Powermatic Associates Logo

RE22R2ACMR Schneider Electric Industrial Automation Components

RE22R2ACMR on Powermatic Associates
Schneider Electric

Part#:RE22R2ACMR

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric RE22R2ACMR is an analog timer designed for modular installation on a DIN rail, featuring a single function with both ON-delay and OFF-delay timing capabilities controlled via a rotary knob and a diagnostic button. It supports a control signal pulse width of 100ms with a load in parallel and 30ms without, and a recovery time of 120ms upon de-energisation, with a power-on delay of 100ms. This timer is rated for 8 A current and falls under the RE22 sub-range. It offers a degree of protection of IP40 for the housing, IP20 for terminals, and IP50 for the front face. The housing material is self-extinguishing, ensuring durability. Power consumption is rated at 1.5 W at 240Vdc. It features DPDT (Double Pole Double Throw) contacts, with a rated impulse voltage of 5 kV. The supply voltage ranges from 24-240 V AC/DC, with a minimum of 20.4 V. Display indicators include a green LED backlight for dial pointer indication, and yellow LEDs for various timing and relay status indications. Its electrical durability spans 100,000 operations at 250vac/24Vdc and up to 10,000,000 operations. The time delay range is extensive, from 1 second to 300 hours. It operates within a temperature range of -20°C to +60°C.

Product Details

  • Time Delay Type
    On-delay and off-delay
  • Voltage Drift
    +/- 0.2 %/V
  • Immunity To Microbreaks
    10 ms
  • Product Or Component Type
    Single function relay
  • Supply Frequency
    50...60 Hz +/- 5 %
  • Range Of Product
    Harmony Timer Relays
  • Nominal Output Current
    8 A
  • Setting Accuracy Of Time Delay
    +/- 10 % of full scale 25 °C IEC 61812-1
  • Recovery Time
    120 ms on de-energisation
  • Tightening Torque
    5.31…8.85 lbf.in (0.6…1 N.m) IEC 60947-1
  • Housing Material
    Self-extinguishing
  • Device Short Name
    RE22
  • [Us] Rated Supply Voltage
    24...240 V AC/DC 50/60 Hz
  • Release Input Voltage
    <= 2.4 V
  • Minimum Switching Current
    10 mA 5 V DC
  • Power On Delay
    100 ms
  • Discrete Output Type
    Relay
  • Voltage Range
    0.85...1.1 Us
  • Mechanical Durability
    10000000 cycles
  • Net Weight
    0.23 lb(US) (0.105 kg)
  • Temperature Drift
    +/- 0.05 %/°C
  • Insulation Resistance
    100 MOhm 500 V DC IEC 60664-1
  • Rated Impulse Withstand Voltage
    5 kV 1.2…50 µs IEC 60664-1
  • Repeat Accuracy
    +/- 0.5 % IEC 61812-1
  • Switching Capacity In VA
    2000 VA
  • Mounting Support
    35 mm DIN rail conforming to EN/IEC 60715
  • Power Consumption In W
    1.5 W 240 V DC
  • Creepage Distance
    4 kV/3 IEC 60664-1
  • Power Consumption In VA
    3 VA 240 V AC
  • Width
    0.89 in (22.5 mm)
  • Overvoltage Category
    III IEC 60664-1
  • Maximum Switching Voltage
    250 V AC
  • Mounting Position
    Any position
  • Maximum Switching Current
    8 A
  • Control Type
    Rotary knob Diagnostic button
  • Contacts Type And Composition
    1 C/O timed contact, cadmium free 1 C/O timed or instantaneous contact, cadmium free
  • Control Signal Pulse Width
    100 ms with load in parallel 30 ms
  • Safety Reliability Data
    MTTFd = 251.1 years B10d = 230000
  • Electrical Durability
    100000 cycles, 8 A at 250 V, AC-1 100000 cycles, 2 A at 24 V, DC-1
  • Connections - Terminals
    Screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end Screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end Screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 14) flexible with cable end
  • Status LED
    Green LED backlight steady)dial pointer indication Yellow LED steady)output relay energised Yellow LED fast flashing)timing in progress and output relay de-energised Yellow LED slow flashing)timing in progress and output relay energised
  • Time Delay Range
    3...30 h 30...300 h 0.05...1 s 30...300 s 0.3...3 s 10...100 s 1...10 s 3...30 min 30...300 min 3...30 s

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of RE22R2ACMR on Powermatic Associates is $72.10. Order now.

RE22R2ACMR Related Documents

Instruction Sheet-1631031211404.pdfCatalog-1631031211400.pdfProduct Datasheet-1631031211403.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
MGN61508 on Powermatic Associates

MGN61508

Schneider Electric

Schneider Electric MGN61508 is a Miniature Circuit Breaker (MCB) designed for DC applications. It falls under the C60H-DC sub-range and features a rated current of 10A with a rated voltage of 250V DC. This MCB is equipped with 1 pole that is protected and utilizes a C tripping curve.

32 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock
TRV00810 on Powermatic Associates

TRV00810

Schneider Electric

Schneider Electric TRV00810 is a cable designed as part of the communication accessories sub-range, featuring a network cord with 2x male RJ45 connectors. It has a length of 1m.

90 in stock

Manufacturer warranty

RE22R2ACMR Schneider Electric

$72.10

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$72.10

$72.10 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare RE22R2ACMR with other Industrial Automation Components products

Time Delay Type

Voltage Drift

Immunity To Microbreaks

Product Or Component Type

Supply Frequency

Range Of Product

Nominal Output Current

Setting Accuracy Of Time ...

Recovery Time

Tightening Torque

Selected product

RE22R2ACMR
Backordered
RE22R2ACMR
Schneider Electric

Schneider Electric RE22R2ACMR is an analog timer designed for modular installation on a DIN rail, fe...

Time Delay TypeOn-delay and off-delay

Voltage Drift+/- 0.2 %/V

Immunity To Microbreaks10 ms

Product Or Component TypeSingle function relay

Supply Frequency50...60 Hz +/- 5 %

Range Of ProductHarmony Timer Relays

Nominal Output Current8 A

Setting Accuracy Of Time Delay+/- 10 % of full scale 25 °C...

Recovery Time120 ms on de-energisation

Tightening Torque5.31…8.85 lbf.in (0.6…1 N.m)...

XB5AA65
4 in stock
XB5AA65
Schneider Electric

Schneider Electric XB5AA65 is a flush push-button designed for various control applications. This co...

Time Delay Type-

Voltage Drift-

Immunity To Microbreaks-

Product Or Component TypePush-button

Supply Frequency-

Range Of ProductHarmony XB5

Nominal Output Current-

Setting Accuracy Of Time Delay-

Recovery Time-

Tightening Torque-

M9F53220
1 in stock
M9F53220
Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, design...

Time Delay Type-

Voltage Drift-

Immunity To Microbreaks-

Product Or Component TypeMiniature circuit-breaker

Supply Frequency-

Range Of Product-

Nominal Output Current-

Setting Accuracy Of Time Delay-

Recovery Time-

Tightening Torque-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

LGF36600U31XAAUOYH1 on Powermatic Associates

LGF36600U31XAAUOYH1

Schneider Electric

Square D by Schneider Electric LGF36600U31XAAUOYH1 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGF sub-range. It features a factory-installed 24Vdc undervoltage (U/V) trip release coil and a factory-installed 1A/1B (1NO+1NC) auxiliary switch OF wire harness. Designed for PowerPacT L-Frame 600 Micrologic 3.3 (LI), this 3-pole (3P) circuit breaker is rated for 600A and 600Vac, with a busbar rating of 80% and an 18kA busbar. It offers long-time (L) and instantaneous (I) protection functions, with a rated insulation voltage (Ui) of 750 V and a rated voltage (AC) of 600Vac 600Y/347Vac. The unit is designed for individual unit mount on plate, with a net height of 382 mm, width of 153 mm, and depth of 171 mm. It has an IP40 degree of protection and operates manually via a toggle. Protection settings include L - Protection against overload adjustable from 0.3 to 1 x In (50A to 150A) and I - Instantaneous protection against short-circuit adjustable from 1.5 to 11 x In (900A to 6600A). The control voltage (AC) specification indicates that the circuit breaker opens instantaneously when the undervoltage trip supply voltage drops between 35% and 70% of its rated control voltage, allowing closing when the supply voltage reaches 85% of rated control voltage. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 600 AT, with a frame current rating of 600 AF. It has a short circuit breaking rating of 65kA at 240Vac, 35kA at 480Vac, 35kA at 480Y/277Vac, 18kA at 600Vac, 18kA at 600Y/347Vac, and 20kA at 500Vdc, all according to UL489 standards. The trip unit type is an electronic Micrologic Standard 3.3 (LI) with LI protection and no display, categorized under utilisation category A.

5 in stock

Relevant products

RE22R1MLMR on Powermatic Associates

RE22R1MLMR

Verified stock: 0

Schneider Electric RE22R1MLMR is an analog, modular multi-function timer designed for DIN rail mounting. It features a variety of functions including L, Li, Lt, Lit, controlled via a rotary knob, a diagnostic button, and an external potentiometer. The timer offers a control signal pulse width of 100ms with a load in parallel and 30ms without, a recovery time of 120ms on de-energisation, and a power-on delay of 100ms. It has a rated current of 8 A and falls under the RE22 sub-range. The degree of protection provided includes IP40 for the housing, IP20 for the terminals, and IP50 for the front face. The housing material is self-extinguishing, ensuring durability. Power consumption at 240Vdc is 1.5 W. The timer features SPDT (Single Pole Double Throw) - 1C/O contacts, with a rated impulse voltage of 5 kV. It supports a supply voltage of 24-240 V AC/DC, with a minimum of 20.4 V. The display includes a green LED backlight for dial pointer indication, and yellow LEDs for various status indications such as output relay energised/de-energised and timing progress. It offers electrical durability of 100,000 operations at 250Vac/24Vdc with a resistive load and up to 10,000,000 operations. The time delay range is 1s to 300h (1 to 1,080,000 s), and it operates within a temperature range of -20°C to +60°C.

Schneider Electric

RE22R2MJU on Powermatic Associates

RE22R2MJU

Verified stock: 0

Schneider Electric RE22R2MJU is an analog timer featuring a modular design of 18mm / 1module with multiple functions including A, Ac, At, B, Bw, C, D, Di, H, Ht. It is controlled via a front panel rotary knob, with a control signal pulse width of 100ms under load and 30ms, and a recovery time of 120ms on de-energisation. The power-on delay is set at 100ms. Designed for DIN rail mounting, this timer has a rated current of 8 A and falls under the RE22 sub-range. It offers a degree of protection of IP40 for both the front face and housing, and IP20 for the terminal block. The housing is made from self-extinguishing material. With a power consumption of 5 W at 12Vdc, it features DPDT (Double Pole Double Throw) - 2C/O contacts type, a rated impulse voltage of 5 kV, and a supply voltage range of 12 V (Minimum 10.8 V). The display includes a green LED for timing in progress and power ON indication, along with a yellow LED for relay energisation. Its electrical durability is rated at 100,000 operations for 250Vac resistive load and 10,000,000 operations. The time delay range is from 0.1s to 100h (0.1 to 360,000 s), and it operates within a temperature range of -20°C to +60°C.

Schneider Electric

RE22R1QMQ on Powermatic Associates

RE22R1QMQ

Verified stock: 0

Schneider Electric RE22R1QMQ is an analog timer designed for modular installation on a DIN rail, featuring a single function Star-delta timer with two normally open outputs sharing the same common. It is controlled via a front panel rotary knob, with a control signal pulse width of 100ms under load and 30ms, and a recovery time of 120ms upon de-energization. The timer has a power-on delay of 100ms, operates with a rated current of 8 A, and falls under the RE22 sub-range. It offers a degree of protection of IP40 for both the front face and housing, and IP20 for the terminal block, with a self-extinguishing housing material. Power consumption is rated at 8 VA for 240Vac and 17 VA for 380-440Vac. The RE22R1QMQ features SPDT contacts, a rated impulse voltage of 5 kV, and a supply voltage range of 230-440 V AC, with a minimum of 20.4 V. It includes a green LED display indicating timing progress or power status, and a yellow LED for relay activation. Its electrical durability is rated for 100,000 operations at 250Vac with a resistive load, and up to 10,000,000 operations. The timer offers a wide time delay range from 1 second to 300 hours, and operates within a temperature range of -20°C to +60°C.

Schneider Electric

RE22R2MXMU on Powermatic Associates

RE22R2MXMU

Verified stock: 0

Schneider Electric RE22R2MXMU is an analog timer featuring a modular design of 18mm / 1module and offers multiple functions including Ad, Ah, N, O, P, Pt, Tl, Tt, and W. It is controlled via a front panel rotary knob with a control signal pulse width of 100ms under load and 30ms, alongside a recovery time of 120ms on de-energisation and a power-on delay of 100ms. Designed for DIN rail mounting, this timer has a rated current of 8 A and falls under the RE22 sub-range. It offers a degree of protection of IP40 for the housing, IP20 for the terminal block, and IP50 for the front face. The housing is made from self-extinguishing material. With a power consumption of 0.7 W at 24Vdc, it features DPDT (Double Pole Double Throw) - 2C/O contacts type, a rated impulse voltage of 5 kV, and a supply voltage range of 24-240 V AC and 24 V DC (Minimum 20.4 V). The display includes a green LED for timing in progress and power ON indication, and a yellow LED for relay energisation. It has 2 NC (Normally Closed) circuits, offers electrical durability of 100,000 operations at 250Vac with a resistive load and up to 10,000,000 operations. The time delay range is 0.1s - 100h / 0.1 - 360,000 s, and it operates within a temperature range of -20°C to +60°C.

Schneider Electric

RE22R2MYMR on Powermatic Associates

RE22R2MYMR

Verified stock: 0

Schneider Electric RE22R2MYMR is an analog timer featuring a modular design of 18mm / 1module and offers a wide range of functions including A, At, Aw, C, D, Di, H, Ht, Qg, Qt, W, Ct, Dw, Hw, Wt, Dt, Dit, Diw, Qgt, Qtt, Qgw, Qtw. It is controlled via a rotary knob, a diagnostic button, and an external potentiometer. The control signal pulse width is 100ms with a load in parallel and 30ms without, with a recovery time of 120ms upon de-energisation and a power-on delay of 100ms. Designed for DIN rail mounting, it has a rated current of 8 A and falls under the RE22 sub-range. The degree of protection is IP40 for the housing, IP20 for the terminals, and IP50 for the front panel, with the housing material being self-extinguishing. Power consumption at 240Vdc is 1.5 W, and it features DPDT (Double Pole Double Throw) - 2C/O contacts. The rated impulse voltage (Uimp) is 5 kV, and it operates on a supply voltage of 24-240 V AC/DC, with a minimum of 20.4 V. The display includes a green LED backlight for dial pointer indication, and yellow LEDs for various timing and relay status indications. Its electrical durability is rated at 100,000 operations at 250vac/24Vdc and 10,000,000 operations. The time delay range is 1s - 300h / 1 - 1,080,000 s, with an operational temperature range of -20°C to +60°C.

Schneider Electric

FAQ

What is the price of RE22R2ACMR?
Purchase the RE22R2ACMR from Powermatic Associates at the price of $72.10. Order today.

Out if stock but available for backorder.

Schneider Electric RE22R2ACMR is an analog timer designed for modular installation on a DIN rail, featuring a single function with both ON-delay and OFF-delay timing capabilities controlled via a rotary knob and a diagnostic button. It supports a control signal pulse width of 100ms with a load in parallel and 30ms without, and a recovery time of 120ms upon de-energisation, with a power-on delay of 100ms. This timer is rated for 8 A current and falls under the RE22 sub-range. It offers a degree of protection of IP40 for the housing, IP20 for terminals, and IP50 for the front face. The housing material is self-extinguishing, ensuring durability. Power consumption is rated at 1.5 W at 240Vdc. It features DPDT (Double Pole Double Throw) contacts, with a rated impulse voltage of 5 kV. The supply voltage ranges from 24-240 V AC/DC, with a minimum of 20.4 V. Display indicators include a green LED backlight for dial pointer indication, and yellow LEDs for various timing and relay status indications. Its electrical durability spans 100,000 operations at 250vac/24Vdc and up to 10,000,000 operations. The time delay range is extensive, from 1 second to 300 hours. It operates within a temperature range of -20°C to +60°C.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts