Powermatic Associates Logo

LGL36400CU31XSA Schneider Electric Electronic Components

LGL36400CU31XSA on Powermatic Associates
Schneider Electric

Part#:LGL36400CU31XSA

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Circuit breaker, PowerPact L, unit mount, Micrologic 3.3, 400A, 3 pole, 18 kA, 600 VAC, 100% rated, shunt trip

Product Details

  • Height
    11.3 in (287.02 mm)
  • Terminal Identifier
    AL600LS52K3
  • Depth
    6.61 in (167.89 mm)
  • Product Or Component Type
    Circuit breaker
  • Tightening Torque
    442.54 lbf.in (50 N.m) 0.11…0.37 in² (70…240 mm²) (AWG 2/0...500 kcmil)
  • Continuous Current Rating
    100 %
  • Width
    5.5 in (139.70 mm)
  • Number Of Poles
    3P
  • Breaking Capacity Code
    G
  • Electrical Connection
    Lugs load Lugs line

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

LGL36400CU31XSA Related Documents

Catalog-1631038731242.pdfProduct Datasheet-1631038731247.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

6 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

0 in stock
M9U31110 on Powermatic Associates

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

1 in stock
BJF36035 on Powermatic Associates

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BJF sub-range. It features a PowerPact B-Frame 100 TMD 3P-3t design, with a rated current of 35A and a rated voltage of 600Vac 600Y/347Vac. The breaker is designed for a fixed busbar connection with a term. nut kit on both line and load sides, offering a degree of protection of IP40. It has a mechanical durability of 15,000 operations and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) device has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It operates within Utilisation category A and has protection settings for over-current fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated impulse voltage (Uimp) is 8 kV, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 690 V. It provides thermal and magnetic protection functions, with a trip current rating of 35 AT and an electrical durability of 10,000 operations at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mode. The short circuit breaking rating varies by voltage, with 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Y/347Vac, and 50kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

7 in stock
QOB315EPD5237 on Powermatic Associates

QOB315EPD5237

Schneider Electric

Square D by Schneider Electric QOB315EPD5237 is a Miniature Circuit Breaker (MCB) designed with Equipment Protection Device (EPD) functionality, offering ground fault protection. This bolt-on mounted MCB operates with a rated current of 15A and a connection type that also utilizes a bolt-on mechanism. It is designed for use with a rated voltage (AC) of 240 V and can accommodate a wire cross-section of 14-8AWG (1 cable Cu). The QOB315EPD5237 features 3 poles and has a residual current sensitivity of 30mA / 0.03. Its protection functions include ground fault protection, and it has a short circuit breaking rating of 10kA at 240Vac. The type of terminals used in this MCB is ring tongue.

1 in stock

Manufacturer warranty

LGL36400CU31XSA Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LGL36400CU31XSA with other Electronic Components products

Height

Terminal Identifier

Depth

Product Or Component Type

Tightening Torque

Continuous Current Rating

Width

Number Of Poles

Breaking Capacity Code

Electrical Connection

Selected product

LGL36400CU31XSA
Backordered
LGL36400CU31XSA
Schneider Electric

Circuit breaker, PowerPact L, unit mount, Micrologic 3.3, 400A, 3 pole, 18 kA, 600 VAC, 100% rated, ...

Height11.3 in (287.02 mm)

Terminal IdentifierAL600LS52K3

Depth6.61 in (167.89 mm)

Product Or Component TypeCircuit breaker

Tightening Torque442.54 lbf.in (50 N.m) 0.11…...

Continuous Current Rating100 %

Width5.5 in (139.70 mm)

Number Of Poles3P

Breaking Capacity CodeG

Electrical ConnectionLugs load Lugs line

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Height5.39 in (137 mm)

Terminal Identifier-

Depth3.15 in (80 mm)

Product Or Component TypeCircuit breaker

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Continuous Current Rating80 %

Width3.19 in (81 mm)

Number Of Poles3P

Breaking Capacity CodeJ

Electrical ConnectionTerminal nut ON and OFF end

QOB330GFI5237
6 in stock
QOB330GFI5237
Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit B...

Height4.12 in (104.65 mm)

Terminal Identifier-

Depth2.91 in (73.91 mm)

Product Or Component Type-

Tightening Torque40.71 lbf.in (4.6 N.m) 0.00…...

