Powermatic Associates Logo

JGL36200SALU Schneider Electric Electronic Components

JGL36200SALU on Powermatic Associates
Schneider Electric

Part#:JGL36200SALU

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Circuit breaker, PowerPacT J, unit mount, thermal-magnetic, 200A, 3 pole 18 kA, 600 VAC, shunt trip, control wire ON end

Product Details

  • Breaking Capacity Code
    G
  • Magnetic Hold Current
    1000 A
  • Tightening Torque
    230.12 lbf.in (26 N.m) 0.15…0.29 in² (95…185 mm²) (AWG 3/0...350 kcmil)
  • Magnetic Tripping Current
    2000 A
  • Height
    7.52 in (191.01 mm)
  • Continuous Current Rating
    80 %
  • Width
    4.12 in (104.65 mm)
  • Number Of Poles
    3P
  • Depth
    5 in (127.00 mm)
  • Product Or Component Type
    Circuit breaker
  • Electrical Connection
    Lugs load Lugs line

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

JGL36200SALU Related Documents

Product Datasheet-1631040639795.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

6 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

0 in stock
M9U31110 on Powermatic Associates

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

1 in stock
BJF36035 on Powermatic Associates

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BJF sub-range. It features a PowerPact B-Frame 100 TMD 3P-3t design, with a rated current of 35A and a rated voltage of 600Vac 600Y/347Vac. The breaker is designed for a fixed busbar connection with a term. nut kit on both line and load sides, offering a degree of protection of IP40. It has a mechanical durability of 15,000 operations and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) device has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It operates within Utilisation category A and has protection settings for over-current fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated impulse voltage (Uimp) is 8 kV, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 690 V. It provides thermal and magnetic protection functions, with a trip current rating of 35 AT and an electrical durability of 10,000 operations at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mode. The short circuit breaking rating varies by voltage, with 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Y/347Vac, and 50kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

7 in stock
LC1F400P7 on Powermatic Associates

LC1F400P7

Schneider Electric

Schneider Electric LC1F400P7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features ring-lugs/bar connections and is equipped with 3 poles (3P; 3NO). The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. The control voltage (AC) specifications are 196-253Vac (230Vac nominal; 40-400Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V and a rated impulse voltage (Uimp) of 8 kV. It has no normally open (NO) or normally closed (NC) auxiliary contacts. The rated active power ranges from 110kW at 220-230Vac to 280kW at 660-690Vac under AC-3 conditions, with a mechanical durability of 10,000,000 operations at no load. The rated voltage (AC) phase-to-phase is 1000 V.

2 in stock

Manufacturer warranty

JGL36200SALU Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare JGL36200SALU with other Electronic Components products

Breaking Capacity Code

Magnetic Hold Current

Tightening Torque

Magnetic Tripping Current

Height

Continuous Current Rating

Width

Number Of Poles

Depth

Product Or Component Type

Selected product

JGL36200SALU
Backordered
JGL36200SALU
Schneider Electric

Circuit breaker, PowerPacT J, unit mount, thermal-magnetic, 200A, 3 pole 18 kA, 600 VAC, shunt trip,...

Breaking Capacity CodeG

Magnetic Hold Current1000 A

Tightening Torque230.12 lbf.in (26 N.m) 0.15…...

Magnetic Tripping Current2000 A

Height7.52 in (191.01 mm)

Continuous Current Rating80 %

Width4.12 in (104.65 mm)

Number Of Poles3P

Depth5 in (127.00 mm)

Product Or Component TypeCircuit breaker

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Breaking Capacity CodeJ

Magnetic Hold Current-

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Tripping Current-

Height5.39 in (137 mm)

Continuous Current Rating80 %

Width3.19 in (81 mm)

Number Of Poles3P

Depth3.15 in (80 mm)

Product Or Component TypeCircuit breaker

QOB330GFI5237
6 in stock
QOB330GFI5237
Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit B...

Breaking Capacity Code-

Magnetic Hold Current-

Tightening Torque40.71 lbf.in (4.6 N.m) 0.00…...

Magnetic Tripping Current-

Height4.12 in (104.65 mm)

Continuous Current Rating-

Width2.25 in (57.15 mm)

Number Of Poles3P

Depth2.91 in (73.91 mm)

Product Or Component Type-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

JGL36250CU43X on Powermatic Associates

JGL36250CU43X

Verified stock: 0

Square D by Schneider Electric JGL36250CU43X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT JGL sub-range, featuring a PowerPact J-Frame 250 Micrologic 5.2A (LSI) design. It is a 3-pole (3P) device with a rated current of 250A and a rated insulation voltage (Ui) of 750V. This unit is designed for individual unit mount on plate, with a net height of 191 mm, width of 105 mm, and depth of 127 mm. It operates with a toggle (manual) mechanism and offers a degree of protection of IP40. The connection type includes lugs on both load and line sides. Its protection functions include Long-time protection (L), Short-time protection with fixed time delay (S), Instantaneous protection (I), and Zone Selective Interlocking (ZSI). The rated voltage (AC) is 600Vac 600Y/347Vac, with a DC rating of 500Vdc. The protection settings are adjustable for overload (0.3...1 x In), short-circuit with time delay (1.5...10 x lr), and instantaneous protection against short-circuit (1.5...12 x In). The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 250 AT, and the frame current rating is 250 AF. The short circuit breaking rating varies with voltage, up to 65kA at 240Vac under UL489 standards. The trip unit type is an electronic Micrologic Ammeter 5.2A (LSI) with an LCD display, offering current measurements and calculation features for phases and neutral, including RMS instantaneous current, average current, current unbalance, highest RMS current, ground fault current, and demand/peak current values with an adjustable calculation window of 5-60min. The utilisation category is A.

Schneider Electric

JGL36250CU44X on Powermatic Associates

JGL36250CU44X

Verified stock: 0

Square D by Schneider Electric JGL36250CU44X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT JGL sub-range, featuring a PowerPact J-Frame 250 Micrologic 6.2A (LSIG) design. It is a 3-pole (3P) device with a rated current of 250A and a rated insulation voltage (Ui) of 750V. This MCCB operates with a rated voltage (AC) of 600Vac 600Y/347Vac and a rated voltage (DC) of 500Vdc. It is designed for individual unit mount on plate with a net height of 191 mm, width of 105 mm, and depth of 127 mm. The degree of protection is IP40, and it operates via a toggle (manual) mode. The connection type includes lugs on both load and line sides, offering protection functions such as Long-time (L), Short-time with fixed time delay (S), Instantaneous (I), Ground fault (G), and Zone Selective Interlocking (ZSI). Protection settings are adjustable, with L protection against overload adjustable from 0.3 to 1 x In (70A to 250A), S protection against short-circuit with time delay adjustable from 1.5 to 10 x Ir (375A to 2500A), I instantaneous protection against short-circuit adjustable from 1.5 to 12 x In (375A to 3000A), and G protection against earth fault adjustable at 0.2 to 1 x In (0.1 to 0.4s time delay). The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 250 AT, with a frame current rating of 250 AF. The short circuit breaking rating varies by voltage, including 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc and 500Vdc, all according to UL489 standards. The trip unit type is an electronic Micrologic Ammeter 6.2A (LSIG) with LSIG protection and an LCD display. Measurement functions include current measurements for phases (I1 / I2 / I3) and neutral (IN), RMS instantaneous current, average current, current unbalance between phases, highest RMS current of the 3 phases, ground fault current, and demand/peak current values on all 3 phases plus neutral, with a calculation window adjustable between 5-60min. The utilisation category is A.

Schneider Electric

FAQ

Out if stock but available for backorder.

Circuit breaker, PowerPacT J, unit mount, thermal-magnetic, 200A, 3 pole 18 kA, 600 VAC, shunt trip, control wire ON end

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock