Powermatic Associates Logo

T18SN6DQP Banner Electronic Components

T18SN6DQP on Powermatic Associates
Banner

Part#:T18SN6DQP

Manufacturer:Banner

Category:Electronic Components

Product Lifecycle:Active

Product description

T18SN6DQP T18 Series Sensors; Diffuse with Gain Control; Range: 500mm (20in) with 90% White Card Target; Input: 10-30V dc; Outupt: Bipolar; 6in. 4-Pin Euro QD Pigtail

Product Details

  • Max Sensing Distance (mm)
    500
  • Number of Pins
    4
  • Feature: Hazardous Area
    No
  • Sensing Mode (Detailed)
    Diffuse
  • Max Op. Temp. (°C)
    70
  • NEMA Rating
    NEMA 6P
  • Feature: Audible
    No
  • Sensing Mode (General)
    Proximity
  • Quick Disconnect Type
    M12 (Euro)
  • Delay at Power-up (ms)
    100
  • Adjustments
    Potentiometer
  • DeviceNet
    No
  • Power
    DC
  • Connection
    Pigtail QD
  • Special Feature: Remote Teach
    No
  • Barrel Diameter (mm)
    18
  • IO Link
    No
  • Sensing Beam
    Infrared LED
  • Min Op. Temp. (°C)
    -40
  • Repeatability (µs)
    750
  • Feature: Chemical Resistant
    Yes
  • Feature: Washdown Rated
    Yes
  • Input/Output
    Discrete
  • Max Op. Relative Humidity [%]
    90% @ 50°C
  • Indicator
    LEDs
  • Power Supply/Supply Voltage
    10-30 V dc
  • Feature: Encapsulated
    Yes
  • Housing Style
    Barrel
  • Operation
    Light/Dark Operate
  • Special Feature: Water Detection
    No
  • Lens Material
    Acrylic
  • Feature: Health/ Marginal Signal Output
    Yes
  • Primary Housing Material
    Thermoplastic
  • Output response time (ms)
    3
  • IP Rating
    IP67, IP69
  • Opposed Mode Emitter/Receiver
    N/A
  • Feature: Timing (Hold/Delay)
    No
  • Outputs
    NPN
  • Special Feature: Intrinsically Safe
    No
  • Feature: Ecolab Certified
    Yes

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

T18SN6DQP Related Documents

T18 Series Sensors (DC Voltage) -- Datasheet-1630950224756.pdf

Similar products from: Banner Electronic Components

WLAW360X180DQ on Powermatic Associates

WLAW360X180DQ

Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for 1-color Cool White (W) LED illumination. It operates on a supply voltage range of 12Vdc to 30Vdc, with a nominal voltage of 24Vdc. The dimensions of this task light are L180mm x W360mm, featuring an acrylic diffused window and PBT housing. It comes pre-equipped with a 4-pin M12 Euro-style QD connector for connectivity. The rectangular-shaped light offers a degree of protection rated at IP67 and IP69K, suitable for surface or wall mounting. It can operate in ambient air temperatures ranging from -20°C to +50°C and includes 1 x digital input (12Vdc / 24Vdc) for color control.

4 in stock

Manufacturer warranty

T18SN6DQP Banner

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare T18SN6DQP with other Electronic Components products

Max Sensing Distance (mm)

Number of Pins

Feature: Hazardous Area

Sensing Mode (Detailed)

Max Op. Temp. (°C)

NEMA Rating

Feature: Audible

Sensing Mode (General)

Quick Disconnect Type

Delay at Power-up (ms)

Selected product

T18SN6DQP
Backordered
T18SN6DQP
Banner

T18SN6DQP T18 Series Sensors; Diffuse with Gain Control; Range: 500mm (20in) with 90% White Card...

Max Sensing Distance (mm)500

Number of Pins4

Feature: Hazardous AreaNo

Sensing Mode (Detailed)Diffuse

Max Op. Temp. (°C)70

NEMA RatingNEMA 6P

Feature: AudibleNo

Sensing Mode (General)Proximity

Quick Disconnect TypeM12 (Euro)

Delay at Power-up (ms)100

WLAW360X180DQ
4 in stock
WLAW360X180DQ
Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for...

Max Sensing Distance (mm)-

Number of Pins-

Feature: Hazardous Area-

Sensing Mode (Detailed)-

Max Op. Temp. (°C)-

NEMA Rating-

Feature: Audible-

Sensing Mode (General)-

Quick Disconnect TypeM12 (Euro)

Delay at Power-up (ms)-

MDC-5MR-2-18-SS
7 in stock
MDC-5MR-2-18-SS
Mencom

MDC, Receptacle, 5 Pole, Male Straight, 1Ft, 18awg, 4A, .5-NPT, Front Mount, Stainless Steel

Max Sensing Distance (mm)-

Number of Pins-

Feature: Hazardous Area-

Sensing Mode (Detailed)-

Max Op. Temp. (°C)-

NEMA Rating-

Feature: Audible-

Sensing Mode (General)-

Quick Disconnect Type-

Delay at Power-up (ms)-

About the manufacturer

Banner

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

Relevant products

T18SP6RQP on Powermatic Associates

T18SP6RQP

Verified stock: 2

Banner Engineering T18SP6RQP is a photo-electric sensor from the T18 series, designed with a through-beam system or opposed mode. This sensor functions as a receiver alone, housed in a thermoplastic material with a polycarbonate lens. It features a pre-wired connection with a 6" / 150mm pigtail terminated with a 4-pin Euro-style M12 connector. The sensor operates on a supply voltage of 10Vdc-30Vdc, with nominal values of 12Vdc / 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6RQP offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor) for signaling. The sensing distance of this sensor is 20m, utilizing infrared (IR) light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes. The thread size for mounting is M18.

Banner

FAQ

Out if stock but available for backorder.

T18SN6DQP T18 Series Sensors; Diffuse with Gain Control; Range: 500mm (20in) with 90% White Card Target; Input: 10-30V dc; Outupt: Bipolar; 6in. 4-Pin Euro QD Pigtail

Similar products from: Electronic Components

What can I help you find today?

Recommended parts