Powermatic Associates Logo

HDL36015AASA Schneider Electric Electronic Components

HDL36015AASA on Powermatic Associates
Schneider Electric

Part#:HDL36015AASA

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

PowerPact H Circuit Breaker,ThermMagn,15A,3P,600V,14kA,Aux Switch,Shunt Trip

Product Details

  • Magnetic Tripping Current
    750 A
  • Depth
    4.36 in (110.74 mm)
  • Magnetic Hold Current
    350 A
  • Line Rated Current
    15 A
  • Continuous Current Rating
    80 %
  • Product Or Component Type
    Circuit breaker
  • Mounting Mode
    Unit mount
  • Breaking Capacity Code
    D
  • Tightening Torque
    44.25 lbf.in (5 N.m) 0.00…0.15 in² (2.5…95 mm²) (AWG 14...AWG 3/0)
  • Number Of Poles
    3P
  • Height
    6.4 in (162.56 mm)
  • Width
    4.12 in (104.65 mm)
  • Range Of Product
    PowerPact H
  • Electrical Connection
    Lugs load Lugs line

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

HDL36015AASA Related Documents

Product Datasheet-1631033270164.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

0 in stock
M9U31110 on Powermatic Associates

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

1 in stock
BJF36035 on Powermatic Associates

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BJF sub-range. It features a PowerPact B-Frame 100 TMD 3P-3t design, with a rated current of 35A and a rated voltage of 600Vac 600Y/347Vac. The breaker is designed for a fixed busbar connection with a term. nut kit on both line and load sides, offering a degree of protection of IP40. It has a mechanical durability of 15,000 operations and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) device has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It operates within Utilisation category A and has protection settings for over-current fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated impulse voltage (Uimp) is 8 kV, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 690 V. It provides thermal and magnetic protection functions, with a trip current rating of 35 AT and an electrical durability of 10,000 operations at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mode. The short circuit breaking rating varies by voltage, with 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Y/347Vac, and 50kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

7 in stock
QOB315EPD5237 on Powermatic Associates

QOB315EPD5237

Schneider Electric

Square D by Schneider Electric QOB315EPD5237 is a Miniature Circuit Breaker (MCB) designed with Equipment Protection Device (EPD) functionality, offering ground fault protection. This bolt-on mounted MCB operates with a rated current of 15A and a connection type that also utilizes a bolt-on mechanism. It is designed for use with a rated voltage (AC) of 240 V and can accommodate a wire cross-section of 14-8AWG (1 cable Cu). The QOB315EPD5237 features 3 poles and has a residual current sensitivity of 30mA / 0.03. Its protection functions include ground fault protection, and it has a short circuit breaking rating of 10kA at 240Vac. The type of terminals used in this MCB is ring tongue.

1 in stock

Manufacturer warranty

HDL36015AASA Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare HDL36015AASA with other Electronic Components products

Magnetic Tripping Current

Depth

Magnetic Hold Current

Line Rated Current

Continuous Current Rating

Product Or Component Type

Mounting Mode

Breaking Capacity Code

Tightening Torque

Number Of Poles

Selected product

HDL36015AASA
Backordered
HDL36015AASA
Schneider Electric

PowerPact H Circuit Breaker,ThermMagn,15A,3P,600V,14kA,Aux Switch,Shunt Trip

Magnetic Tripping Current750 A

Depth4.36 in (110.74 mm)

Magnetic Hold Current350 A

Line Rated Current15 A

Continuous Current Rating80 %

Product Or Component TypeCircuit breaker

Mounting ModeUnit mount

Breaking Capacity CodeD

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Number Of Poles3P

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Magnetic Tripping Current-

Depth-

Magnetic Hold Current-

Line Rated Current35 A

Continuous Current Rating80 %

Product Or Component TypeCircuit breaker

Mounting ModeClip-on 35 mm symmetrical DI...

Breaking Capacity CodeJ

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Number Of Poles3P

M9U31110
1 in stock
M9U31110
Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads,...

Magnetic Tripping Current-

Depth-

Magnetic Hold Current-

Line Rated Current10 A 77 °F (25 °C) EN/IEC 60...

Continuous Current Rating-

Product Or Component TypeMiniature circuit-breaker

Mounting ModeClip-on

Breaking Capacity Code-

Tightening Torque22.13 lbf.in (2.5 N.m) top o...

Number Of Poles-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

HDL36015C on Powermatic Associates

HDL36015C

Verified stock: 0

Square D by Schneider Electric HDL36015C is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range, featuring a PowerPact H-Frame 150 TMD design. It is a 3-pole (3P) device with a rated current of 15A and offers thermal protection (overload) and magnetic protection (short-circuit). This MCCB has a rated insulation voltage (Ui) of 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 250Vdc. It supports a mounting mode of individual unit mount on plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. The HDL36015C has an IP40 degree of protection, operates via a toggle (manual) mechanism, and has fixed protection settings for over-current at 15A, short-circuit hold current at 350A, and short-circuit trip current at 750A. Its rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 15 AT, with a frame current rating of 150 AF. It has a short circuit breaking rating of 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac for UL489, and 20kA at 250Vdc for UL489. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A. Connection is facilitated by lugs on both load and line sides.

Schneider Electric

HDL36040C on Powermatic Associates

HDL36040C

Verified stock: 0

Square D by Schneider Electric HDL36040C is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range. It features a PowerPact H-Frame 150 TMD design with 3 poles (3P) and a rated current of 40A. This MCCB is designed for 600Vac/250Vdc with a 14kA breaking capacity and includes lugs on both load and line sides for connection. It offers thermal protection for overload and magnetic protection for short-circuit scenarios. The rated insulation voltage (Ui) is 750 V, with a rated voltage (AC) of 600Vac 600Y/347Vac and a rated voltage (DC) of 250Vdc. It is designed for individual unit mount on plate, with a net height of 163 mm, width of 104 mm, and depth of 86 mm. The degree of protection is IP40, and it operates with a toggle (manual) mechanism. Protection settings include over-current fixed at 40A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 850A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 40 AT, with a frame current rating of 150 AF. The short circuit breaking rating varies with voltage, up to 25kA at 240Vac and 20kA at 250Vdc, according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A.

Schneider Electric

HDL36050C on Powermatic Associates

HDL36050C

Verified stock: 0

Square D by Schneider Electric HDL36050C is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDL sub-range, featuring a PowerPact H-Frame 150 TMD design. This 3-pole (3P) circuit breaker is designed for a rated current of 50A and offers both thermal protection (overload) and magnetic protection (short-circuit). It supports a rated insulation voltage (Ui) of 750 V, with an AC rated voltage of 600Vac and 600Y/347Vac, and a DC rated voltage of 250Vdc. The HDL36050C is equipped with lugs on both load and line sides for connection, and it is designed for individual unit mount on a plate. It has a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm. The degree of protection is IP40, and it operates with a toggle (manual) mechanism. Protection settings include over-current fixed at 50A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 850A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 50 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

Schneider Electric

FAQ

Out if stock but available for backorder.

PowerPact H Circuit Breaker,ThermMagn,15A,3P,600V,14kA,Aux Switch,Shunt Trip

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock