Powermatic Associates Logo

LP4K09008EW3 Schneider Electric Industrial Automation Components

LP4K09008EW3 on Powermatic Associates
Schneider Electric

Part#:LP4K09008EW3

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric LP4K09008EW3 is a magnetic contactor within the K sub-range, featuring screw connections and a 4-pole (4P; 2NO+2NC) configuration. It has a rated current of 20A (AC-1) and 110A (Irms AC), with a degree of protection classified as IP20. The control voltage (DC) is specified at 33.6-62.4Vdc (48Vdc nominal; 0.7...1.3 x Uc). This contactor is designed for a rated operating voltage (Ue) of 690 V and does not include normally open (NO) or normally closed (NC) auxiliary contacts. It boasts a mechanical durability of 30,000,000 operations at no load and has a power consumption of 1.8 W. The rated voltage (AC) for phase-to-phase connections is also 690 V.

Product Details

  • Contactor Application
    Resistive load
  • Hold-In Power Consumption In W
    1.8 W 68 °F (20 °C)
  • Pole Contact Composition
    2 NO + 2 NC
  • Overvoltage Category
    III
  • Maximum Operating Rate
    3600 cyc/h
  • Poles Description
    4P
  • Net Weight
    0.52 lb(US) (0.235 kg)
  • Product Or Component Type
    Contactor
  • [Ue] Rated Operational Voltage
    Power circuit 690 V AC 50/60 Hz
  • Average Impedance
    3 mOhm - Ith 20 A 50 Hz power circuit
  • Range
    TeSys
  • Mechanical Durability
    30 Mcycles
  • [Uimp] Rated Impulse Withstand Voltage
    8 kV
  • Height
    2.28 in (58 mm)
  • Depth
    2.24 in (57 mm)
  • Utilisation Category
    AC-1
  • Range Of Product
    TeSys K
  • Coil Technology
    Built-in bidirectional peak limiting diode suppressor
  • [Ith] Conventional Free Air Thermal Current
    20 A 122 °F (50 °C) power circuit
  • Width
    1.77 in (45 mm)
  • Device Short Name
    LP4K
  • Inrush Power In W
    1.8 W 68 °F (20 °C))
  • [Ie] Rated Operational Current
    20 A 122 °F (50 °C)) <= 440 V AC AC-1 power circuit 16 A 158 °F (70 °C)) 690 V AC AC-1 power circuit
  • Control Circuit Voltage Limits
    Operational 0.7...1.30 Uc 122 °F (50 °C)) Drop-out 0.1...0.7 Uc 122 °F (50 °C))
  • Associated Fuse Rating
    25 A gG <= 440 V power circuit 25 A aM power circuit
  • Irms Rated Making Capacity
    110 A AC power circuit NF C 63-110 110 A AC power circuit IEC 60947
  • Tightening Torque
    11.51 lbf.in (1.3 N.m) screw clamp terminals Philips No 2 11.51 lbf.in (1.3 N.m) screw clamp terminals flat Ø 6 mm
  • Mounting Support
    Rail Plate
  • Safety Reliability Level
    B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
  • Flame Retardance
    V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
  • [Ui] Rated Insulation Voltage
    Power circuit 600 V UL 508 Power circuit 690 V IEC 60947-4-1 Power circuit 600 V CSA C22.2 No 14
  • Operating Time
    10...20 ms coil de-energisation and NO opening 30...40 ms coil energisation and NO closing 25...35 ms coil energisation and NC opening 15...25 ms coil de-energisation and NC closing
  • Rated Breaking Capacity
    110 A 415 V IEC 60947 110 A 440 V IEC 60947 80 A 500 V IEC 60947 110 A 220...230 V IEC 60947 110 A 380...400 V IEC 60947 70 A 660...690 V IEC 60947

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LP4K09008EW3 on Powermatic Associates is $121.58. Order now.

LP4K09008EW3 Related Documents

Instruction Sheet-1631038469296.pdfProduct Datasheet-1631038469299.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
NSYTBP16128T on Powermatic Associates

NSYTBP16128T

Schneider Electric

Schneider Electric - NSYTBP16128T

25 in stock
M9F42170 on Powermatic Associates

M9F42170

Schneider Electric

Schneider Electric M9F42170 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed to comply with UL489 standards. It features a single pole configuration and is rated for a current of 0.5A. The MCB is equipped with a rated insulation voltage (Ui) of 500V, a DC rated voltage of 60Vdc, and an impulse voltage (Uimp) rating of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 277Vac and 60Vdc. The AC rated voltage is 240V phase-to-neutral and 415V phase-to-phase, with one protected pole. The tripping curve is classified as type C.

2 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock

Manufacturer warranty

LP4K09008EW3 Schneider Electric

$121.58

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$121.58

$121.58 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LP4K09008EW3 with other Industrial Automation Components products

Contactor Application

Hold-In Power Consumption...

Pole Contact Composition

Overvoltage Category

Maximum Operating Rate

Poles Description

Net Weight

Product Or Component Type

[Ue] Rated Operational Vo...

Average Impedance

Selected product

LP4K09008EW3
Backordered
LP4K09008EW3
Schneider Electric

Schneider Electric LP4K09008EW3 is a magnetic contactor within the K sub-range, featuring screw conn...

Contactor ApplicationResistive load

Hold-In Power Consumption In W1.8 W 68 °F (20 °C)

Pole Contact Composition2 NO + 2 NC

Overvoltage CategoryIII

Maximum Operating Rate3600 cyc/h

Poles Description4P

Net Weight0.52 lb(US) (0.235 kg)

Product Or Component TypeContactor

[Ue] Rated Operational VoltagePower circuit 690 V AC 50/60...

Average Impedance3 mOhm - Ith 20 A 50 Hz powe...

LC1D40ABD
2 in stock
LC1D40ABD
Schneider Electric

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM)...

Contactor ApplicationResistive load Motor control

Hold-In Power Consumption In W-

Pole Contact Composition-

Overvoltage Category-

Maximum Operating Rate-

Poles Description3P

Net Weight-

Product Or Component TypeContactor

[Ue] Rated Operational Voltage-

Average Impedance-

DFCC2
15 in stock
DFCC2
Schneider Electric

Schneider Electric - DFCC2

Contactor Application-

Hold-In Power Consumption In W-

Pole Contact Composition-

Overvoltage Category-

Maximum Operating Rate-

Poles Description2P

Net Weight-

Product Or Component TypeFuse carrier

[Ue] Rated Operational Voltage-

Average Impedance-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

LP4K1210BW3 on Powermatic Associates

LP4K1210BW3

Verified stock: 0

Schneider Electric LP4K1210BW3 is a magnetic contactor within the K sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 20A under AC-1 conditions and 12A at 440Vac under AC-3 conditions. This contactor is equipped with a degree of protection IP20 and operates with a control voltage (DC) range of 16.8-31.2Vdc, nominally at 24Vdc. The rated operating voltage (Ue) is up to 690 V, and it includes 1 Normally Open (NO) auxiliary contact. The rated active power varies with voltage, offering 3kW at 220-230Vac, 5.5kW at both 380-415Vac and 440Vac, 4kW at 500Vac, and 4kW at 660-690Vac, all under AC-3 conditions. It has no Normally Closed (NC) auxiliary contacts. The mechanical durability of this contactor is rated at 30 million operations at no load, and it has a power consumption of 1.8 W.

Schneider Electric

LP4K0901BW3 on Powermatic Associates

LP4K0901BW3

Verified stock: 0

Schneider Electric LP4K0901BW3 is a magnetic contactor within the K sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 20A under AC-1 conditions and 9A at 440Vac under AC-3 conditions. This contactor is equipped with a degree of protection IP20 and operates with a control voltage (DC) range of 16.8-31.2Vdc, nominally at 24Vdc. The rated operating voltage (Ue) is up to 690 V, and it does not have Normally Open (NO) auxiliary contacts but includes 1 Normally Closed (NC) auxiliary contact. The rated active power varies with voltage, reaching up to 4kW across 220-690Vac under AC-3 conditions. Its mechanical durability is rated at 30 million operations at no load, with a power consumption of 1.8 W and a phase-to-phase rated voltage (AC) of 690 V.

Schneider Electric

LP4K0601BW3 on Powermatic Associates

LP4K0601BW3

Verified stock: 0

Schneider Electric LP4K0601BW3 is a magnetic contactor from the K sub-range, designed with screw connections and equipped with 3 poles (3P; 3NO). It has a rated current of 6A at 440Vac under AC-3 utilization category and offers a degree of protection of IP20. The control voltage (DC) ranges from 16.8-31.2Vdc, with a nominal value of 24Vdc. This contactor supports a rated operating voltage (Ue) of up to 690 V and does not include normally open (NO) auxiliary contacts but comes with 1 normally closed (NC) auxiliary contact. It is capable of handling rated active power of 1.5kW at 220-230Vac, 2.2kW at 380-415Vac, and 3kW at 440Vac, 500Vac, and 660-690Vac, all under AC-3 conditions. The mechanical durability of this contactor is rated at 30 million operations at no load, with a power consumption of 1.8 W.

Schneider Electric

FAQ

What is the price of LP4K09008EW3?
Purchase the LP4K09008EW3 from Powermatic Associates at the price of $121.58. Order today.

Out if stock but available for backorder.

Schneider Electric LP4K09008EW3 is a magnetic contactor within the K sub-range, featuring screw connections and a 4-pole (4P; 2NO+2NC) configuration. It has a rated current of 20A (AC-1) and 110A (Irms AC), with a degree of protection classified as IP20. The control voltage (DC) is specified at 33.6-62.4Vdc (48Vdc nominal; 0.7...1.3 x Uc). This contactor is designed for a rated operating voltage (Ue) of 690 V and does not include normally open (NO) or normally closed (NC) auxiliary contacts. It boasts a mechanical durability of 30,000,000 operations at no load and has a power consumption of 1.8 W. The rated voltage (AC) for phase-to-phase connections is also 690 V.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock