LC1D95FE7 Schneider Electric Industrial Automation Components

LC1D95FE7 on Powermatic Associates
Schneider Electric

Part#:LC1D95FE7

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric LC1D95FE7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 125A under AC-1 conditions and 95A at 440Vac under AC-3 conditions. This contactor is suitable for DIN rail mounting and has a net width of 85 mm. It offers a degree of protection rated at IP20 and operates with a control voltage range of 92-126Vac at 50Hz and 98-126Vac at 60Hz, with a nominal control voltage of 115Vac. The rated operating voltage (Ue) is up to 1000 V, and it includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power spans from 25kW at 220-230Vac to 45kW at up to 690Vac and 45kW at 1000Vac under AC-3 conditions. The rated power in horsepower (HP) ranges from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase, according to UL/CSA standards. The mechanical durability of the LC1D95FE7 is rated at 4,000,000 operations, and its electrical durability with load is 1,200,000 operations. The rated voltage for phase-to-phase connections is 1000 V.

Product Details

  • Product Name
    TeSys D
  • [Uc] Control Circuit Voltage
    115 V AC 50/60 Hz
  • Product Or Component Type
    Contactor
  • [Uimp] Rated Impulse Withstand Voltage
    8 kV IEC 60947
  • Average Impedance
    0.8 mOhm - Ith 125 A 50 Hz power circuit
  • Poles Description
    3P
  • Power Pole Contact Composition
    3 NO
  • Rated Breaking Capacity
    1100 A 440 V power circuit IEC 60947
  • Front Cover
    With
  • Range
    TeSys
  • Overvoltage Category
    III
  • Mechanical Durability
    4 Mcycles
  • Minimum Switching Voltage
    17 V signalling circuit
  • Device Short Name
    LC1D
  • Control Circuit Type
    AC 50/60 Hz
  • Auxiliary Contact Composition
    1 NO + 1 NC
  • Minimum Switching Current
    5 mA signalling circuit
  • [Ue] Rated Operational Voltage
    Power circuit 1000 V AC 25...400 Hz
  • Coil Technology
    Without built-in suppressor module
  • Signalling Circuit Frequency
    25...400 Hz
  • Insulation Resistance
    > 10 MOhm signalling circuit
  • Maximum Operating Rate
    3600 cyc/h 140 °F (60 °C)
  • Heat Dissipation
    6…10 W 50/60 Hz
  • [Ith] Conventional Free Air Thermal Current
    10 A 140 °F (60 °C) signalling circuit 125 A 140 °F (60 °C) power circuit
  • Contactor Application
    Motor control Resistive load
  • [Ie] Rated Operational Current
    95 A 140 °F (60 °C)) <= 440 V AC-3 power circuit 125 A 140 °F (60 °C)) <= 690 V AC-1 power circuit
  • Inrush Power In VA
    245 VA 60 Hz 0.75 68 °F (20 °C)) 245 VA 50 Hz 0.75 68 °F (20 °C))
  • Hold-In Power Consumption In VA
    26 VA 60 Hz 0.3 68 °F (20 °C)) 26 VA 50 Hz 0.3 68 °F (20 °C))
  • Non-Overlap Time
    1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
  • Operating Time
    20...35 ms closing 6...20 ms opening
  • Electrical Durability
    1.2 Mcycles 95 A AC-3 1.3 Mcycles 125 A AC-1
  • Mounting Support
    Rail Plate
  • Auxiliary Contacts Type
    Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
  • Safety Reliability Level
    B10d = 1.3 Mcycles contactor with nominal load EN/ISO 13849-1 B10d = 20 Mcycles contactor with mechanical load EN/ISO 13849-1
  • Power Dissipation Per Pole
    12.5 W AC-1 7.2 W AC-3
  • Associated Fuse Rating
    10 A gG signalling circuit IEC 60947-5-1 200 A gG <= 690 V type 1 power circuit 160 A gG <= 690 V type 2 power circuit
  • Irms Rated Making Capacity
    1100 A 440 V AC power circuit IEC 60947 140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1
  • Utilisation Category
    AC-1 AC-3 AC-4
  • Connections - Terminals
    Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flex
  • Tightening Torque
    Control circuit 10.62 lbf.in (1.2 N.m) screw clamp terminals flat Ø 6 mm Control circuit 10.62 lbf.in (1.2 N.m) screw clamp terminals Philips No 2 Power circuit 106.21 lbf.in (12 N.m) connector flat Ø 6 to Ø 8 mm Power circuit 106.21 lbf.in
  • Control Circuit Voltage Limits
    0.8...1.1 Uc -40…131 °F (-40…55 °C) operational AC 50 Hz 0.85...1.1 Uc -40…131 °F (-40…55 °C) operational AC 60 Hz 0.3...0.6 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz 1...1.1 Uc 131…158 °F (55…70 °C) operational AC 50/60 Hz
  • [Icw] Rated Short-Time Withstand Current
    1100 A 104 °F (40 °C) - 1 s power circuit 800 A 104 °F (40 °C) - 10 s power circuit 400 A 104 °F (40 °C) - 1 min power circuit 135 A 104 °F (40 °C) - 10 min power circuit 140 A - 100 ms signalling circuit 120 A - 500 ms signalling
  • Product Certifications
    IECEE CB Scheme UL CSA CCC EAC LROS (Lloyds register of shipping) RINA BV DNV-GL
  • [Ui] Rated Insulation Voltage
    Power circuit 1000 V IEC 60947-4-1 Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL
  • Motor Power Kw
    25 kW 220...230 V AC 50 Hz AC-3) 45 kW 380...400 V AC 50 Hz AC-3) 45 kW 415...440 V AC 50 Hz AC-3) 55 kW 500 V AC 50 Hz AC-3) 45 kW 660...690 V AC 50 Hz AC-3) 45 kW 1000 V AC 50 Hz AC-3)
  • Motor Power HP (UL / CSA)
    7.5 hp 115 V at AC 60 Hz for 1 phase 15 hp 230/240 V at AC 60 Hz for 1 phase 25 hp 200/208 V at AC 60 Hz for 3 phase 30 hp 230/240 V at AC 60 Hz for 3 phase 60 hp 460/480 V at AC 60 Hz for 3 phase 60 hp 575/600 V at AC 60 Hz for 3
  • Standards
    EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 UL 60947-4-1 UL 60947-5-1 CSA C22.2 No 60947-4-1 CSA C22.2 No 60947-5-1 GB/T 14048.4

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1D95FE7 on Powermatic Associates is $589.15. Order now.



Similar products from: Schneider Electric Industrial Automation Components

Manufacturer warranty

LC1D95FE7 Schneider Electric

$589.15

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$589.15

$589.15 each

Average response time: 11 minutes

Worldwide Shipping and Delivery


Secure Payment Processing


Warranty


Responsive Customer Support

Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare LC1D95FE7 with other Industrial Automation Components products

Product Name

[Uc] Control Circuit Volt...

Product Or Component Type

[Uimp] Rated Impulse With...

Average Impedance

Poles Description

Power Pole Contact Compos...

Rated Breaking Capacity

Front Cover

Range

Selected product

LC1D95FE7
Backordered
LC1D95FE7
Schneider Electric

Schneider Electric LC1D95FE7 is a magnetic contactor from the Deca sub-range, featuring screw connec...

Product NameTeSys D

[Uc] Control Circuit Voltage115 V AC 50/60 Hz

Product Or Component TypeContactor

[Uimp] Rated Impulse Withstand Voltage8 kV IEC 60947

Average Impedance0.8 mOhm - Ith 125 A 50 Hz p...

Poles Description3P

Power Pole Contact Composition3 NO

Rated Breaking Capacity1100 A 440 V power circuit I...

Front CoverWith

RangeTeSys

LC1D40ABD
2 in stock
LC1D40ABD
Schneider Electric

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM)...

Product NameTeSys D

[Uc] Control Circuit Voltage-

Product Or Component TypeContactor

[Uimp] Rated Impulse Withstand Voltage-

Average Impedance-

Poles Description3P

Power Pole Contact Composition3 NO

Rated Breaking Capacity-

Front Cover-

RangeTeSys

DFCC2
14 in stock
DFCC2
Schneider Electric

Schneider Electric - DFCC2

Product NameTeSys DF

[Uc] Control Circuit Voltage-

Product Or Component TypeFuse carrier

[Uimp] Rated Impulse Withstand Voltage-

Average Impedance-

Poles Description2P

Power Pole Contact Composition-

Rated Breaking Capacity-

Front Cover-

RangeTeSys

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

FAQ

What is the price of LC1D95FE7?
Purchase the LC1D95FE7 from Powermatic Associates at the price of $589.15. Order today.

Out if stock but available for backorder.

Schneider Electric LC1D95FE7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 125A under AC-1 conditions and 95A at 440Vac under AC-3 conditions. This contactor is suitable for DIN rail mounting and has a net width of 85 mm. It offers a degree of protection rated at IP20 and operates with a control voltage range of 92-126Vac at 50Hz and 98-126Vac at 60Hz, with a nominal control voltage of 115Vac. The rated operating voltage (Ue) is up to 1000 V, and it includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power spans from 25kW at 220-230Vac to 45kW at up to 690Vac and 45kW at 1000Vac under AC-3 conditions. The rated power in horsepower (HP) ranges from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase, according to UL/CSA standards. The mechanical durability of the LC1D95FE7 is rated at 4,000,000 operations, and its electrical durability with load is 1,200,000 operations. The rated voltage for phase-to-phase connections is 1000 V.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts