X20DOF322 B&R Electronic Components

Product Details

• Diagnostic status
  Output monitoring with 10 ms delay
• Power consumption Internal I/O
  0.95 W
• Certifications KR
  Yes
• Temperature Storage
  -40 to 85°C
• Switching voltage
  24 VDC -15% / +20%
• Status indicators
  I/O function per channel, operating state, module status
• RDS(on)
  140 mΩ
• Diagnostics Module run/error
  Yes, using LED status indicator and software
• Certifications LR
  ENV1
• Temperature Derating
  See section "Derating".
• Nominal voltage
  24 VDC
• Output circuit
  Source
• Insulation voltage between channel and bus
  500 Veff
• Certifications HazLoc
  cCSAus 244665; Process control equipment; for hazardous locations; Class I, Division 2, Groups ABCD, T5
• Certifications ABS
  Yes
• Temperature Transport
  -40 to 85°C
• Temperature Operation Vertical mounting orientation
  -25 to 50°C
• Peak short-circuit current
  <3 A
• Note
  Order 1x terminal block X20TB1F separately.; Order 1x bus module X20BM11 separately.
• Certifications UL
  cULus E115267; Industrial control equipment
Certifications EAC
Yes
Switching delay 0 → 1
<300 µs
Temperature Operation Horizontal mounting orientation
-25 to 60°C
Variant
Current-sourcing FET
Switch-on in the event of overload shutdown or short-circuit shutdown
Approx. 10 ms (depends on the module temperature)
Diagnostics Outputs
Yes, using LED status indicator and software (output error status)
Switching frequency Inductive load
See section "Switching inductive loads".
Relative humidity Operation
5 to 95%, non-condensing
Additional power dissipation caused by actuators (resistive) [W]
+0.56 W
Braking voltage when switching off inductive loads
Typ. 45 VDC
Certifications CE
Yes
Switching delay 1 → 0
<300 µs
Certifications KC
Yes
Nominal output current
0.5 A
I/O module
16 digital outputs 24 VDC for 1-wire connections
Output protection
Thermal shutdown in the event of overcurrent or short circuit (see value "Short-circuit peak current"); Internal freewheeling diode for switching inductive loads (see section "Switching inductive loads")
Power consumption Bus
0.28 W
Mounting orientation Horizontal
Yes
Switching frequency Resistive load
Max. 500 Hz
B&R ID code
0xC0EA
Degree of protection per EN 60529
IP20
Certifications UKCA
Yes
Mounting orientation Vertical
Yes
Relative humidity Transport
5 to 95%, non-condensing
Connection type
1-wire connections
Electrical isolation
Channel isolated from bus; Channel not isolated from channel and I/O power supply
Certifications ATEX
Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
Installation elevation above sea level 0 to 2000 m
No limitation
Relative humidity Storage
5 to 95%, non-condensing
Leakage current when the output is switched off
5 µA
Pitch
12.5+0.2 mm
Certifications DNV
Temperature: B (0 - 55°C); Humidity: B (up to 100%); Vibration: B (4 g); EMC: B (bridge and open deck)
Installation elevation above sea level >2000 m
Reduction of ambient temperature by 0.5°C per 100 m
Total nominal current
8 A

X20DOF322 Related Documents