Powermatic Associates Logo

LC1D80B5 Schneider Electric Industrial Automation Components

LC1D80B5 on Powermatic Associates
Schneider Electric

Part#:LC1D80B5

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric LC1D80B5 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 125A (AC-1) and 80A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 20.4-26.4Vac (24Vac nom.; 50Hz; 0.85...1.1 x Uc), and the rated operating voltage (Ue) is up to 1000 V. It includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor supports rated active power of 22kW (220-230Vac; AC-3) up to 55kW (500Vac; AC-3), with specific ratings for various voltages and phases, including a rated power (HP) ranging from 7.5HP at 115Vac single-phase to 60HP at 575-600Vac 3-phase. It boasts a mechanical durability of 4,000,000 operations and an electrical durability of 1,500,000 operations with load, with a phase-to-phase rated voltage (AC) of 1000 V.

Product Details

  • Device Short Name
    LC1D
  • Auxiliary Contact Composition
    1 NO + 1 NC
  • Inrush Power In VA
    200 VA 50 Hz 0.75 68 °F (20 °C))
  • [Uimp] Rated Impulse Withstand Voltage
    8 kV IEC 60947
  • Minimum Switching Current
    5 mA signalling circuit
  • Product Or Component Type
    Contactor
  • [Uc] Control Circuit Voltage
    24 V AC 50 Hz
  • Heat Dissipation
    6…10 W 50 Hz
  • Power Pole Contact Composition
    3 NO
  • Average Impedance
    0.8 mOhm - Ith 125 A 50 Hz power circuit
  • Mechanical Durability
    10 Mcycles
  • Minimum Switching Voltage
    17 V signalling circuit
  • Range
    TeSys
  • Rated Breaking Capacity
    1100 A 440 V power circuit IEC 60947
  • Coil Technology
    Without built-in suppressor module
  • Product Name
    TeSys D
  • Control Circuit Type
    AC at 50 Hz
  • Poles Description
    3P
  • Overvoltage Category
    III
  • Front Cover
    With
  • Maximum Operating Rate
    3600 cyc/h 140 °F (60 °C)
  • Hold-In Power Consumption In VA
    20 VA 50 Hz 0.3 68 °F (20 °C))
  • Signalling Circuit Frequency
    25...400 Hz
  • Insulation Resistance
    > 10 MOhm signalling circuit
  • [Ue] Rated Operational Voltage
    Power circuit <= 1000 V AC 25...400 Hz Power circuit <= 300 V DC
  • Non-Overlap Time
    1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
  • Mounting Support
    Rail Plate
  • [Ui] Rated Insulation Voltage
    Power circuit 1000 V IEC 60947-4-1 Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL
  • Power Dissipation Per Pole
    5.1 W AC-3 12.5 W AC-1
  • Auxiliary Contacts Type
    Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
  • [Ith] Conventional Free Air Thermal Current
    10 A 140 °F (60 °C) signalling circuit 125 A 140 °F (60 °C) power circuit
  • Operating Time
    20...35 ms closing 6...20 ms opening
  • Contactor Application
    Motor control Resistive load
  • [Ie] Rated Operational Current
    80 A 140 °F (60 °C)) <= 440 V AC-3 power circuit 125 A 140 °F (60 °C)) <= 440 V AC-1 power circuit
  • Electrical Durability
    1.5 Mcycles 80 A AC-3 <= 440 V 0.8 Mcycles 125 A AC-1 <= 440 V
  • Safety Reliability Level
    B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
  • Connections - Terminals
    Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flex
  • Utilisation Category
    AC-1 AC-3 AC-4
  • Associated Fuse Rating
    10 A gG signalling circuit IEC 60947-5-1 200 A gG <= 690 V type 1 power circuit 160 A gG <= 690 V type 2 power circuit
  • Irms Rated Making Capacity
    140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 1100 A 440 V power circuit IEC 60947
  • Control Circuit Voltage Limits
    0.3...0.6 Uc -40…158 °F (-40…70 °C) drop-out AC 50 Hz 0.85...1.1 Uc -40…131 °F (-40…55 °C) operational AC 50 Hz 1...1.1 Uc 131…158 °F (55…70 °C) operational AC 50 Hz
  • Tightening Torque
    Power circuit 106.21 lbf.in (12 N.m) connector flat Ø 6 to Ø 8 mm Power circuit 106.21 lbf.in (12 N.m) connector hexagonal 0.16 in (4 mm) Control circuit 10.62 lbf.in (1.2 N.m) screw clamp terminals flat Ø 6 mm Control circuit 10.62 lbf.in
  • Standards
    EN/IEC 60947-4-1 EN/IEC 60947-5-1 UL 60947-4-1 CSA C22.2 No 60947-4-1
  • Motor Power HP (UL / CSA)
    7.5 hp 115 V at AC 60 Hz for 1 phase 15 hp 230/240 V at AC 60 Hz for 1 phase 20 hp 200/208 V at AC 60 Hz for 3 phase 25 hp 230/240 V at AC 60 Hz for 3 phase 60 hp 460/480 V at AC 60 Hz for 3 phase 60 hp 575/600 V at AC 60 Hz for 3
  • [Icw] Rated Short-Time Withstand Current
    135 A 104 °F (40 °C) - 10 min power circuit 320 A 104 °F (40 °C) - 1 min power circuit 640 A 104 °F (40 °C) - 10 s power circuit 990 A 104 °F (40 °C) - 1 s power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling cir
  • Motor Power Kw
    22 kW 220...230 V AC 50 Hz AC-3) 37 kW 380...400 V AC 50 Hz AC-3) 45 kW 415...440 V AC 50 Hz AC-3) 55 kW 500 V AC 50 Hz AC-3) 45 kW 660...690 V AC 50 Hz AC-3) 45 kW 1000 V AC 50 Hz AC-3) 15 kW 400 V AC 50 Hz AC-4)
  • Product Certifications
    UL CSA CCC EAC LROS (Lloyds register of shipping) DNV-GL RINA BV

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1D80B5 on Powermatic Associates is $471.37. Order now.

LC1D80B5 Related Documents

Product Datasheet-1631038579472.pdfInstruction Sheet-1631038579469.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
MGN61508 on Powermatic Associates

MGN61508

Schneider Electric

Schneider Electric MGN61508 is a Miniature Circuit Breaker (MCB) designed for DC applications. It falls under the C60H-DC sub-range and features a rated current of 10A with a rated voltage of 250V DC. This MCB is equipped with 1 pole that is protected and utilizes a C tripping curve.

32 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock
TRV00810 on Powermatic Associates

TRV00810

Schneider Electric

Schneider Electric TRV00810 is a cable designed as part of the communication accessories sub-range, featuring a network cord with 2x male RJ45 connectors. It has a length of 1m.

90 in stock

Manufacturer warranty

LC1D80B5 Schneider Electric

$471.37

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$471.37

$471.37 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LC1D80B5 with other Industrial Automation Components products

Device Short Name

Auxiliary Contact Composi...

Inrush Power In VA

[Uimp] Rated Impulse With...

Minimum Switching Current

Product Or Component Type

[Uc] Control Circuit Volt...

Heat Dissipation

Power Pole Contact Compos...

Average Impedance

Selected product

LC1D80B5
Backordered
LC1D80B5
Schneider Electric

Schneider Electric LC1D80B5 is a magnetic contactor from the Deca sub-range, featuring screw connect...

Device Short NameLC1D

Auxiliary Contact Composition1 NO + 1 NC

Inrush Power In VA200 VA 50 Hz 0.75 68 °F (20 ...

[Uimp] Rated Impulse Withstand Voltage8 kV IEC 60947

Minimum Switching Current5 mA signalling circuit

Product Or Component TypeContactor

[Uc] Control Circuit Voltage24 V AC 50 Hz

Heat Dissipation6…10 W 50 Hz

Power Pole Contact Composition3 NO

Average Impedance0.8 mOhm - Ith 125 A 50 Hz p...

LC1D40ABD
2 in stock
LC1D40ABD
Schneider Electric

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM)...

Device Short NameLC1D

Auxiliary Contact Composition-

Inrush Power In VA-

[Uimp] Rated Impulse Withstand Voltage-

Minimum Switching Current-

Product Or Component TypeContactor

[Uc] Control Circuit Voltage-

Heat Dissipation-

Power Pole Contact Composition3 NO

Average Impedance-

DFCC2
15 in stock
DFCC2
Schneider Electric

Schneider Electric - DFCC2

Device Short NameDFCC

Auxiliary Contact Composition-

Inrush Power In VA-

[Uimp] Rated Impulse Withstand Voltage-

Minimum Switching Current-

Product Or Component TypeFuse carrier

[Uc] Control Circuit Voltage-

Heat Dissipation-

Power Pole Contact Composition-

Average Impedance-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

SDBT-MSX-1L-PU-E-2.5-N-LE on Powermatic Associates

SDBT-MSX-1L-PU-E-2.5-N-LE

Festo

Festo SDBT-MSX-1L-PU-E-2.5-N-LE is a magnetic Hall proximity/position binary sensor designed for energy chains and robot applications. This sensor is part of the SDBT-MSX series and features an automatic teach-in/programmable design. It is constructed with a reinforced PA and high-alloy stainless steel housing, and a TPE-U/PUR cable, ensuring durability. The sensor is pre-wired with a 2.5m 3-core cable terminated with bare end flying leads for easy connection. It operates on a supply voltage of 10-30Vdc, with 12Vdc and 24Vdc as nominal values, and can be mounted using a screw-type mount. The sensor operates within an ambient air temperature range of -40°C to +85°C and offers a degree of protection of IP68, making it suitable for harsh environments. It has a T-slot shape and includes one digital output (switchable PNP; 100mA) with a maximum output switching frequency of 200Hz. The sensor is protected against short-circuit, overload, and reverse polarity for all electrical connections. It features a response time of 2ms for both OFF to ON and ON to OFF transitions, operates in switchable (NO/NC) mode, and can handle a maximum travel speed of 3m/s.

0 in stock

Relevant products

LC1D40ABD on Powermatic Associates

LC1D40ABD

Verified stock: 2

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor is rated for currents of 60A (AC-1) and 40A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. It has a net width of 55 mm and offers a degree of protection rated at IP20. The control voltage (DC) ranges from 18-30Vdc, with a nominal 24Vdc, and it operates at a rated voltage (Ue) of up to 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power spans from 11kW at 220-230Vac to 30kW at 660-690Vac in AC-3 category. The rated power in horsepower (HP) varies from 3HP at 115Vac in single-phase to 30HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D40ABD is up to 6,000,000 operations, and its electrical durability with load reaches 1,500,000 operations. The rated voltage for phase-to-phase connections is 690 V.

Schneider Electric

LC1D50ABD on Powermatic Associates

LC1D50ABD

Verified stock: 0

Schneider Electric LC1D50ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor supports a rated current of 80A for AC-1 and 50A for 440Vac in AC-3 applications. It is designed for DIN rail mounting and has a net width of 55 mm. The device offers an IP20 degree of protection and operates with a control voltage of 18-30Vdc (24Vdc nominal). The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. It delivers rated active power ranging from 15kW at 220-230Vac to 33kW at 660-690Vac in AC-3, and rated power in horsepower (HP) from 3HP at 115Vac to 40HP at 575-600Vac, covering various configurations and voltages for UL/CSA standards. The mechanical durability of the LC1D50ABD is rated at 6,000,000 operations, and its electrical durability with load is 1,450,000 operations. The rated voltage for phase-to-phase applications is 690 V.

Schneider Electric

LC1D65008B7 on Powermatic Associates

LC1D65008B7

Verified stock: 0

Schneider Electric LC1D65008B7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 4 poles (2NO+2NC). It has a rated current of 80A under AC-1 conditions and is suitable for DIN rail mounting. The contactor measures 85 mm in net width and offers an IP20 degree of protection. It operates with a control voltage range of 19.2-26.4Vac at 50Hz (24Vac nominal; 0.8...1.1 x Uc) and 20.4-26.4Vac at 60Hz (24Vac nominal; 0.85...1.1 x Uc). The rated operating voltage (Ue) is up to 690 V, and it has no normally open (NO) or normally closed (NC) auxiliary contacts. The rated impulse voltage (Uimp) is 6 kV, and it boasts a mechanical durability of 15,000,000 operations at no load. The rated voltage for phase-to-phase applications is 690 V AC.

Schneider Electric

LC1D80G6 on Powermatic Associates

LC1D80G6

Verified stock: 0

Schneider Electric LC1D80G6 is a magnetic contactor from the Deca sub-range, designed with screw connections and three poles (3P; 3NO). It has a rated current of 125A for AC-1 and 80A for 440Vac in AC-3 conditions. This contactor is suitable for DIN rail mounting and has a net width of 85 mm. It offers a degree of protection rated at IP20 and operates with a control voltage of 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc). The rated operating voltage (Ue) is up to 1000 V, and it features 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power ranges from 22kW at 220-230Vac to 55kW at 500Vac in AC-3 conditions. The rated power in horsepower (HP) varies from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase conditions, according to UL/CSA standards. The mechanical durability of the LC1D80G6 is rated at 4,000,000 operations, and its electrical durability with load is 1,500,000 operations. The rated voltage for phase-to-phase connections is 1000 V.

Schneider Electric

LC1D80G7 on Powermatic Associates

LC1D80G7

Verified stock: 0

Schneider Electric LC1D80G7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 125A (AC-1) and 80A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor supports rated active power ranging from 22kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. The rated power (HP) varies from 7.5HP at 115Vac single-phase to 60HP at 575-600Vac three-phase, under UL/CSA standards. It boasts a mechanical durability of 4,000,000 operations and an electrical durability of 1,500,000 operations with load, at a phase-to-phase rated voltage of 1000 V.

Schneider Electric

FAQ

What is the price of LC1D80B5?
Purchase the LC1D80B5 from Powermatic Associates at the price of $471.37. Order today.

Out if stock but available for backorder.

Schneider Electric LC1D80B5 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 125A (AC-1) and 80A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 20.4-26.4Vac (24Vac nom.; 50Hz; 0.85...1.1 x Uc), and the rated operating voltage (Ue) is up to 1000 V. It includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor supports rated active power of 22kW (220-230Vac; AC-3) up to 55kW (500Vac; AC-3), with specific ratings for various voltages and phases, including a rated power (HP) ranging from 7.5HP at 115Vac single-phase to 60HP at 575-600Vac 3-phase. It boasts a mechanical durability of 4,000,000 operations and an electrical durability of 1,500,000 operations with load, with a phase-to-phase rated voltage (AC) of 1000 V.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts