547168 Festo Directional Control Valves

Product Details

• Pneumatic working port
  Sub-base, size 26 mm as per ISO 15407-1 G1/4
• Degree of protection
  IP65 NEMA 4
• Sealing principle
  Soft
• Manual override
  Non-detenting
• Flow direction
  Non-reversible
• Optimized flow rate of pneumatic valve pneumatically concatenated flow
  900 l/min
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Relative air humidity
  0 - 90 %
• Max. tightening torque for valve mounting
  2 Nm
• Auxiliary pilot air port 14
  Sub-base, size 26 mm as per ISO 15407-1
• Pilot exhaust air port 82/84
  Not ducted as per standard Ducted
• Pneumatic connection 5
  Sub-base, size 26 mm as per ISO 15407-1
• Housing material
  Die-cast aluminum
• Valve function
  2x3/2, closed, monostable
• Actuation type
  Electrical
• Design
  Piston gate valve
• Type code
  VSVA
• Mounting position
  Any
• Symbol
  00991805
Flow rate of pneumatic valve on individual sub-base
1000 l/min
Switching time off
28 ms
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-5 °C ... 50 °C
Product weight
305 g
Pneumatic connection 2
Sub-base, size 26 mm as per ISO 15407-1
Seals material
HNBR NBR
Pilot pressure MPa
0.3 MPa ... 1 MPa
Operating voltage
110V AC
Pilot air supply port
Internal
Pilot pressure
3 bar ... 10 bar
On switching time
20 ms
CE marking (see declaration of conformity)
As per EU low voltage directive
Temperature of medium
-5 °C ... 50 °C
Electrical connection
Form C as per DIN EN 175301-803
Pneumatic connection 3
Sub-base, size 26 mm as per ISO 15407-1
Operating pressure
2 bar ... 10 bar
Valve size
26 mm
Reset method
Pneumatic spring
Exhaust air function
With flow control option
Type of control
Pilot-controlled
Signal status display
LED
Coil characteristics
110 V AC: 50/60 Hz, initial power 2.9 VA, holding power 2.1 VA
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Pilot medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Type of mounting
On sub-base
Pneumatic connection 4
Sub-base, size 26 mm as per ISO 15407-1
Note on materials
RoHS-compliant
Lap
Overlap
Standard nominal flow rate
900 l/min
Nominal width
9 mm
Conforms to standard
ISO 15407-1 VDMA 24563
Flow rate of pneumatic valve
1250 l/min
Duty cycle
100%
Permissible voltage fluctuations
-15 % / +10 %
Noise level
85 dB(A)
Auxiliary pilot air port 12
Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 1
Sub-base, size 26 mm as per ISO 15407-1
Pilot interface
as per ISO 15218
Material of screws
Steel Galvanized

547168 Related Documents