Powermatic Associates Logo

LTF12UC2LD W/30 Banner Electronic Components

LTF12UC2LD W/30 on Powermatic Associates
Banner

Part#:LTF12UC2LD W/30

Manufacturer:Banner

Category:Electronic Components

Product Lifecycle:Active

Product description

Banner Engineering LTF12UC2LD W/30 is a Class 2 laser photo-electric distance sensor/transmitter belonging to the LTF series. This sensor features a diffuse time-of-flight system with TEACH mode and emits a visible class 2 red laser with a wavelength of 660 nm. It is designed with a rectangular shape and constructed from a die-cast zinc alloy housing with an acrylic window. The sensor is pre-wired with a 30ft / 9m cable terminated with bare end flying leads for connectivity. It operates on a supply voltage of 12Vdc-30Vdc, with 24Vdc nominal. The LTF12UC2LD W/30 offers protection functions against overload and short-circuit, ensuring its durability in various applications. It is capable of sensing distances from 5cm to 12m and provides both analog (1 x analog output 0-10Vdc) and digital outputs (1 x digital output PNP/NPN transistor). This sensor operates within an ambient air temperature range of -20 to +55 °C and is rated with a degree of protection of IP67 NEMA 6, making it suitable for challenging environments.

Product Details

  • Power
    DC
  • Analog Output Configuration
    0-10 V dc
  • Adjustments
    Push Button; Remote Teach
  • Min Operating Temperature (°C)
    -20
  • PROFINET
    No
  • Sensing Beam
    Visible Red Laser
  • Input/Output
    Analog & Discrete
  • Sensing Beam Wavelength (nm)
    660
  • Output Saturation Voltage PNP Outputs
    < 3V @ 100ma
  • Window Material
    Acrylic
  • Max Ambient Light (Lux)
    40000
  • Feature: Chemical Resistant
    No
  • Device Type
    Sensor
  • Connection
    Flying Leads
  • Minimum Sensing Distance (mm)
    50
  • IP Rating
    IP67
  • Max Op. Relative Humidity Non-Condensing (%)
    90 at 55°C
  • Discrete Output Hysteresis (mm)
    Automatically adjusted
  • Wireless
    No
  • Sensing Mode (Detailed)
    Time of Flight
  • Max Measurement Range
    >1 m - <=20 m
  • Temperature Effect (mm/°C)
    0.25mm/C (typical)
  • Output Protection
    Protected against continuous overload and short circuit
  • Max Operating Temperature (°C)
    55
  • Minimum Window Size (mm)
    10
  • Alarm Output (mA)
    100
  • Common Ethernet Protocol
    No
  • Laser Classification
    Class 2
  • Storage Temperature (°C)
    -30 to 65
  • Spot Size (@ Reference Distance)
    6.5 mm at 50 mm, 12.5 mm at 12000 mm
  • Power/Current Consumption (exclusive of load)
    <85 mA @ 24 V (< 2.1 W)
  • Typical Laser Lifetime (Hours)
    60000
  • RS-485
    No
  • Cable Length (m)
    9
  • Indicator
    Display; LED(s)
  • Number of Pins
    5
  • Vibration
    MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
  • Supply Protection Circuitry
    Protected against reverse polarity and transient overvoltages
  • Sensing Mode (General)
    Proximity
  • Max Sensing Distance (mm)
    12000
  • Mechanical Shock
    IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
  • Minimum Response Time (ms)
    1.5
  • Housing Style
    Rectangular
  • Primary Housing Material
    Zinc Alloy Die-Cast
  • Delay at Power-up (ms)
    2000
  • Analog Voltage Output Rating
    2.5 kΩ min. load impedance
  • Laser Control
    Yes
  • Feature: Health/ Marginal Signal Output
    Yes
  • Profibus
    No
  • PC Configurable
    No
  • Analog Resolution/Discrete Repeatability
    1
  • Discrete (Switched) Outputs
    1 NPN/PNP Configurable
  • Max Discrete (Switched) Output (mA)
    100
  • Warm-up Time (minutes)
    15
  • Max Off-state Leakage Current (µA)
    PNP <10µA at 30V, NPN <200µa at 30V
  • Feature: Timing (Hold/Delay)
    Yes
  • 1-wire Serial Interface
    No
  • Quick Disconnect Type
    No QD
  • Power Supply
    12-30 V dc
  • Output Saturation Voltage NPN Outputs
    < 1.6V @ 100ma
  • NEMA Rating
    NEMA 6
  • Analog Linearity (mm)
    +/- 10
  • Feature: Remote Teach
    Yes
  • RS-422
    No
  • IO Link
    No
  • RS-232
    No
  • SSI
    No

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

LTF12UC2LD W/30 Related Documents

LTF CABLE-1630949606147.pdfLTF CABLE-1630949606145.stp

Similar products from: Banner Electronic Components

WLAW360X180DQ on Powermatic Associates

WLAW360X180DQ

Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for 1-color Cool White (W) LED illumination. It operates on a supply voltage range of 12Vdc to 30Vdc, with a nominal voltage of 24Vdc. The dimensions of this task light are L180mm x W360mm, featuring an acrylic diffused window and PBT housing. It comes pre-equipped with a 4-pin M12 Euro-style QD connector for connectivity. The rectangular-shaped light offers a degree of protection rated at IP67 and IP69K, suitable for surface or wall mounting. It can operate in ambient air temperatures ranging from -20°C to +50°C and includes 1 x digital input (12Vdc / 24Vdc) for color control.

4 in stock

Manufacturer warranty

LTF12UC2LD W/30 Banner

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LTF12UC2LD W/30 with other Electronic Components products

Power

Analog Output Configurati...

Adjustments

Min Operating Temperature...

PROFINET

Sensing Beam

Input/Output

Sensing Beam Wavelength (...

Output Saturation Voltage...

Window Material

Selected product

LTF12UC2LD W/30
Backordered
LTF12UC2LD W/30
Banner

Banner Engineering LTF12UC2LD W/30 is a Class 2 laser photo-electric distance sensor/transmitter bel...

PowerDC

Analog Output Configuration0-10 V dc

AdjustmentsPush Button; Remote Teach

Min Operating Temperature (°C)-20

PROFINETNo

Sensing BeamVisible Red Laser

Input/OutputAnalog & Discrete

Sensing Beam Wavelength (nm)660

Output Saturation Voltage PNP Outputs< 3V @ 100ma

Window MaterialAcrylic

WLAW360X180DQ
4 in stock
WLAW360X180DQ
Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for...

PowerDC

Analog Output Configuration-

Adjustments-

Min Operating Temperature (°C)-

PROFINET-

Sensing Beam-

Input/Output-

Sensing Beam Wavelength (nm)-

Output Saturation Voltage PNP Outputs-

Window Material-

MDC-5MR-2-18-SS
12 in stock
MDC-5MR-2-18-SS
Mencom

MDC, Receptacle, 5 Pole, Male Straight, 1Ft, 18awg, 4A, .5-NPT, Front Mount, Stainless Steel

Power-

Analog Output Configuration-

Adjustments-

Min Operating Temperature (°C)-

PROFINET-

Sensing Beam-

Input/Output-

Sensing Beam Wavelength (nm)-

Output Saturation Voltage PNP Outputs-

Window Material-

About the manufacturer

Banner

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

LGF36600U31XAAUOYH1 on Powermatic Associates

LGF36600U31XAAUOYH1

Schneider Electric

Square D by Schneider Electric LGF36600U31XAAUOYH1 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LGF sub-range. It features a factory-installed 24Vdc undervoltage (U/V) trip release coil and a factory-installed 1A/1B (1NO+1NC) auxiliary switch OF wire harness. Designed for PowerPacT L-Frame 600 Micrologic 3.3 (LI), this 3-pole (3P) circuit breaker is rated for 600A and 600Vac, with a busbar rating of 80% and an 18kA busbar. It offers long-time (L) and instantaneous (I) protection functions, with a rated insulation voltage (Ui) of 750 V and a rated voltage (AC) of 600Vac 600Y/347Vac. The unit is designed for individual unit mount on plate, with a net height of 382 mm, width of 153 mm, and depth of 171 mm. It has an IP40 degree of protection and operates manually via a toggle. Protection settings include L - Protection against overload adjustable from 0.3 to 1 x In (50A to 150A) and I - Instantaneous protection against short-circuit adjustable from 1.5 to 11 x In (900A to 6600A). The control voltage (AC) specification indicates that the circuit breaker opens instantaneously when the undervoltage trip supply voltage drops between 35% and 70% of its rated control voltage, allowing closing when the supply voltage reaches 85% of rated control voltage. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 600 AT, with a frame current rating of 600 AF. It has a short circuit breaking rating of 65kA at 240Vac, 35kA at 480Vac, 35kA at 480Y/277Vac, 18kA at 600Vac, 18kA at 600Y/347Vac, and 20kA at 500Vdc, all according to UL489 standards. The trip unit type is an electronic Micrologic Standard 3.3 (LI) with LI protection and no display, categorized under utilisation category A.

5 in stock
HGL36100U33X on Powermatic Associates

HGL36100U33X

Schneider Electric

Square D by Schneider Electric HGL36100U33X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HGL sub-range, featuring a PowerPact H-Frame 150 Micrologic 3.2S (LSI) design. It is a 3-pole (3P) device with a rated current of 100A and offers protection functions including Long-time (L), Short-time with fixed time delay (S), and Instantaneous (I) protection. The breaker has a rated insulation voltage (Ui) of 750 V, an AC rated voltage of 600Vac 600Y/347Vac, and a DC rated voltage of 500Vdc. It supports a mounting mode of individual unit mount on plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. The degree of protection is IP40, and it operates via a toggle (manual) mechanism. Protection settings are adjustable for overload (0.35...1 x In), short-circuit with time delay (1.5...10 x lr), and instantaneous short-circuit protection (1.5...15 x In). The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 100 AT, and the frame current rating is 150 AF. It has a short circuit breaking rating of 65kA at 240Vac, 35kA at 480Vac and 480Y/277Vac, 18kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc and 500Vdc, all according to UL489 standards. The trip unit type is an electronic Micrologic Standard 3.2S (LSI) with no display, and it falls under utilisation category A. Connections are made via lugs on both load and line sides.

0 in stock

Relevant products

LTF12IC2LD W/30 on Powermatic Associates

LTF12IC2LD W/30

Verified stock: 0

Banner Engineering LTF12IC2LD W/30 is a Class 2 laser photo-electric distance sensor/transmitter from the LTF series, designed with a diffuse time-of-flight system and TEACH mode. It features a visible class 2 red laser with a wavelength of 660 nm. The sensor is housed in a rectangular, die-cast zinc alloy casing with an acrylic window. It is pre-wired with a 30ft / 9m cable terminated with bare end flying leads for connection. This sensor operates within a supply voltage range of 12Vdc-30Vdc, with 24Vdc nominal. It offers a sensing distance of 5cm to 12m and includes both analog (1 x analog output 4-20mA) and digital outputs (1 x digital output PNP/NPN transistor). The LTF12IC2LD W/30 is equipped with protection functions against overload and short-circuit, ensuring its durability. It operates effectively in ambient air temperatures ranging from -20 to +55 °C and is rated with a degree of protection of IP67 NEMA 6, making it suitable for challenging environments.

Banner

FAQ

Out if stock but available for backorder.

Banner Engineering LTF12UC2LD W/30 is a Class 2 laser photo-electric distance sensor/transmitter belonging to the LTF series. This sensor features a diffuse time-of-flight system with TEACH mode and emits a visible class 2 red laser with a wavelength of 660 nm. It is designed with a rectangular shape and constructed from a die-cast zinc alloy housing with an acrylic window. The sensor is pre-wired with a 30ft / 9m cable terminated with bare end flying leads for connectivity. It operates on a supply voltage of 12Vdc-30Vdc, with 24Vdc nominal. The LTF12UC2LD W/30 offers protection functions against overload and short-circuit, ensuring its durability in various applications. It is capable of sensing distances from 5cm to 12m and provides both analog (1 x analog output 0-10Vdc) and digital outputs (1 x digital output PNP/NPN transistor). This sensor operates within an ambient air temperature range of -20 to +55 °C and is rated with a degree of protection of IP67 NEMA 6, making it suitable for challenging environments.

Similar products from: Electronic Components

What can I help you find today?

Recommended parts