1.01.0210.11020 HMS Networks Industrial Automation Components

Ixxat by HMS Networks 1.01.0210.11020 is a CAN/CAN FD repeater designed to facilitate communication in automation systems. It features two duo LEDs for transmitting and identifying defective segments, and one LED for power indication. The device is equipped with a Microchip MCP2562FD CAN/CAN FD transceiver and supports a CAN bus termination resistor of 120Ω. It offers a connection type that varies based on the presence of an integrated bus termination resistor. The CAN bus interface complies with ISO 11898-2 standards and includes a CAN choke with two screw terminals, available in variants with or without integrated CAN termination. The CAN FD bus interface supports both ISO CAN FD and non-ISO CAN FD, with arbitration rates up to 1000kBit/s and data rates up to 8000kbit/s, although actual rates may vary based on operating conditions. The repeater introduces a typical delay of 300ns, equivalent to a 60m bus length, not accounting for the signal delay time of the fiber optics which is 5ns/m. It utilizes a Broadcom HFBR 1404Z 820nm FO transmitter and a Broadcom HFBR 2402Z 820nm FO receiver, with an F-SMA connector for multi-mode fiber optic lines. The device ensures galvanic isolation of 1kVdc/s or 500Vac/min between CAN 1/CAN 2 and the power supply. It operates on a supply voltage of 9-36Vdc and features an ambient air temperature range for operation and storage of -20...+70°C and -40...+85°C, respectively. The repeater is designed for DIN rail mounting in a plastic housing, measuring H105mm x W22.5mm x D120mm, and supports a humidity range of 10-95% RH non-condensing.