN-8X1,25-BL-400 standard O.D tubing, for QS plug connectors, CN and CK fittings, polyethylene (not approved for use in the food industry). Outside diameter: 8 mm, Bending radius relevant for flow rate: 35 mm, Inside diameter: 5,7 mm, Min.

Product Details

  • Tubing characteristics
    Suitable for energy chains in applications with high cycle rates
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:-:-] Water as per manufacturer's declaration at www.festo.com
  • Outside diameter
    8 mm
  • Type code
    PEN
  • Ambient temperature
    -30 °C ... 60 °C
  • Shore hardness
    D 52 +/-3
  • Pneumatic tubing test conditions
    Suitability for energy chains: >5 million cycles as per FN 942021
  • Inside diameter
    5.7 mm
  • Bending radius relevant for flow rate
    35 mm
  • Min. bending radius
    22.5 mm
  • Certification
    German Technical Control Board (TÜV)
  • Note on materials
    Free of copper and PTFE RoHS-compliant
  • Temperature-dependent operating pressure
    -0.95 bar ... 10 bar
  • Product weight by length
    0.02327 kg/m
  • Material of pneumatic tubing
    PE
  • Pneumatic connection
    For plug connection outside diameter 8 mm For barbed fitting, inside diameter 6 mm
  • Color
    Blue

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

551446 Related Documents

551446 DataSheet.pdf

Similar products from: Festo Pneumatic Tubing

567965 on Powermatic Associates

567965

Festo

plastic tubing PUN-H-5/16-NT-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 5/16, Bending radius relevant for flow rate: 0,121 Fuß, Min. bending radius: 0,065 Fuß, Tubing characteristics: Suitable for energy chai

3540 in stock
159665 on Powermatic Associates

159665

Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. bending

150 in stock
567951 on Powermatic Associates

567951

Festo

plastic tubing PUN-H-1/2-BL-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 1/2, Bending radius relevant for flow rate: 0,204 Fuß, Min. bending radius: 0,075 Fuß, Tubing characteristics: Suitable for energy chains

1560 in stock
159668 on Powermatic Associates

159668

Festo

plastic tubing PUN-10X1,5-BL Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 10 mm, Bending radius relevant for flow rate: 54 mm, Inside diameter: 7 mm, Min. bendi

1650 in stock
197383 on Powermatic Associates

197383

Festo

plastic tubing PUN-H-4X0,75-BL Approved for use in food processing (hydrolysis resistant) Outside diameter: 4 mm, Bending radius relevant for flow rate: 16 mm, Inside diameter: 2,6 mm, Min. bending radius: 8 mm, Tubing characteristics: Suitable for energy

50 in stock
553938 on Powermatic Associates

553938

Festo

plastic tubing PUN-6X1-SW-500 Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. ben

500 in stock

Manufacturer warranty

551446 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 551446 with other Pneumatic Tubing products

Tubing characteristics

Operating medium

Outside diameter

Type code

Ambient temperature

Shore hardness

Pneumatic tubing test con...

Inside diameter

Bending radius relevant f...

Min. bending radius

Selected product

551446
Backordered
551446
Festo

plastic tubing PEN-8X1,25-BL-400 standard O.D tubing, for QS plug connectors, CN and CK fittings, po...

Tubing characteristicsSuitable for energy chains i...

Operating mediumCompressed air as per ISO 85...

Outside diameter8 mm

Type codePEN

Ambient temperature-30 °C ... 60 °C

Shore hardnessD 52 +/-3

Pneumatic tubing test conditionsSuitability for energy chain...

Inside diameter5.7 mm

Bending radius relevant for flow rate35 mm

Min. bending radius22.5 mm

197383
50 in stock
197383
Festo

plastic tubing PUN-H-4X0,75-BL Approved for use in food processing (hydrolysis resistant) Outside di...

Tubing characteristicsSuitable for energy chains i...

Operating mediumCompressed air as per ISO 85...

Outside diameter4 mm

Type codePUN-H

Ambient temperature-35 °C ... 60 °C

Shore hardness-

Pneumatic tubing test conditionsSuitability for energy chain...

Inside diameter2.6 mm

Bending radius relevant for flow rate16 mm

Min. bending radius8 mm

159665
150 in stock
159665
Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittin...

Tubing characteristicsSuitable for energy chains i...

Operating mediumCompressed air as per ISO 85...

Outside diameter6 mm

Type codePUN

Ambient temperature-35 °C ... 60 °C

Shore hardness-

Pneumatic tubing test conditionsSuitability for energy chain...

Inside diameter4 mm

Bending radius relevant for flow rate26.5 mm

Min. bending radius16 mm

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

Pneumatic tubing, an essential component of pneumatic systems, carries compressed air or gas between parts. Constructed from durable and flexible materials such as polyurethane and polyamide, it comes in various types to meet different needs, including resistance to wear, corrosion, and other environmental elements. This tubing is indispensable in industries such as automation, manufacturing, and ...

Pneumatic Tubing

Recently viewed products

MDI3CRL34A7-EQ on Powermatic Associates

MDI3CRL34A7-EQ

Novanta IMS

Novanta IMS MDI3CRL34A7-EQ is a stepper motor characterized by its integrated driver and 2-phase DC stepper motor functionality. It features an external single-end 512-line optical encoder and a single motor stack, enhanced by the Plus 2 version for expanded features. This part offers a 14-pin locking wire crimp connector and a 10-pin friction-lock wire crimp connector for its connections. It supports RS-422 and RS-485 communication protocols. The supply voltage ranges from 12Vdc to 75Vdc, with specific ratings at 24Vdc, 48Vdc, and 72Vdc. It is designed for mounting with an 85x85mm flange and can operate in ambient air temperatures ranging from 0 to +85°C. The MDI3CRL34A7-EQ has an IP20 degree of protection, a moment of inertia of 1kg.cm^2, a stall torque of 233N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

plastic tubing PEN-8X1,25-BL-400 standard O.D tubing, for QS plug connectors, CN and CK fittings, polyethylene (not approved for use in the food industry). Outside diameter: 8 mm, Bending radius relevant for flow rate: 35 mm, Inside diameter: 5,7 mm, Min.

Similar products from: Pneumatic Tubing

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock