Powermatic Associates Logo

LC1DT206BL Schneider Electric Industrial Automation Components

LC1DT206BL on Powermatic Associates
Schneider Electric

Part#:LC1DT206BL

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Only 3 left in stock. Order Now!

Oct 28, 2026

Product description

Schneider Electric LC1DT206BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W of power. It features ring-lugs connections and is equipped with 4 poles (4NO) for comprehensive circuit control. This contactor is rated for a current of 20A under AC-1 conditions and can be mounted on a DIN rail for easy installation. With a net width of 45 mm and an IP20 degree of protection, it ensures a compact and secure setup. The control voltage ranges from 19.2 to 30Vdc, with a nominal 24Vdc, allowing for flexible operation within 0.8 to 1.25 times the control voltage (Uc). It includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both designed for instantaneous operation. The LC1DT206BL boasts a mechanical durability of 15 million operations at no load and can handle rated impulse voltages up to 6 kV. It supports a phase-to-phase rated voltage up to 690 V AC, ensuring compatibility with a wide range of electrical systems.

Product Details

  • Contactor Application
    Resistive load
  • [Uimp] Rated Impulse Withstand Voltage
    6 kV IEC 60947
  • Front Cover
    With
  • Signalling Circuit Frequency
    25...400 Hz
  • Utilisation Category
    AC-1
  • Auxiliary Contact Composition
    1 NO + 1 NC
  • Product Name
    TeSys D
  • Control Circuit Type
    DC low consumption
  • Inrush Power In W
    2.4 W 68 °F (20 °C))
  • Device Short Name
    LC1D
  • Rated Breaking Capacity
    250 A 440 V power circuit IEC 60947
  • Time Constant
    40 ms
  • Product Or Component Type
    Contactor
  • [Uc] Control Circuit Voltage
    24 V DC
  • Power Pole Contact Composition
    4 NO
  • Average Impedance
    2.5 mOhm - Ith 20 A 50 Hz power circuit
  • Coil Technology
    Built-in bidirectional peak limiting diode suppressor
  • Range
    TeSys
  • Overvoltage Category
    III
  • Power Dissipation Per Pole
    1.56 W AC-1
  • Mechanical Durability
    30 Mcycles
  • Minimum Switching Voltage
    17 V signalling circuit
  • [Ie] Rated Operational Current
    20 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit
  • Poles Description
    4P
  • Hold-In Power Consumption In W
    2.4 W 68 °F (20 °C)
  • Insulation Resistance
    > 10 MOhm signalling circuit
  • Minimum Switching Current
    5 mA signalling circuit
  • Maximum Operating Rate
    3600 cyc/h 140 °F (60 °C)
  • Connections - Terminals
    Control circuit lugs-ring terminals 0.31 in (8 mm)) Power circuit lugs-ring terminals 0.31 in (8 mm))
  • Auxiliary Contacts Type
    Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
  • Mounting Support
    Rail Plate
  • [Ue] Rated Operational Voltage
    Power circuit <= 690 V AC 25...400 Hz Power circuit <= 300 V DC
  • [Ith] Conventional Free Air Thermal Current
    10 A 140 °F (60 °C) signalling circuit 20 A 140 °F (60 °C) power circuit
  • Safety Reliability Level
    B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
  • Non-Overlap Time
    1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
  • Operating Time
    65.45...88.55 ms closing 20...30 ms opening
  • Control Circuit Voltage Limits
    0.1...0.3 Uc -40…158 °F (-40…70 °C) drop-out DC 0.8...1.25 Uc -40…140 °F (-40…60 °C) operational DC 1...1.25 Uc 140…158 °F (60…70 °C) operational DC
  • Irms Rated Making Capacity
    140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 250 A 440 V power circuit IEC 60947
  • Associated Fuse Rating
    10 A gG signalling circuit IEC 60947-5-1 25 A gG <= 690 V type 1 power circuit 20 A gG <= 690 V type 2 power circuit
  • Standards
    CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
  • Tightening Torque
    Control circuit 15.05 lbf.in (1.7 N.m) lugs-ring terminals flat Ø 6 mm M3.5 Control circuit 15.05 lbf.in (1.7 N.m) lugs-ring terminals Philips No 2 M3.5 Power circuit 15.05 lbf.in (1.7 N.m) lugs-ring terminals flat Ø 6 mm M3.5 Power circuit
  • [Ui] Rated Insulation Voltage
    Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL Power circuit 690 V IEC 60947-4-1
  • [Icw] Rated Short-Time Withstand Current
    30 A 104 °F (40 °C) - 10 min power circuit 61 A 104 °F (40 °C) - 1 min power circuit 105 A 104 °F (40 °C) - 10 s power circuit 210 A 104 °F (40 °C) - 1 s power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circu
  • Product Certifications
    UL GOST CSA RINA CCC BV LROS (Lloyds register of shipping) DNV GL

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1DT206BL on Powermatic Associates is $158.00. Order now.

LC1DT206BL Related Documents

Product Datasheet-1631042361074.pdfInstruction Sheet-1631042361077.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
BDL36070 on Powermatic Associates

BDL36070

Schneider Electric

Square D by Schneider Electric BDL36070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDL sub-range, featuring a PowerPact B-Frame 100 TMD 3P 70A design for 600Y/347Vac with a 14kA breaking capacity and 80% rated Everlink (Creep compensating) lugs on both line and load sides. It has a rated impulse voltage (Uimp) of 8 kV and offers a degree of protection of IP40. The rated current is 70A, with a rated voltage (AC) of 600Vac 600Y/347Vac. It boasts a mechanical durability of 20,000 operations at no load and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) circuit breaker has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It falls under utilisation category A and features over-current protection fixed at 70A, short-circuit hold current fixed at 640A, and short-circuit trip current fixed at 960A. The rated voltage (DC) is 250Vdc, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 525 V. It provides thermal protection for overload and magnetic protection for short-circuits, with a trip current rating of 70 AT and an electrical durability of 10,000 operations with load at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mechanism. The short circuit breaking rating varies by voltage, with 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, and 14kA at 600Y/347Vac according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

0 in stock
TRV00810 on Powermatic Associates

TRV00810

Schneider Electric

Schneider Electric TRV00810 is a cable designed as part of the communication accessories sub-range, featuring a network cord with 2x male RJ45 connectors. It has a length of 1m.

52 in stock
TRV00880 on Powermatic Associates

TRV00880

Schneider Electric

Schneider Electric TRV00880 is a mounting accessory designed for use within the communication accessories sub-range. It functions as a ULP (Universal Logic Plug) line termination component, facilitating the termination of communication lines in automation systems.

25 in stock

This item can ship within 24h!

Manufacturer warranty

LC1DT206BL Schneider Electric

$158.00

Your price can be lower.
Log in or Create account to check your discount

Stock:

3

Select Qty:

$158.00

$158.00 each

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LC1DT206BL with other Industrial Automation Components products

Contactor Application

[Uimp] Rated Impulse With...

Front Cover

Signalling Circuit Freque...

Utilisation Category

Auxiliary Contact Composi...

Product Name

Control Circuit Type

Inrush Power In W

Device Short Name

Selected product

LC1DT206BL
3 in stock
LC1DT206BL
Schneider Electric

Schneider Electric LC1DT206BL is a magnetic contactor from the Deca sub-range, designed with a low-c...

Contactor ApplicationResistive load

[Uimp] Rated Impulse Withstand Voltage6 kV IEC 60947

Front CoverWith

Signalling Circuit Frequency25...400 Hz

Utilisation CategoryAC-1

Auxiliary Contact Composition1 NO + 1 NC

Product NameTeSys D

Control Circuit TypeDC low consumption

Inrush Power In W2.4 W 68 °F (20 °C))

Device Short NameLC1D

LC1DT20BL
2 in stock
LC1DT20BL
Schneider Electric

Schneider Electric LC1DT20BL is a magnetic contactor from the Deca sub-range, designed with a low-co...

Contactor ApplicationResistive load

[Uimp] Rated Impulse Withstand Voltage-

Front Cover-

Signalling Circuit Frequency-

Utilisation CategoryAC-1

Auxiliary Contact Composition-

Product NameTeSys D

Control Circuit TypeDC low consumption

Inrush Power In W-

Device Short NameLC1D

LC1D256BL
4 in stock
LC1D256BL
Schneider Electric

Schneider Electric LC1D256BL is a magnetic contactor from the Deca sub-range, designed with a low-co...

Contactor ApplicationMotor control Resistive load

[Uimp] Rated Impulse Withstand Voltage-

Front Cover-

Signalling Circuit Frequency-

Utilisation CategoryAC-1 AC-3 AC-4

Auxiliary Contact Composition-

Product NameTeSys D

Control Circuit TypeDC low consumption

Inrush Power In W-

Device Short NameLC1D

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

LC1D40ABD on Powermatic Associates

LC1D40ABD

Verified stock: 2

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor is rated for currents of 60A (AC-1) and 40A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. It has a net width of 55 mm and offers a degree of protection rated at IP20. The control voltage (DC) ranges from 18-30Vdc, with a nominal 24Vdc, and it operates at a rated voltage (Ue) of up to 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power spans from 11kW at 220-230Vac to 30kW at 660-690Vac in AC-3 category. The rated power in horsepower (HP) varies from 3HP at 115Vac in single-phase to 30HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D40ABD is up to 6,000,000 operations, and its electrical durability with load reaches 1,500,000 operations. The rated voltage for phase-to-phase connections is 690 V.

Schneider Electric

LC1D1156BD on Powermatic Associates

LC1D1156BD

Verified stock: 5

Schneider Electric LC1D1156BD is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for currents of 200A (AC-1) and 115A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and has a net width of 120 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (DC) of 18-28.8Vdc (24Vdc nom.; 0.75...1.2 x Uc). The rated operating voltage (Ue) is up to 1000 V, and it includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. It supports rated active power ranging from 30kW at 220-230Vac to 80kW at 660-690Vac in AC-3 operation mode, and up to 65kW at 1000Vac. The rated power in horsepower (HP) varies from 30HP at 200-208Vac to 100HP at 575-600Vac for 3-phase, 50Hz/60Hz, UL/CSA standards. Its mechanical durability is up to 8,000,000 operations, and electrical durability with load reaches 950,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

LC1D326BD on Powermatic Associates

LC1D326BD

Verified stock: 1

Schneider Electric LC1D326BD is a magnetic contactor from the Deca sub-range, designed with ring-lugs connections and three poles (3P; 3NO). It has a rated current of 50A for AC-1 and 32A for 440Vac in AC-3, with a mounting mode suitable for DIN rail installations. The net width of the contactor is 45 mm, and it offers a degree of protection rated at IP20. The control voltage (DC) ranges from 18-30Vdc, with a nominal 24Vdc, and the rated operating voltage (Ue) is up to 690 V. This contactor includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV, and it supports rated active power ranging from 7.5kW to 18.5kW across various AC-3 voltage levels. The rated power in horsepower (HP) varies from 2HP to 25HP, depending on the voltage and phase, suitable for both single-phase and three-phase applications under UL/CSA standards. The mechanical durability of the LC1D326BD is rated at 15 million operations at no load, and its electrical durability with load is 1.6 million operations. The rated voltage (AC) for phase-to-phase connections is 690 V.

Schneider Electric

LC1D256BD on Powermatic Associates

LC1D256BD

Verified stock: 34

Schneider Electric LC1D256BD is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for currents of 40A (AC-1) and 25A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) of 18-30Vdc (24Vdc nom.; 0.75...1.25 x Uc). The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power ranges from 5.5kW at 220-230Vac to 15kW at 660-690Vac in AC-3 category. The rated power (HP) varies from 2HP at 115Vac to 20HP at 575-600Vac, covering both single-phase and three-phase applications, compliant with UL/CSA standards. The mechanical durability of the LC1D256BD is rated at 15 million operations, and its electrical durability with load is 1.6 million operations. The rated voltage (AC) for phase-to-phase connections is 690 V.

Schneider Electric

LC1DT20BL on Powermatic Associates

LC1DT20BL

Verified stock: 2

Schneider Electric LC1DT20BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W. It features screw connections for secure installation and operates with 4 poles (4NO) capable of handling a rated current of 20A under AC-1 conditions. This contactor is designed for DIN rail mounting, ensuring a compact and efficient setup with a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage range of 19.2-30Vdc, nominally at 24Vdc, which is 0.8 to 1.25 times the control voltage (Uc). The LC1DT20BL can handle a rated operating voltage (Ue) up to 690 V and is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both rated for instantaneous operation. The contacts are designed to withstand a rated impulse voltage (Uimp) of 6 kV. With mechanical durability rated at 15 million operations at no load, this contactor is built for longevity. It supports a phase-to-phase rated voltage (AC) of 690 V and maintains a power consumption of 2.4 W.

Schneider Electric

FAQ

What is the price of LC1DT206BL?
Purchase the LC1DT206BL from Powermatic Associates at the price of $158.00. Order today.

3 in stock

Schneider Electric LC1DT206BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W of power. It features ring-lugs connections and is equipped with 4 poles (4NO) for comprehensive circuit control. This contactor is rated for a current of 20A under AC-1 conditions and can be mounted on a DIN rail for easy installation. With a net width of 45 mm and an IP20 degree of protection, it ensures a compact and secure setup. The control voltage ranges from 19.2 to 30Vdc, with a nominal 24Vdc, allowing for flexible operation within 0.8 to 1.25 times the control voltage (Uc). It includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both designed for instantaneous operation. The LC1DT206BL boasts a mechanical durability of 15 million operations at no load and can handle rated impulse voltages up to 6 kV. It supports a phase-to-phase rated voltage up to 690 V AC, ensuring compatibility with a wide range of electrical systems.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts