Powermatic Associates Logo

T8AP6RQ5 Banner Electronic Components

T8AP6RQ5 on Powermatic Associates
Banner

Part#:T8AP6RQ5

Manufacturer:Banner

Category:Electronic Components

Product Lifecycle:Active

Product description

Banner Engineering T8AP6RQ5 is a photo-electric sensor from the T8 series designed with a through-beam system, functioning as the receiver component of the opposed mode setup. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6-inch (150mm) pigtail that terminates with a 4-pin Euro-style M12 connector. This sensor operates within a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc, and can function in ambient air temperatures ranging from -20 to +55 degrees Celsius. It is equipped with an IP67 and NEMA 6 rated degree of protection, ensuring its durability in various environmental conditions. The T8AP6RQ5 has an M8 cylindrical threaded/barrel shape, includes one digital output (PNP transistor), and offers a sensing distance of up to 2 meters. It emits visible red light with a wavelength of 660 nm and responds within 1ms (0.001 s). Its operating mode is Light-ON NO (Normally Open), and it features an M8 thread size for installation.

Product Details

  • Primary Housing Material
    Thermoplastic
  • Number of Pins
    4
  • Feature: Timing (Hold/Delay)
    No
  • Sensing Beam
    Visible Red LED
  • Operation
    Light Operate
  • IP Rating
    IP67
  • Feature: Encapsulated
    No
  • Outputs
    PNP
  • Output response time (ms)
    1 ON/0.5 OFF
  • Lens Material
    Acrylic
  • DeviceNet
    No
  • Sensing Mode (General)
    Opposed
  • Special Feature: Intrinsically Safe
    No
  • NEMA Rating
    NEMA 6
  • Feature: Hazardous Area
    No
  • Sensing Mode (Detailed)
    Receiver
  • Delay at Power-up (ms)
    100
  • Indicator
    LEDs
  • Feature: Chemical Resistant
    No
  • Housing Style
    Barrel
  • Min Op. Temp. (°C)
    -20
  • Opposed Mode Emitter/Receiver
    Receiver
  • Input/Output
    Discrete
  • Special Feature: Remote Teach
    No
  • Feature: Audible
    No
  • Max Sensing Distance (mm)
    2000
  • Max Op. Temp. (°C)
    55
  • Adjustments
    N/A
  • Power
    DC
  • Special Feature: Water Detection
    No
  • Barrel Diameter (mm)
    8
  • IO Link
    No
  • Power Supply/Supply Voltage
    10-30 V dc
  • Connection
    Pigtail QD
  • Max Op. Relative Humidity [%]
    90% @ 50°C
  • Quick Disconnect Type
    M12 (Euro)
  • Repeatability (µs)
    100

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

T8AP6RQ5 Related Documents

T8 Series, Opposed-Mode Models-1630949274504.pdf

Similar products from: Banner Electronic Components

WLAW360X180DQ on Powermatic Associates

WLAW360X180DQ

Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for 1-color Cool White (W) LED illumination. It operates on a supply voltage range of 12Vdc to 30Vdc, with a nominal voltage of 24Vdc. The dimensions of this task light are L180mm x W360mm, featuring an acrylic diffused window and PBT housing. It comes pre-equipped with a 4-pin M12 Euro-style QD connector for connectivity. The rectangular-shaped light offers a degree of protection rated at IP67 and IP69K, suitable for surface or wall mounting. It can operate in ambient air temperatures ranging from -20°C to +50°C and includes 1 x digital input (12Vdc / 24Vdc) for color control.

4 in stock

Manufacturer warranty

T8AP6RQ5 Banner

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare T8AP6RQ5 with other Electronic Components products

Primary Housing Material

Number of Pins

Feature: Timing (Hold/Del...

Sensing Beam

Operation

IP Rating

Feature: Encapsulated

Outputs

Output response time (ms)

Lens Material

Selected product

T8AP6RQ5
Backordered
T8AP6RQ5
Banner

Banner Engineering T8AP6RQ5 is a photo-electric sensor from the T8 series designed with a through-be...

Primary Housing MaterialThermoplastic

Number of Pins4

Feature: Timing (Hold/Delay)No

Sensing BeamVisible Red LED

OperationLight Operate

IP RatingIP67

Feature: EncapsulatedNo

OutputsPNP

Output response time (ms)1 ON/0.5 OFF

Lens MaterialAcrylic

WLAW360X180DQ
4 in stock
WLAW360X180DQ
Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for...

Primary Housing MaterialPBT

Number of Pins-

Feature: Timing (Hold/Delay)-

Sensing Beam-

Operation-

IP Rating-

Feature: Encapsulated-

Outputs-

Output response time (ms)-

Lens Material-

MDC-5MR-2-18-SS
12 in stock
MDC-5MR-2-18-SS
Mencom

MDC, Receptacle, 5 Pole, Male Straight, 1Ft, 18awg, 4A, .5-NPT, Front Mount, Stainless Steel

Primary Housing Material-

Number of Pins-

Feature: Timing (Hold/Delay)-

Sensing Beam-

Operation-

IP Rating-

Feature: Encapsulated-

Outputs-

Output response time (ms)-

Lens Material-

About the manufacturer

Banner

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

Relevant products

T8AP6D50 W/30 on Powermatic Associates

T8AP6D50 W/30

Verified stock: 0

Banner Engineering T8AP6D50 W/30 is a photo-electric sensor from the T8 series designed in a diffuse mode with a thermoplastic housing and an acrylic lens. This sensor features a pre-wired connection with a 30ft / 9m cable terminated with bare end flying leads. It operates on a supply voltage of 10Vdc-30Vdc, with nominal values of 12Vdc / 24Vdc, and can function within an ambient air temperature range of -20 to +55 °C. The T8AP6D50 W/30 offers a degree of protection rated at IP67 NEMA 6 and comes in an M8 cylindrical threaded/barrel shape. It includes 1 x digital output (PNP transistor) and has a sensing distance of 50mm. The sensor emits visible red light with a wavelength of 680 nm and has a response time of 1ms / 0.001 s. Its operating mode is Light-ON NO (Normally Open).

Banner

FAQ

Out if stock but available for backorder.

Banner Engineering T8AP6RQ5 is a photo-electric sensor from the T8 series designed with a through-beam system, functioning as the receiver component of the opposed mode setup. It features a thermoplastic housing with an acrylic lens and is pre-wired with a 6-inch (150mm) pigtail that terminates with a 4-pin Euro-style M12 connector. This sensor operates within a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc, and can function in ambient air temperatures ranging from -20 to +55 degrees Celsius. It is equipped with an IP67 and NEMA 6 rated degree of protection, ensuring its durability in various environmental conditions. The T8AP6RQ5 has an M8 cylindrical threaded/barrel shape, includes one digital output (PNP transistor), and offers a sensing distance of up to 2 meters. It emits visible red light with a wavelength of 660 nm and responds within 1ms (0.001 s). Its operating mode is Light-ON NO (Normally Open), and it features an M8 thread size for installation.

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock