ATV930U07M3 Schneider Electric Industrial Automation Components

Product Details

• Degree Of Protection
  UL type 1 UL 508C
• Discrete Input Number
  10
• Range Of Product
  Altivar Process ATV900
• Net Weight
  9.48 lb(US) (4.3 kg)
• Acceleration And Deceleration Ramps
  Linear adjustable separately from 0.01...9999 s
• Number Of Addresses
  1…247 Modbus serial
• Depth
  8.11 in (206 mm)
• Type Of Cooling
  Forced convection
• Product Or Component Type
  Variable speed drive
• Output Voltage
  <= power supply voltage
• Data Format
  8 bits, configurable odd, even or no parity Modbus serial
• Analogue Output Number
  2
• Device Application
  Industrial Application
• Prospective Line Isc
  50 kA
• Safety Function
  STO (safe torque off) SIL 3
• Supply Frequency
  50...60 Hz +/- 5 %
• Device Short Name
  ATV930
• EMC Filter
  Without EMC filter
• Phase
  3 phase
• Nominal Switching Frequency
  4 kHz
Physical Interface
2-wire RS 485 Modbus serial
Width
5.67 in (144 mm)
Relay Output Number
3
[Us] Rated Supply Voltage
200...240 V - 15...10 %
Exchange Mode
Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
Height
13.78 in (350 mm)
Speed Drive Output Frequency
0.1…599 Hz
Number Of Preset Speeds
16 preset speeds
Analogue Input Number
3
Isolation
Between power and control terminals
Type Of Polarization
No impedance Modbus serial
Refresh Time
Relay output R1, R2, R3)5 ms +/- 0.5 ms)
Braking To Standstill
By DC injection
Mounting Mode
Wall mount
Method Of Access
Slave Modbus TCP
Transmission Frame
RTU Modbus serial
Discrete Output Number
2
Power Range
0.55…1 kW 200…240 V 3 phase
Minimum Switching Current
Relay output R1, R2, R3 5 mA 24 V DC
Synchronous Motor Control Profile
Permanent magnet motor Synchronous reluctance motor
IP Degree Of Protection
IP21 IEC 61800-5-1 IP21 IEC 60529
Switching Frequency
2...16 kHz adjustable 4...16 kHz with derating factor
Transmission Rate
10/100 Mbit/s Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial
Maximum Horse Power Rating
1 hp normal duty 0.5 hp heavy duty
Product Destination
Synchronous motors Asynchronous motors
Frequency Resolution
Display unit 0.1 Hz Analog input 0.012/50 Hz
Analogue Input Type
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits
Variant
Standard version With braking chopper
Maximum Transient Current
5.5 A 60 s normal duty) 5 A 60 s heavy duty)
Motor Power Kw
0.75 kW normal duty) 0.37 kW heavy duty)
Apparent Power
1.1 kVA 240 V normal duty) 0.6 kVA 240 V heavy duty)
Connector Type
2 RJ45 Ethernet IP/Modbus TCP on the control block 1 RJ45 Modbus serial on the control block
Linearity Error
AI1, AI2, AI3 +/- 0.15 % of maximum value analog input AQ1, AQ2 +/- 0.2 % analog output
Analogue Output Type
Software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits Software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits
Continuous Output Current
4.6 A 4 kHz normal duty 3.3 A 4 kHz heavy duty
Accuracy
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
Discrete Output Type
Logic output DQ+ 0…1 kHz <= 30 V DC 100 mA Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA Logic output DQ- 0…1 kHz <= 30 V DC 100 mA
Relay Output Type
Configurable relay logic R1 fault relay NO/NC 100000 cycles Configurable relay logic R2 sequence relay NO 1000000 cycles Configurable relay logic R3 sequence relay NO 1000000 cycles
Supply
External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection Internal supply for di
Discrete Input Type
DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm DI7, DI8 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V) STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm
Asynchronous Motor Control Profile
Optimized torque mode Constant torque standard Variable torque standard
Input Compatibility
DI1...DI8 discrete input level 1 PLC EN/IEC 61131-2 DI7, DI8 pulse input level 1 PLC IEC 65A-68 STOA, STOB discrete input level 1 PLC EN/IEC 61131-2
Communication Port Protocol
EtherNet/IP Modbus serial Modbus TCP
Electrical Connection
Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal 2.5...6 mm² AWG 14...AWG 10 Motor screw terminal 2.5...6 mm² AWG 14...AWG 10 DC bus screw terminal 2.5...6 mm² AWG 14...AWG 10
Option Module
Slot A communication module Profibus DP V1 Slot A communication module Profinet Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication m
Motor Slip Compensation
Automatic whatever the load Can be suppressed Not available in permanent magnet motor law Adjustable
Sampling Duration
2 ms +/- 0.5 ms DI1...DI8) - discrete input 5 ms +/- 1 ms DI7, DI8) - pulse input 1 ms +/- 1 ms AI1, AI2, AI3) - analog input 5 ms +/- 1 ms AQ1, AQ2) - analog output
Discrete Input Logic
Positive logic (source) DI1...DI8), < 5 V, > 11 V Negative logic (sink) DI1...DI8), > 16 V, < 10 V Positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V Positive logic (source) STOA, STOB), < 5 V, > 11 V
Local Signalling
Local diagnostic 3 LED mono/dual colour) Embedded communication status 5 LED dual colour) Communication module status 2 LED dual colour) Presence of voltage 1 LED red)
Line Current
3 A 200 V normal duty) 2.6 A 240 V normal duty) 1.7 A 200 V heavy duty) 1.5 A 240 V heavy duty)
Maximum Switching Current
Relay output R1 resistive, cos phi = 1 3 A 250 V AC Relay output R1 resistive, cos phi = 1 3 A 30 V DC Relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC Relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC Relay output R2
Variable Speed Drive Application Selection
Mixer Food and beverage processing Conveyor Food and beverage processing Shredder Food and beverage processing Process crane Hoisting Thruster Marine Winch Marine Press Material working (wood, ceramic, stone, pvc, metal)

Protection Type
Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive

ATV930U07M3 Related Documents