547113 Festo Directional Control Valves

Product Details

• Pneumatic working port
  Sub-base, size 18 mm as per ISO 15407-1 G1/8
• Nominal width
  5 mm
• Manual override
  Non-detenting
• Switching time off
  21 ms
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Pilot medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Auxiliary pilot air port 14
  Sub-base, size 18 mm as per ISO 15407-1
• Pneumatic connection 4
  Sub-base, size 18 mm as per ISO 15407-1
• Lap
  Overlap
• Valve size
  18 mm
• Operating voltage
  24V AC
• Type code
  VSVA
• Conforms to standard
  ISO 15407-1 VDMA 24563
• Flow direction
  Non-reversible
• Pilot pressure
  3 bar ... 10 bar
• Duty cycle
  100%
• Permissible voltage fluctuations
  -15 % / +10 %
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Ambient temperature
  -5 °C ... 50 °C
• Auxiliary pilot air port 12
  Sub-base, size 18 mm as per ISO 15407-1
Pneumatic connection 5
Sub-base, size 18 mm as per ISO 15407-1
Note on materials
RoHS-compliant
Actuation type
Electrical
Reset method
Pneumatic spring
Mounting position
Any
Signal status display
LED
Coil characteristics
24 V AC: 50/60 Hz, initial power 3.1 VA, holding power 2.3 VA
Relative air humidity
0 - 90 %
Type of mounting
On sub-base
Pneumatic connection 2
Sub-base, size 18 mm as per ISO 15407-1
Pneumatic connection 1
Sub-base, size 18 mm as per ISO 15407-1
Housing material
Die-cast aluminum
Valve function
2x3/2, open/closed, monostable
Pilot pressure MPa
0.3 MPa ... 1 MPa
Design
Piston gate valve
Sealing principle
Soft
Pilot air supply port
External
Flow rate of pneumatic valve
600 l/min
Optimized flow rate of pneumatic valve pneumatically concatenated flow
400 l/min
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Corrosion resistance class (CRC)
0 - No corrosion stress
Electrical connection
Form C Without PE conductor
Pilot exhaust air port 82/84
Not ducted as per standard Ducted
Pilot interface
as per ISO 15218
Material of screws
Steel Galvanized
Operating pressure
2 bar ... 10 bar
Standard nominal flow rate
400 l/min
Degree of protection
IP65 NEMA 4
Exhaust air function
With flow control option
Type of control
Pilot-controlled
Symbol
00991818
On switching time
13 ms
Flow rate of pneumatic valve on individual sub-base
450 l/min
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Temperature of medium
-5 °C ... 50 °C
Noise level
85 dB(A)
Max. tightening torque for valve mounting
1 Nm
Product weight
174 g
Pneumatic connection 3
Sub-base, size 18 mm as per ISO 15407-1
Seals material
HNBR NBR

547113 Related Documents