LP1D40008GD Schneider Electric Industrial Automation Components

Product Details

• Product Or Component Type
  Contactor
• [Ith] Conventional Free Air Thermal Current
  60 A 140 °F (60 °C) power circuit
• Power Dissipation Per Pole
  5.4 W AC-1
• Mechanical Durability
  10 Mcycles
• Product Name
  TeSys D
• [Ie] Rated Operational Current
  60 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit
• Rated Breaking Capacity
  800 A 440 V power circuit IEC 60947
• Time Constant
  75 ms
• Electrical Durability
  1.4 Mcycles 60 A AC-1 <= 440 V
• Poles Description
  4P
• [Uc] Control Circuit Voltage
  125 V DC
• Contactor Application
  Resistive load
• Power Pole Contact Composition
  2 NO + 2 NC
• Irms Rated Making Capacity
  800 A 440 V power circuit IEC 60947
• Front Cover
  Without
• Maximum Operating Rate
  3600 cyc/h 140 °F (60 °C)
• Device Short Name
  LP1D
• Coil Type
  DC standard
• Hold-In Power Consumption In W
  22 W 68 °F (20 °C)
• Coil Technology
  Built-in bidirectional peak limiting diode suppressor
Range
TeSys
Overvoltage Category
III
Utilisation Category
AC-1
[Uimp] Rated Impulse Withstand Voltage
6 kV IEC 60947
Average Impedance
1.5 mOhm - Ith 60 A 50 Hz power circuit
Inrush Power In W
22 W 68 °F (20 °C)
Mounting Support
Rail Plate
Safety Reliability Level
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Operating Time
4...19 ms opening 12...26 ms closing
[Ue] Rated Operational Voltage
Power circuit <= 690 V AC 25...400 Hz Power circuit <= 300 V DC
Associated Fuse Rating
80 A gG <= 690 V type 1 power circuit 80 A gG <= 690 V type 2 power circuit
[Ui] Rated Insulation Voltage
Power circuit 690 V IEC 60947-4-1 Power circuit 600 V CSA Power circuit 600 V UL
Connections - Terminals
Power circuit screw clamp terminals 1 0.00…0.05 in² (1…35 mm²)flexible without cable end Power circuit screw clamp terminals 2 0.00…0.04 in² (1…25 mm²)flexible without cable end Power circuit screw clamp terminals 1 0.00…0.05 in² (1…35 mm²)flexi
Tightening Torque
Power circuit 70.81 lbf.in (8 N.m) screw clamp terminals 0.04…0.05 in² (25…35 mm²) hexagonal 0.16 in (4 mm) Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Phi
Control Circuit Voltage Limits
0.1...0.3 Uc -40…158 °F (-40…70 °C) drop-out DC 0.85...1.1 Uc -40…131 °F (-40…55 °C) operational DC 1...1.1 Uc 131…158 °F (55…70 °C) operational DC
[Icw] Rated Short-Time Withstand Current
72 A 104 °F (40 °C) - 10 min power circuit 165 A 104 °F (40 °C) - 1 min power circuit 320 A 104 °F (40 °C) - 10 s power circuit 720 A 104 °F (40 °C) - 1 s power circuit
Standards
CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
Product Certifications
BV CCC CSA DNV EAC GL LROS (Lloyds register of shipping) UL

LP1D40008GD Related Documents