Powermatic Associates Logo

BMI1002T01F Schneider Electric Electronic Components

BMI1002T01F on Powermatic Associates
Schneider Electric

Part#:BMI1002T01F

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Schneider Electric BMI1002T01F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and double (2) motor stacks. The servo motor operates on a supply voltage of 115Vac-230Vac, including specific ratings of 120Vac, 200Vac, and 220Vac. It offers a degree of protection rated at IP54 and IP65, with a rated current of 5.7A at 1400rpm for 115Vac and 4.59A at 3000rpm for 230Vac. The mounting mode is facilitated by a 100x100mm flange. Communication is enabled through the HIPERFACE protocol. The net width of the motor is 100 mm. It achieves rotational speeds of 1400rpm at 115Vac and 3000rpm at 230Vac, with rated active power of 0.75kW / 750W at 1400rpm for 115Vac and 1.3kW / 1300W at 3000rpm for 230Vac. The maximum torque is 12.39Nm, with a stall torque of 5.07Nm, and operational torques of 5.4Nm at 1400rpm for 115Vac and 4.4Nm at 3000rpm for 230Vac.

Product Details

  • [Us] Rated Supply Voltage
    115...230 V - 15...10 %
  • Continuous Stall Torque
    53.10 lbf.in (6 N.m) 115...230 V single phase
  • Back Emf Constant
    58.5 V/krpm 68 °F (20 °C)
  • Device Short Name
    BMI
  • Shaft Length
    1.57 in (40 mm)
  • Maximum Mechanical Speed
    6000 rpm
  • Stator Inductance
    4.7 mH 68 °F (20 °C)
  • Supply Voltage Limits
    100…240 V
  • Output Current 3S Peak
    18 A 230 V 3 s
  • Second Shaft
    Without second shaft end
  • Supply Frequency
    50/60 Hz - 5...5 %
  • Continuous Stall Current
    6 A
  • Shaft Diameter
    0.75 in (19 mm)
  • Holding Brake
    With
  • Stator Resistance
    1.08 Ohm 68 °F (20 °C)
  • Centring Collar Diameter
    3.74 in (95 mm)
  • Number Of Motor Stacks
    2
  • Speed Feedback Resolution
    131072 points/turn
  • Network Frequency Limits
    47.5…63 Hz
  • Phase
    Single phase
  • Continuous Output Current
    6 A 8 kHz
  • Shaft End
    Untapped
  • Holding Torque
    48.68 lbf.in (5.5 N.m) holding brake
  • Mounting Holes Diameter
    0.35 in (9 mm)
  • Range Compatibility
    Lexium 32i
  • Rotor Inertia
    6.77 kg.cm²
  • Length
    11.10 in (282 mm)
  • Mounting Support
    International standard flange
  • Product Or Component Type
    Servo motor with power stage
  • EMC Filter
    Integrated
  • Feedback Type
    Absolute single turn SinCos Hiperface
  • Electrical Connection
    Printed circuit board connector
  • Type Of Cooling
    Natural convection
  • Stator Electrical Time Constant
    4.35 ms 68 °F (20 °C)
  • Circle Diameter Of The Mounting Holes
    4.53 in (115 mm)
  • Centring Collar Depth
    0.14 in (3.5 mm)
  • Number Of Mounting Holes
    4
  • Number Of Motor Poles
    10
  • Distance Shaft Shoulder-Flange
    0.14 in (3.5 mm)
  • Motor Flange Size
    3.94 in (100 mm)
  • Maximum Axial Force Fa
    0.2 x Fr
  • Torque Constant
    0.89 N.m/A 68 °F (20 °C)
  • Brake Pull-In Power
    8 W
  • Nominal Output Power
    750 W 115 V single phase 1300 W 230 V single phase
  • Nominal Torque
    47.79 lbf.in (5.4 N.m) 115 V single phase 38.94 lbf.in (4.4 N.m) 230 V single phase
  • Nominal Speed
    1400 rpm 115 V single phase 3000 rpm 230 V single phase
  • Product Compatibility
    Drive control unit LXM32i CANopen Drive control unit LXM32i EtherCAT
  • Maximum Current Irms
    30 A 115 V, single phase 30 A 230 V, single phase
  • Peak Stall Torque
    128.34 lbf.in (14.5 N.m) 115 V single phase 128.34 lbf.in (14.5 N.m) 230 V single phase
  • Maximum Radial Force Fr
    990 N 1000 rpm 790 N 2000 rpm 690 N 3000 rpm 620 N 4000 rpm 580 N 5000 rpm

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

BMI1002T01F Related Documents

Product Datasheet-1631036414713.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

0 in stock
M9U31110 on Powermatic Associates

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

1 in stock
BJF36035 on Powermatic Associates

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BJF sub-range. It features a PowerPact B-Frame 100 TMD 3P-3t design, with a rated current of 35A and a rated voltage of 600Vac 600Y/347Vac. The breaker is designed for a fixed busbar connection with a term. nut kit on both line and load sides, offering a degree of protection of IP40. It has a mechanical durability of 15,000 operations and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) device has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It operates within Utilisation category A and has protection settings for over-current fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated impulse voltage (Uimp) is 8 kV, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 690 V. It provides thermal and magnetic protection functions, with a trip current rating of 35 AT and an electrical durability of 10,000 operations at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mode. The short circuit breaking rating varies by voltage, with 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Y/347Vac, and 50kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

7 in stock
QOB315EPD5237 on Powermatic Associates

QOB315EPD5237

Schneider Electric

Square D by Schneider Electric QOB315EPD5237 is a Miniature Circuit Breaker (MCB) designed with Equipment Protection Device (EPD) functionality, offering ground fault protection. This bolt-on mounted MCB operates with a rated current of 15A and a connection type that also utilizes a bolt-on mechanism. It is designed for use with a rated voltage (AC) of 240 V and can accommodate a wire cross-section of 14-8AWG (1 cable Cu). The QOB315EPD5237 features 3 poles and has a residual current sensitivity of 30mA / 0.03. Its protection functions include ground fault protection, and it has a short circuit breaking rating of 10kA at 240Vac. The type of terminals used in this MCB is ring tongue.

1 in stock

Manufacturer warranty

BMI1002T01F Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare BMI1002T01F with other Electronic Components products

[Us] Rated Supply Voltage

Continuous Stall Torque

Back Emf Constant

Device Short Name

Shaft Length

Maximum Mechanical Speed

Stator Inductance

Supply Voltage Limits

Output Current 3S Peak

Second Shaft

Selected product

BMI1002T01F
Backordered
BMI1002T01F
Schneider Electric

Schneider Electric BMI1002T01F is an AC servo motor within the Servo motors sub-range, featuring an ...

[Us] Rated Supply Voltage115...230 V - 15...10 %

Continuous Stall Torque53.10 lbf.in (6 N.m) 115...2...

Back Emf Constant58.5 V/krpm 68 °F (20 °C)

Device Short NameBMI

Shaft Length1.57 in (40 mm)

Maximum Mechanical Speed6000 rpm

Stator Inductance4.7 mH 68 °F (20 °C)

Supply Voltage Limits100…240 V

Output Current 3S Peak18 A 230 V 3 s

Second ShaftWithout second shaft end

LC1F225L7
1 in stock
LC1F225L7
Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for...

[Us] Rated Supply Voltage-

Continuous Stall Torque-

Back Emf Constant-

Device Short NameLC1F

Shaft Length-

Maximum Mechanical Speed-

Stator Inductance-

Supply Voltage Limits-

Output Current 3S Peak-

Second Shaft-

M9U31110
1 in stock
M9U31110
Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads,...

[Us] Rated Supply Voltage-

Continuous Stall Torque-

Back Emf Constant-

Device Short NameC60H-DC

Shaft Length-

Maximum Mechanical Speed-

Stator Inductance-

Supply Voltage Limits-

Output Current 3S Peak-

Second Shaft-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

BMI1002P02A on Powermatic Associates

BMI1002P02A

Verified stock: 0

Schneider Electric BMI1002P02A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, and double (2) motor stacks. The servo motor operates on a supply voltage range of 208Vac to 480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP54 and IP65, with rated currents of 3.9A at 1900rpm and 208Vac, 3.5A at 3800rpm and 400Vac, and 3.25A at 4700rpm and 480Vac. The mounting mode is a 100x100mm flange. Communication is facilitated via the HIPERFACE protocol. The net width of the motor is 100 mm. Rotational speeds are 1900rpm at 208Vac, 3800rpm at 400Vac, and 4700rpm at 480Vac, with rated active power of 0.98kW at 1900rpm and 208Vac, 1.73kW at 3800rpm and 400Vac, and 1.69kW at 4700rpm and 480Vac. Maximum torque is 13.92Nm, with stall torque at 4.99Nm, and operational torques of 4.91Nm at 1900rpm and 208Vac, 4.34Nm at 3800rpm and 400Vac, and 4Nm at 4700rpm and 480Vac. The moment of inertia is 6.28kg.cm2.

Schneider Electric

BMI1003P01A on Powermatic Associates

BMI1003P01A

Verified stock: 0

Schneider Electric BMI1003P01A is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a smooth shaft, and triple (3) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP54 and IP65, ensuring its suitability for various industrial environments. The rated current varies with speed and voltage, being 4.3A at 1500rpm and 208Vac, 3.85A at 3000rpm and 400Vac, and 3.55A at 3600rpm and 480Vac. This motor is designed for mounting with a 100x100mm flange and communicates via the HIPERFACE protocol. Its net width is 100 mm. The rotational speed capabilities are 1500rpm at 208Vac, 3000rpm at 400Vac, and 3600rpm at 480Vac, with corresponding rated active power of 1.13kW / 1130W, 2.01kW / 2010W, and 2.1kW / 2100W. The maximum torque is 18.87Nm, with a stall torque of 7.31Nm, and operational torques of 7.22Nm at 1500rpm and 208Vac, 6.38Nm at 3000rpm and 400Vac, and 5.57Nm at 3600rpm and 480Vac. The moment of inertia is rated at 9.37kg.cm2.

Schneider Electric

BMI1002P22F on Powermatic Associates

BMI1002P22F

Verified stock: 0

Schneider Electric BMI1002P22F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and double (2) motor stacks. The supply voltage ranges from 208Vac to 480Vac, supporting 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP65 and operates at rated currents of 3.9A at 1900rpm with 208Vac, 3.5A at 3800rpm with 400Vac, and 3.25A at 4700rpm with 480Vac. The motor is mounted via a 100x100mm flange and uses the HIPERFACE communication protocol. Its net width is 100 mm. The rotational speeds are 1900rpm at 208Vac, 3800rpm at 400Vac, and 4700rpm at 480Vac, with rated active powers of 0.98kW at 1900rpm with 208Vac, 1.73kW at 3800rpm with 400Vac, and 1.69kW at 4700rpm with 480Vac. The maximum torque is 13.92Nm, with stall torque at 4.99Nm and operational torques of 4.91Nm at 1900rpm with 208Vac, 4.34Nm at 3800rpm with 400Vac, and 4Nm at 4700rpm with 480Vac. The moment of inertia is 6.77kg.cm.

Schneider Electric

BMI1003P31F on Powermatic Associates

BMI1003P31F

Verified stock: 0

Schneider Electric BMI1003P31F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a keyed shaft, a holding brake, and triple (3) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including specific ratings at 220Vac, 240Vac, and 400Vac. It offers a degree of protection rated at IP65 and supports a rated current of 4.3A at 1500rpm with 208Vac, 3.85A at 3000rpm with 400Vac, and 3.55A at 3600rpm with 480Vac. The mounting mode is a 100x100mm flange. Communication is facilitated through the HIPERFACE protocol. The net width of the motor is 100 mm. It achieves rotational speeds of 1500rpm at 208Vac, 3000rpm at 400Vac, and 3600rpm at 480Vac, with rated active power of 1.13kW / 1130W at 1500rpm and 208Vac, 2.01kW / 2010W at 3000rpm and 400Vac, and 2.1kW / 2100W at 3600rpm and 480Vac. The maximum torque is 18.87Nm, with a stall torque of 7.31Nm, and operational torques of 7.22Nm at 1500rpm and 208Vac, 6.38Nm at 3000rpm and 400Vac, and 5.57Nm at 3600rpm and 480Vac. The moment of inertia is 10.15kg.cm.

Schneider Electric

BMI1002P02F on Powermatic Associates

BMI1002P02F

Verified stock: 0

Schneider Electric BMI1002P02F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute multi-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and double (2) motor stacks. The servo motor operates on a supply voltage of 208Vac-480Vac, including 220Vac, 240Vac, and 400Vac options. It offers a degree of protection rated at IP54 and IP65. The rated current varies with speed and voltage: 3.9A at 1900rpm and 208Vac, 3.5A at 3800rpm and 400Vac, and 3.25A at 4700rpm and 480Vac. This motor is designed for mounting with a 100x100mm flange and communicates via the HIPERFACE protocol. It has a net width of 100 mm. The rotational speed capabilities are 1900rpm at 208Vac, 3800rpm at 400Vac, and 4700rpm at 480Vac, with rated active power of 0.98kW/980W, 1.73kW/1730W, and 1.69kW/1690W, respectively. The maximum torque is 13.92Nm, with a stall torque of 4.99Nm, and operating torques of 4.91Nm at 1900rpm and 208Vac, 4.34Nm at 3800rpm and 400Vac, and 4Nm at 4700rpm and 480Vac. The moment of inertia is 6.77kg.cm.

Schneider Electric

FAQ

Out if stock but available for backorder.

Schneider Electric BMI1002T01F is an AC servo motor within the Servo motors sub-range, featuring an integrated servo drive and motor. It is designed with an absolute single-turn 128ppr SinCos encoder, a smooth shaft, a holding brake, and double (2) motor stacks. The servo motor operates on a supply voltage of 115Vac-230Vac, including specific ratings of 120Vac, 200Vac, and 220Vac. It offers a degree of protection rated at IP54 and IP65, with a rated current of 5.7A at 1400rpm for 115Vac and 4.59A at 3000rpm for 230Vac. The mounting mode is facilitated by a 100x100mm flange. Communication is enabled through the HIPERFACE protocol. The net width of the motor is 100 mm. It achieves rotational speeds of 1400rpm at 115Vac and 3000rpm at 230Vac, with rated active power of 0.75kW / 750W at 1400rpm for 115Vac and 1.3kW / 1300W at 3000rpm for 230Vac. The maximum torque is 12.39Nm, with a stall torque of 5.07Nm, and operational torques of 5.4Nm at 1400rpm for 115Vac and 4.4Nm at 3000rpm for 230Vac.

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock