Powermatic Associates Logo

HGA260905 Schneider Electric Electronic Components

HGA260905 on Powermatic Associates
Schneider Electric

Part#:HGA260905

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Circuit breaker, PowerPact H, I-Line, thermal magnetic, 90A, 2 pole,18 kA, 600 VAC

Product Details

  • Electrical Connection
    I-Line connection line Lugs load
  • Continuous Current Rating
    80 %
  • Width
    2.94 in (74.68 mm)
  • Phase Connection
    CA
  • Depth
    4.8 in (121.92 mm)
  • Height
    9.73 in (247.14 mm)
  • Tightening Torque
    44.25 lbf.in (5 N.m) 0.00…0.15 in² (2.5…95 mm²) (AWG 14...AWG 3/0)
  • Range Of Product
    PowerPact H
  • Number Of Poles
    2P
  • Product Or Component Type
    Circuit breaker
  • Magnetic Tripping Current
    1450 A
  • Mounting Mode
    I-Line
  • Magnetic Hold Current
    800 A
  • Breaking Capacity Code
    G
  • Line Rated Current
    90 A

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

HGA260905 Related Documents

Product Datasheet-1631030196302.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
LC1F400G7 on Powermatic Associates

LC1F400G7

Schneider Electric

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. It operates with a control voltage (AC) range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 110kW at 220-230Vac, 200kW at 380-400Vac, 220kW at 415Vac, 250kW at 440Vac, 257kW at 500Vac, 280kW at 660-690Vac, and 185kW at 1000Vac, all under AC-3 conditions. The LC1F400G7 boasts a mechanical durability of 10,000,000 operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

1 in stock
LJB65 on Powermatic Associates

LJB65

Schneider Electric

WIREWAY 6 x 6 - N12 - 5 ft lg

2 in stock

Manufacturer warranty

HGA260905 Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare HGA260905 with other Electronic Components products

Electrical Connection

Continuous Current Rating

Width

Phase Connection

Depth

Height

Tightening Torque

Range Of Product

Number Of Poles

Product Or Component Type

Selected product

HGA260905
Backordered
HGA260905
Schneider Electric

Circuit breaker, PowerPact H, I-Line, thermal magnetic, 90A, 2 pole,18 kA, 600 VAC

Electrical ConnectionI-Line connection line Lugs ...

Continuous Current Rating80 %

Width2.94 in (74.68 mm)

Phase ConnectionCA

Depth4.8 in (121.92 mm)

Height9.73 in (247.14 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Range Of ProductPowerPact H

Number Of Poles2P

Product Or Component TypeCircuit breaker

HDF36050
7 in stock
HDF36050
Schneider Electric

Square D by Schneider Electric HDF36050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionBusbar connection line Busba...

Continuous Current Rating-

Width-

Phase Connection-

Depth4.36 in (110.74 mm)

Height6.4 in (162.56 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Range Of ProductPowerPact H

Number Of Poles3P

Product Or Component TypeCircuit breaker

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionTerminal nut ON and OFF end

Continuous Current Rating-

Width-

Phase Connection-

Depth3.15 in (80 mm)

Height5.39 in (137 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Range Of Product-

Number Of Poles3P

Product Or Component TypeCircuit breaker

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

HGA260251 on Powermatic Associates

HGA260251

Verified stock: 0

Square D by Schneider Electric HGA260251 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HGA sub-range, designed as a PowerPact H-Frame 150 TMD 2P 25A 600Vac/500Vdc 18kA I-line AB with an 80% rating. It features a 2-pole (2P) configuration with I-line connection (AB phases) for mounting. This MCCB offers thermal protection for overload scenarios and magnetic protection against short-circuits, with a rated current of 25A. The rated insulation voltage (Ui) is 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 500Vdc. It mounts on I-line with line side isolated plug-on jaws plus a mechanical I-Line bracket mechanism, ensuring a robust attachment. The net dimensions are 163 mm in height, 104 mm in width, and 86 mm in depth, with an IP40 degree of protection. Operation is manual via a toggle, with over-current protection fixed at 25A and short-circuit protection settings fixed at 350A for hold current and 750A for trip current. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 25 AT, with a frame current rating of 150 AF. Short circuit breaking ratings include 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc and 500Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A.

Schneider Electric

HGA260254 on Powermatic Associates

HGA260254

Verified stock: 0

Square D by Schneider Electric HGA260254 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HGA sub-range, designed as a PowerPact H-Frame 150 TMD 2P 25A 600Vac/500Vdc 18kA I-line BC 80% rated. It features a 2-pole (2P) configuration with thermal protection for overload and magnetic protection for short-circuit scenarios. The rated current is 25A, with a rated insulation voltage (Ui) of 750 V and rated voltages of 600Vac 600Y/347Vac for AC and 500Vdc for DC. This MCCB mounts on I-line with line side isolated plug-on jaws plus a mechanical I-Line bracket mechanism, ensuring a robust attachment. It has a net height of 163 mm, a width of 104 mm, and a depth of 86 mm, offering an IP40 degree of protection. The operating mode is manual toggle, with over-current protection settings fixed at 25A and short-circuit protection settings fixed at 350A for hold current and 750A for trip current. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 25 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies across voltages, with 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc and 500Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A.

Schneider Electric

HGA260505 on Powermatic Associates

HGA260505

Verified stock: 0

Square D by Schneider Electric HGA260505 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HGA sub-range, featuring a PowerPact H-Frame 150 TMD 2P 50A 600Vac/500Vdc 18kA I-line CA 80% rated design. It offers a 2-pole (2P) configuration with thermal protection for overload and magnetic protection for short-circuit scenarios. The rated current is 50A, with a rated insulation voltage (Ui) of 750 V and rated voltages of 600Vac 600Y/347Vac for AC and 500Vdc for DC. This breaker mounts on I-line with line side isolated plug-on jaws plus a mechanical I-Line bracket mechanism, ensuring a robust attachment. It has a net height of 163 mm, a width of 104 mm, and a depth of 86 mm, with an IP40 degree of protection. Operation is manual via a toggle, with over-current protection settings fixed at 50A and short-circuit protection settings fixed at 400A hold current and 850A trip current. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 50 AT, with a frame current rating of 150 AF. Short circuit breaking ratings include 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc and 500Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

Schneider Electric

HGA261505 on Powermatic Associates

HGA261505

Verified stock: 0

Square D by Schneider Electric HGA261505 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HGA sub-range, featuring a PowerPact H-Frame 150 TMD 2P 150A design for 600Vac/500Vdc with an 18kA I-line CA 80% rating. It offers a 2-pole (2P) configuration with thermal and magnetic protection functions for overload and short-circuit scenarios, respectively. The rated current is 150A, with a rated insulation voltage (Ui) of 750 V and rated voltages of 600Vac 600Y/347Vac and 500Vdc. This breaker mounts on I-line with line side isolated plug-on jaws plus a mechanical I-Line bracket mechanism, ensuring a robust attachment. It has a net height of 163 mm, a width of 104 mm, and a depth of 86 mm, with an IP40 degree of protection. The operating mode is manual toggle, with over-current protection settings fixed at 150A and short-circuit protection settings fixed at 900A hold current and 1700A trip current. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 150 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies by voltage, including 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc and 500Vdc, all under UL489. The trip unit type is thermal-magnetic (fixed) without a display, and it falls under utilisation category A.

Schneider Electric

FAQ

Out if stock but available for backorder.

Circuit breaker, PowerPact H, I-Line, thermal magnetic, 90A, 2 pole,18 kA, 600 VAC

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock