Powermatic Associates Logo

TCSESM163F2CS0 Schneider Electric Electronic Components

TCSESM163F2CS0 on Powermatic Associates
Schneider Electric

Part#:TCSESM163F2CS0

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

FR catalog.xlsx - SM-618

Product Details

  • Concept
    Transparent Ready
  • Width
    4.37 in (111 mm)
  • Attenuation
    0…16 dB 9/125 µm)
  • Ethernet Cabling System
    TF switches
  • Range Of Product
    ConneXium
  • Optic Fiber Length
    20.19 mile (32.5 km) 9/125 µm
  • Electrical Connection
    Removable connector 6 ways power supply
  • Net Weight
    1.32 lb(US) (0.6 kg)
  • Maximum Number Of Switches In A Ring
    50
  • Product Or Component Type
    Ethernet TCP/IP managed switch
  • Maximum Cable Distance Between Devices
    328.08 ft (100 m) copper cable
  • Height
    5.16 in (131 mm)
  • Maximum Number Of Switches In Cascade
    Unlimited
  • Mounting Support
    35 mm symmetrical DIN rail
  • Depth
    4.37 in (111 mm)
  • Cybersecurity
    Port hardening
  • [Us] Rated Supply Voltage
    12...48 V
  • Alarm Output
    1 voltfree contact 1 A
  • Power Consumption In W
    11.8 W
  • Supply Voltage Limits
    9.6…60 V DC SELV 18…30 V AC SELV
  • Transmission Support Medium
    Single mode optical fiber copper cable Twisted shielded pairs cable CAT 5E fiber optic
  • Integrated Connection Type
    Duplex SC fiber optic Shielded RJ45 copper cable
  • Port Ethernet
    100BASE-FX - 2 fiber optic 10/100BASE-TX - 14 copper cable
  • Diagnostics Run Time
    Signal contact Self test
  • Redundancy
    HiPER ring RSTP Redundant network coupling
  • Function Available
    Alarms (Traps) System information Report Trap log
  • Ethernet Service
    Configuration via web server VLAN Multicast filtering Data stream control IGMP Snooping SNMP-Traps and SYSLOG
  • Alarm Function
    Power supply fault Data link status Redundancy ring fault Switch fault
  • Marking
    CE UL RCM EtherNet/IP
  • Communication Service
    TFTP Quality of Service (QoS) Port monitoring Port mirroring Address conflict detection
  • Local Signalling
    for P1 P2 power supplies 1 dual colour LED (green/yellow) for fault 1 LED (red) for ring manager 1 dual colour LED (green/yellow) for stand-by 1 LED (green) for link status 1 LED per channel (green) for ACT 1 LED per channel
  • Communication Port Protocol
    Ethernet TCP/IP SSH HTTP HTTPS SNMP RS232 LLDP Telnet SNTP MRP (Media Redundancy Protocol)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

TCSESM163F2CS0 Related Documents

Catalog-1631028795924.pdfProduct Datasheet-1631028795960.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

0 in stock
M9U31110 on Powermatic Associates

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

1 in stock
BJF36035 on Powermatic Associates

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BJF sub-range. It features a PowerPact B-Frame 100 TMD 3P-3t design, with a rated current of 35A and a rated voltage of 600Vac 600Y/347Vac. The breaker is designed for a fixed busbar connection with a term. nut kit on both line and load sides, offering a degree of protection of IP40. It has a mechanical durability of 15,000 operations and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) device has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It operates within Utilisation category A and has protection settings for over-current fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated impulse voltage (Uimp) is 8 kV, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 690 V. It provides thermal and magnetic protection functions, with a trip current rating of 35 AT and an electrical durability of 10,000 operations at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mode. The short circuit breaking rating varies by voltage, with 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Y/347Vac, and 50kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

7 in stock
QOB315EPD5237 on Powermatic Associates

QOB315EPD5237

Schneider Electric

Square D by Schneider Electric QOB315EPD5237 is a Miniature Circuit Breaker (MCB) designed with Equipment Protection Device (EPD) functionality, offering ground fault protection. This bolt-on mounted MCB operates with a rated current of 15A and a connection type that also utilizes a bolt-on mechanism. It is designed for use with a rated voltage (AC) of 240 V and can accommodate a wire cross-section of 14-8AWG (1 cable Cu). The QOB315EPD5237 features 3 poles and has a residual current sensitivity of 30mA / 0.03. Its protection functions include ground fault protection, and it has a short circuit breaking rating of 10kA at 240Vac. The type of terminals used in this MCB is ring tongue.

1 in stock

Manufacturer warranty

TCSESM163F2CS0 Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare TCSESM163F2CS0 with other Electronic Components products

Concept

Width

Attenuation

Ethernet Cabling System

Range Of Product

Optic Fiber Length

Electrical Connection

Net Weight

Maximum Number Of Switche...

Product Or Component Type

Selected product

TCSESM163F2CS0
Backordered
TCSESM163F2CS0
Schneider Electric

FR catalog.xlsx - SM-618

ConceptTransparent Ready

Width4.37 in (111 mm)

Attenuation0…16 dB 9/125 µm)

Ethernet Cabling SystemTF switches

Range Of ProductConneXium

Optic Fiber Length20.19 mile (32.5 km) 9/125 µ...

Electrical ConnectionRemovable connector 6 ways p...

Net Weight1.32 lb(US) (0.6 kg)

Maximum Number Of Switches In A Ring50

Product Or Component TypeEthernet TCP/IP managed swit...

LC1F225L7
1 in stock
LC1F225L7
Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for...

Concept-

Width-

Attenuation-

Ethernet Cabling System-

Range Of Product-

Optic Fiber Length-

Electrical Connection-

Net Weight-

Maximum Number Of Switches In A Ring-

Product Or Component TypeContactor

M9U31110
1 in stock
M9U31110
Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads,...

Concept-

Width-

Attenuation-

Ethernet Cabling System-

Range Of Product-

Optic Fiber Length-

Electrical Connection-

Net Weight-

Maximum Number Of Switches In A Ring-

Product Or Component TypeMiniature circuit-breaker

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

TCSESB083F23F0 on Powermatic Associates

TCSESB083F23F0

Verified stock: 0

Schneider Electric TCSESB083F23F0 is an Ethernet Switch designed for basic managed Ethernet services. It features configuration capabilities via a web server, multicast filtering, data stream control, IGMP Snooping, SNMP-Traps, and SYSLOG. The switch supports various communication services including TFTP, Quality of Service (QoS), port monitoring, and port mirroring. It operates on Ethernet TCP/IP, HTTP, HTTPS, SNMP, RS232, LLDP, SNTP, and MRP (Media Redundancy Protocol) communication port protocols. This model comes with 8 RJ45 connectors supporting 10BASE-T/100BASE-TX, requires a supply voltage of 19-30Vdc (24Vdc nominal), and is designed for DIN rail (35mm) mounting. It operates within an ambient air temperature range of +32...+140°F / 0...+60°C, offers a degree of protection of IP20, and is compatible with the Ethernet/IP communication protocol. The switch has a connection capacity of 8 Ethernet ports, a power consumption of 6 W, and can operate in humidity levels of 10-95% without condensation.

Schneider Electric

TCSESM083F23F1 on Powermatic Associates

TCSESM083F23F1

Verified stock: 0

Schneider Electric TCSESM083F23F1 is an Ethernet Switch designed for extended managed Ethernet services. It features configuration capabilities via a web server, VLAN support, multicast filtering, data stream control, IGMP Snooping, and communication services including SNMP-Traps and SYSLOG. It supports TFTP, Quality of Service (QoS), port monitoring, port mirroring, and address conflict detection. The communication port protocols include Ethernet TCP/IP, SSH, HTTP, HTTPS, SNMP, RS232, LLDP, Telnet, SNTP, and MRP (Media Redundancy Protocol). This switch offers 8 RJ45 connectors for 10BASE-T/100BASE-TX connections and operates on a supply voltage of 18-62Vdc, with a nominal range of 24-48Vdc. It is designed for DIN rail (35mm) mounting and can operate in ambient air temperatures ranging from +32 to +140°F (0 to +60°C). The TCSESM083F23F1 has an IP30 degree of protection, supports the Ethernet/IP communication protocol, and can accommodate 8 Ethernet ports. It is designed to operate in environments with humidity levels of 10-95% without condensation.

Schneider Electric

TCSESM163F2CU0 on Powermatic Associates

TCSESM163F2CU0

Verified stock: 0

Schneider Electric TCSESM163F2CU0 is an Ethernet managed switch designed for various Ethernet services. It supports configuration via a web server, VLAN, multicast filtering, data stream control, IGMP Snooping, and offers SNMP-Traps and SYSLOG communication services. Additional features include TFTP, Quality of Service (QoS), port monitoring, port mirroring, and address conflict detection. The communication port protocol encompasses Ethernet TCP/IP, SSH, HTTP, HTTPS, SNMP, RS232, LLDP, Telnet, SNTP, and MRP (Media Redundancy Protocol). It is equipped with 14 RJ45 connectors for 10BASE-T/100BASE-TX and 2 duplex SC connectors for 100BASE-FX, supporting 4km/5km rated multimode optical fiber. The switch operates on a supply voltage of 18-62Vdc (24-48Vdc nom.) and can be mounted on a DIN rail (35mm). It is designed to operate in ambient air temperatures ranging from +32 to +140°F (0 to +60°C) and has an IP20 degree of protection. The communication protocol supported is Ethernet/IP, and it has a connection capacity of 16 Ethernet ports. The device can operate in humidity levels of 10-95% without condensation.

Schneider Electric

TCSESM243F2CU0 on Powermatic Associates

TCSESM243F2CU0

Verified stock: 0

Schneider Electric TCSESM243F2CU0 is an Ethernet Switch designed for various Ethernet services including configuration via web server, VLAN, multicast filtering, data stream control, IGMP Snooping, SNMP-Traps, and SYSLOG communication service. It supports TFTP, Quality of Service (QoS), port monitoring, port mirroring, and address conflict detection. The communication port protocol encompasses Ethernet TCP/IP, SSH, HTTP, HTTPS, SNMP, RS232, LLDP, Telnet, SNTP, and MRP (Media Redundancy Protocol). This switch features 22 RJ45 connectors for 10BASE-T/100BASE-TX and 2 duplex SC connectors for 100BASE-FX with a 4km/5km rated multimode optical fiber. It operates on a supply voltage of 18-62Vdc (24-48Vdc nom.) and can be mounted on a DIN rail (35mm). The operating ambient air temperature range is +32...+140°F / 0...+60°C, and it has an IP20 degree of protection. The communication protocol supported is Ethernet/IP, and it has a connection capacity of 24 Ethernet ports. The device is designed to operate in environments with humidity levels of 10-95% without condensation.

Schneider Electric

TCSESM163F23F0 on Powermatic Associates

TCSESM163F23F0

Verified stock: 0

Schneider Electric TCSESM163F23F0 is an Ethernet managed switch designed for various Ethernet services. It supports configuration via a web server, VLAN, multicast filtering, data stream control, IGMP Snooping, SNMP-Traps, and SYSLOG communication service. Additional features include TFTP, Quality of Service (QoS), port monitoring, port mirroring, and address conflict detection. The communication port protocol encompasses Ethernet TCP/IP, SSH, HTTP, HTTPS, SNMP, RS232, LLDP, Telnet, SNTP, and MRP (Media Redundancy Protocol). This switch offers 16 RJ45 connectors for 10BASE-T/100BASE-TX connections and operates on a supply voltage of 18-62Vdc, with a nominal range of 24-48Vdc. It is designed for DIN rail (35mm) mounting and can operate in ambient air temperatures ranging from +32 to +140°F (0 to +60°C). The TCSESM163F23F0 features an IP20 degree of protection, supports the Ethernet/IP communication protocol, and can accommodate 16 Ethernet ports. It is designed to operate in environments with humidity levels of 10-95% without condensation.

Schneider Electric

FAQ

Out if stock but available for backorder.

FR catalog.xlsx - SM-618

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock