X20CP1686X B&R Electronic Components

Product Details

• Weight
  480 g
• Cooling
  Fanless
• Permissible contact load
  10 A
• Degree of protection per EN 60529
  IP20
• Input current
  Max. 1.5 A
• CompactFlash slot
  1
• Application memory Error-correcting code (ECC)
  Yes
• Interface IF3 Fieldbus
  POWERLINK (V2) managing or controlled node
• Interface IF5 Type
  USB 1.1/2.0
• Dimensions Height
  99 mm
• Interface IF3 Transfer Half-duplex
  Yes
• Power consumption for X2X Link power supply
  1.42 W
• Fuse
  Integrated, cannot be replaced
• Shortest task class cycle time
  100 µs
• Diagnostics POWERLINK
  Yes, using LED status indicator
• Certifications UL
  cULus E115267; Industrial control equipment
• Data buffering Lithium battery
  During operation: 4 years; PLC switched off: Min. 2 years at 23°C ambient temperature
• Power consumption without interface module and USB
  7.5 W
• Parallel connection
  Yes
• Remanent variables
  Max. 1 MB
Support ACOPOS support
Yes
Processor Clock frequency
1.3 GHz
Application memory Guaranteed erase/write cycles
20,000
Interface IF4 Type
USB 1.1/2.0
Installation elevation above sea level 0 to 2000 m
No limitation
Relative humidity Operation
5 to 95%, non-condensing
Interface IF2 Transfer Half-duplex
Yes
Temperature Operation Vertical mounting orientation
-25 to 50°C
Input voltage
24 VDC -15% / +20%
Reverse polarity protection
Yes
Modular interface slots
1
Note
Order application memory (CompactFlash) separately ; Backup battery included in delivery ; X20 end cover plate (right) included in delivery ; 12-pin X20 terminal block included in delivery ; Interface module slot covers included in delivery
Diagnostics CompactFlash
Yes, using LED status indicator
Diagnostics Temperature
Yes, using software register
Certifications CE
Yes
Diagnostics Overload
Yes, using LED status indicator and software
Processor L2 cache
1 MB
Application memory Data retention
10 years
Interface IF1 Signal
RS232
Interface IF2 Transfer rate
10/100/1000 Mbit/s
Interface IF3 Line length
Max. 100 m between 2 stations (segment length)
Interface IF6 Fieldbus
X2X Link / X2X+ master
Mounting orientation Horizontal
Yes
Relative humidity Storage
5 to 95%, non-condensing
Relative humidity Transport
5 to 95%, non-condensing
Interface IF3 Transfer Autonegotiation
Yes
Interface IF2 Transfer Full-duplex
Yes
Status indicators
CPU function, Ethernet, POWERLINK, CompactFlash, battery
Nominal output power
7 W
Typical instruction cycle time
0.0015 µs
Diagnostics Ethernet
Yes, using LED status indicator
Certifications UKCA
Yes
Electrical isolation I/O supply - I/O power supply
No
Data buffering Battery monitoring
Yes
Interface IF1 Transfer rate
Max. 115.2 kbit/s
Interface IF1 Max. distance
900 m
Interface IF3 Variant
1x RJ45 shielded
Interface IF3 Transfer rate
100 Mbit/s
Mounting orientation Vertical
Yes
Installation elevation above sea level >2000 m
Reduction of ambient temperature by 0.5°C per 100 m
Dimensions Width
150 mm
Dimensions Depth
85 mm
Interface IF2 Transfer Autonegotiation
Yes
Interface IF2 Transfer Auto-MDI/MDIX
Yes
B&R ID code
0xF9EC
Nominal output voltage
24 VDC
Diagnostics Battery
Yes, using LED status indicator and software
Support Visual Components support
Yes
Diagnostics Module run/error
Yes, using LED status indicator and software
Standard memory RAM
1 GB LPDDR4 SDRAM
Application memory Type
2 GB eMMC flash memory
Interface IF2 Variant
1x RJ45 shielded
Interface IF2 Line length
Max. 100 m between 2 stations (segment length)
Interface IF4 Max. output current
0.5 A
Interface IF5 Variant
Type A
Temperature Storage
-40 to 70°C
Temperature Transport
-40 to 70°C
Processor L1 cache Program code
32 kB
Application memory Writable data amount Results for 5 years
21.9 GB/day
Interface IF2 Transfer Physical layer
10BASE-T/100BASE-TX/1000BASE-T
Interface IF3 Transfer Auto-MDI/MDIX
Yes
System module
Controller
Redundant operation
Yes
Real-time clock
Nonvolatile, resolution 1 s, -20 to 20 ppm accuracy at 25°C
FPU
Yes
Electrical isolation
Ethernet (IF2), POWERLINK (IF3) and X2X (IF6) isolated from each other, from other interfaces and from PLC
Support Controller redundancy
No
Support Storage health data support
Yes
Electrical isolation CPU/X2X Link supply - CPU/X2X Link power supply
Yes
Processor Type
Atom E3930
Interfaces
1x RS232, 1x Ethernet, 1x POWERLINK (V2), 2x USB, 1x X2X Link/X2X+
Integrated I/O processor
Processes I/O data points in the background
Diagnostics CPU function
Yes, using LED status indicator
Power consumption Internal I/O
0.6 W
Diagnostics RS232 data transfer
Yes, using LED status indicator
Standard memory User RAM
1 MB SRAM
Interface IF1 Variant
Connection made using 12-pin terminal block X20TB12
Interface IF2 Signal
Ethernet
Interface IF3 Type
Type 4
Interface IF4 Variant
Type A
Interface IF5 Max. output current
0.5 A
Temperature Derating
See section "Derating".
Processor L1 cache Data code
24 kB
Application memory Writable data amount Guaranteed
40 TB
Interface IF3 Transfer Physical layer
100BASE-TX
Interface IF3 Transfer Full-duplex
POWERLINK mode: No / Ethernet mode: Yes
Temperature Operation Horizontal mounting orientation
-25 to 60°C

X20CP1686X Related Documents