Continuous Current Rating-

Width2.25 in (57.15 mm)

Number Of Poles3P

Breaking Capacity Code-

Electrical ConnectionRing tongue

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

LGL36600U53XENAAUOYH1 on Powermatic Associates

LGL36600U53XENAAUOYH1

Verified stock: 2

Square D by Schneider Electric LGL36600U53XENAAUOYH1 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGL sub-range. It features a factory-installed 24Vdc undervoltage (U/V) trip release coil and a factory-installed 1A/1B (1NO+1NC) auxiliary switch OF wire harness. Designed for PowerPacT L-Frame, this 3-pole (3P) breaker has a rated current of 600A and operates at a rated voltage of 600Vac and 600Y/347Vac, with a rated insulation voltage (Ui) of 750V. It offers long-time (L), short-time with fixed time delay (S), instantaneous (I), and Zone Selective Interlocking (ZSI) protection functions. The breaker is equipped with lugs on both load and line sides for connection and is designed for individual unit mount on plate. It has a net height of 382mm, width of 153mm, depth of 171mm, and offers a degree of protection of IP40. The operating mode is manual toggle, with protection settings adjustable for overload, short-circuit with time delay, and instantaneous protection against short-circuit. The control voltage for the undervoltage trip coil allows circuit breaker opening at 35% to 70% of its rated control voltage, with closing permitted when the supply voltage reaches 85% of rated control voltage. The rated operating voltage (Ue) is 690V, with a rated impulse voltage (Uimp) of 8kV. The trip current rating is 600 AT, with a frame current rating of 600 AF. It has a short circuit breaking rating of up to 65kA at 240Vac under UL489 standards. The trip unit type is an electronic Micrologic Energy 5.3E (LSI) with an LCD display, offering comprehensive measurement functions for current, voltage, power, energy metering, power quality, and harmonic analysis. The utilisation category is A.

Schneider Electric

LGL36400U31X on Powermatic Associates

LGL36400U31X

Verified stock: 1

Square D by Schneider Electric LGL36400U31X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGL sub-range, featuring a PowerPact L-Frame 600 Micrologic 3.3 (LI) design. It is a 3-pole (3P) device with a rated current of 400A and a rated insulation voltage (Ui) of 750 V. The rated voltage (AC) is 600Vac 600Y/347Vac, and it supports a mounting mode of individual unit mount on plate. The dimensions include a net height of 382 mm, a net width of 153 mm, and a net depth of 171 mm. It offers a degree of protection of IP40 and operates manually via a toggle. The protection functions include L (Long-time protection) and I (Instantaneous protection), with protection settings adjustable for overload (0.3...1 x In, 125A...400A) and instantaneous protection against short-circuit (1.5...12 x In, 600A...4800A). The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 400 AT, and the frame current rating is 600 AF. The short circuit breaking rating varies with voltage, up to 65kA at 240Vac under UL489 standards. Connection type is lugs on both load and line sides, and the trip unit type is an electronic Micrologic Standard 3.3 (LI) with no display, categorized under utilisation category A.

Schneider Electric

LGL36400CU44X on Powermatic Associates

LGL36400CU44X

Verified stock: 0

Square D by Schneider Electric LGL36400CU44X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGL sub-range, designed as a PowerPact L-Frame 600 Micrologic 6.3A (LSIG) 3P 400A 600Vac 18kA with lugs 100% rated for connections on both load and line sides. It features three poles (3P) and offers protection functions including Long-time (L), Short-time with fixed time delay (S), Instantaneous (I), Ground fault (G), and Zone Selective Interlocking (ZSI). The rated current is 400A, with a rated insulation voltage (Ui) of 750 V, and a rated voltage (AC) of 600Vac 600Y/347Vac. It is designed for individual unit mount on plate, with dimensions of 382 mm in height, 153 mm in width, and 171 mm in depth, and has an IP40 degree of protection. The operating mode is manual toggle, with protection settings adjustable for overload (L), short-circuit with time delay (S), instantaneous protection against short-circuit (I), and earth fault (G). The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 400 AT, with a frame current rating of 600 AF, and a short circuit breaking rating varying from 65kA at 240Vac to 20kA at 500Vdc, according to UL489 standards. The trip unit type features electronic technology with a Micrologic 6.3A (LSIG) series, providing LSIG protection and an LCD display. Its measurement function includes current measurements for phases and neutral, RMS instantaneous current, current unbalance between phases, highest RMS current of the 3 phases, ground fault current, and demand/peak current values on all 3 phases plus neutral, with a calculation window adjustable between 5-60 minutes. The utilisation category is A.

Schneider Electric

LGL36400CU33X on Powermatic Associates

LGL36400CU33X

Verified stock: 0

Square D by Schneider Electric LGL36400CU33X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGL sub-range, designed as a PowerPact L-Frame 600 Micrologic 3.3S (LSI) with 3 poles (3P) and a rated current of 400A. It operates at a rated insulation voltage (Ui) of 750 V and a rated voltage (AC) of 600Vac 600Y/347Vac. This unit features lugs on both load and line sides for connection, offers long-time (L), short-time with fixed time delay (S), and instantaneous (I) protection functions, and supports a mounting mode of individual unit mount on plate. The MCCB has a net height of 382 mm, width of 153 mm, depth of 171 mm, and provides a degree of protection of IP40 with a toggle (manual) operating mode. Protection settings include adjustable overload protection (0.3...1 x In, 125A...400A), short-circuit protection with time delay (1.5...10 x lr, 600A...4000A), and instantaneous protection against short-circuit (1.5...12 x In, 600A...4800A). It features a rated operating voltage (Ue) of 690 V, rated impulse voltage (Uimp) of 8 kV, a trip current rating of 400 AT, a frame current rating of 600 AF, and a short circuit breaking rating that varies by voltage level, with a maximum of 65kA at 240Vac under UL489 standards. The trip unit type is an electronic Micrologic Standard 3.3S (LSI) without a display, categorized under utilisation category A.

Schneider Electric

LGL36600M38X on Powermatic Associates

LGL36600M38X

Verified stock: 0

Square D by Schneider Electric LGL36600M38X is a Motor Protection Circuit Breaker (MPCB) within the PowerPacT LGL sub-range, designed for electronic motor protection, manual motor starting, and motor circuit protection. This PowerPacT L-Frame 600 Micrologic 2.3M (LSI) model features a 3-pole (3P) configuration with a rated current of 600A and a Full Load Amperes (FLA) rating of 520A. It operates at a rated insulation voltage (Ui) of 750 V and an AC rated voltage of 600Vac 600Y/347Vac. The device offers long-time (L), short-time with fixed time delay (S), and instantaneous (I) protection functions, with adjustable overload protection settings from 0.6 to 1 times the rated current (312A to 520A) and short-circuit protection with time delay settings adjustable from 5 to 13 times the rated current (3000A to 7800A). Instantaneous protection is fixed at 7200A. It features lugs on both load and line sides for connection, has a net height of 382 mm, width of 153 mm, and depth of 171 mm, and is protected to IP40. The breaker is designed for individual unit mount on a plate, operates with a toggle (manual) mechanism, and has a rated operating voltage (Ue) of 690 V, with a rated impulse voltage (Uimp) of 8 kV. The frame and trip current ratings are both 600A, with a short circuit breaking rating ranging from 18kA to 65kA, depending on the voltage. The trip unit employs an electronic Micrologic 2.3M (LSI) technology without a display, categorized under utilisation category A.

Schneider Electric

FAQ

Out if stock but available for backorder.

Circuit breaker, PowerPact L, unit mount, Micrologic 3.3, 400A, 3 pole, 18 kA, 600 VAC, 100% rated, shunt trip

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

ZB4BS84430 on Powermatic Associates

ZB4BS84430

Schneider Electric

Schneider Electric ZB4BS84430 is a push-button designed for emergency switching OFF (ESO) or shutdown (ESD) functions within the XB4 sub-range. It features a chromium-plated bezel made of metal, ensuring durability and a sleek appearance. The button is round in shape, with a mushroom head diameter of 22 mm and a base diameter of 40 mm. It offers a high degree of protection with ratings of IP66, IP69, IP69K, NEMA 4X, and NEMA 13, suitable for demanding environments. The mechanical durability of this component is rated at 300,000 operations at no load, indicating its longevity. Dimensions include a net height of 40 mm, depth of 57 mm, and width of 40 mm. It is equipped with 1 NC (Normally Closed) auxiliary contact for connectivity. The operating mode of the ZB4BS84430 allows for both turn-to-release and stay-put (maintained/latched) actions, providing flexibility in emergency situations.

1 in stock