ATS48C66Y Schneider Electric Electronic Components

Product Details

• Function Available
  External bypass (optional)
• Range Of Product
  Altistart 48
• Minimum Switching Current
  10 mA 6 V DC relay outputs
• Operating Position
  Vertical +/- 10 degree
• Product Specific Application
  Heavy duty industry and pumps
• Power Supply Frequency Limits
  47.5...63 Hz
• Max Nodes Number
  31
• Motor Starter Type
  Soft starter
• Discrete Input Voltage
  24 V <= 30 V
• Height
  26.38 in (670 mm)
• Width
  15.75 in (400 mm)
• Product Or Component Type
  Soft starter
• Assembly Style
  With heat sink
• Communication Data Link
  Serial
• Power Supply Frequency
  50...60 Hz - 5...5 %
• Discrete Input Logic
  Positive logic Stop, Run, LI3, LI4 < 5 V <= 2 mA > 11 V, >= 5 mA
• Discrete Input Number
  5
• Connector Type
  1 RJ45
• Product Destination
  Asynchronous motors
• Power Supply Voltage
  208...690 V - 15...10 %
Type Of Start
Start with torque control (current limited to 5 In)
Device Connection
In the motor supply line
Starting Current
0.4...1.3 Icl adjustable
Marking
CE
Device Short Name
ATS48
Discrete Output Number
2
Analogue Output Type
Current output AO 0-20 mA or 4-20 mA 500 Ohm
Transmission Rate
4800, 9600 or 19200 bps
Utilisation Category
AC-53A
Net Weight
113.32 lb(US) (51.4 kg)
Depth
11.81 in (300 mm)
Communication Port Protocol
Modbus
Physical Interface
RS485 multidrop
Output Absolute Accuracy Precision
+/- 5 %
Icl Nominal Current
660 A connection in the motor supply line for severe applications 660 A connection in the motor supply line for standard applications
Discrete Input Type
PTC, 750 Ohm 77 °F (25 °C) Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
Power Dissipation In W
1731 W for standard applications 1958 W for standard applications
Motor Power Range AC-3
110…220 kW 200…240 V 3 phase 250…500 kW 380…440 V 3 phase
Maximum Switching Current
Logic output 0.2 A 30 V DC Relay outputs 1.8 A 230 V AC inductive, cos phi = 0.5 20 ms Relay outputs 1.8 A 30 V DC inductive, cos phi = 0.5 20 ms
Protection Type
Phase failure line Thermal protection motor Thermal protection starter
Discrete Output Type
LO1) logic output 0 V common configurable LO2) logic output 0 V common configurable R1) relay outputs fault relay NO R2) relay outputs end of starting relay NO R3) relay outputs motor powered NO
Motor Power Kw
160 kW 230 V for severe applications 315 kW 400 V for severe applications 355 kW 400 V for standard applications 355 kW 440 V for severe applications 400 kW 440 V for standard applications 400 kW 500 V for severe applications

Maximum Horse Power Rating
200 hp 208 V for standard applications 200 hp 230 V for severe applications 250 hp 230 V for standard applications 400 hp 460 V for severe applications 500 hp 460 V for standard applications 500 hp 575 V for severe applications

ATS48C66Y Related Documents