Powermatic Associates Logo

8501CO16V08 Schneider Electric Electronic Components

8501CO16V08 on Powermatic Associates
Schneider Electric

Part#:8501CO16V08

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Power Relay, Type C, 2 HP, 30A resistive at 300 VAC, SPDT, 2 normally open and 2 normally closed contact, 208 VAC coil

Product Details

  • Short Name
    Type C
  • Wire Range
    AWG 10 copper
  • [In] Rated Line Current
    30 A
  • Contact Composition
    2 NO/2 NC
  • Mounting
    Panel mounting
  • Horsepower Rating
    2.0 hp
  • Phase
    1 phase
  • Product Range
    Power Relay 8501C
  • Terminal Tightening Torque
    11…15 lbf.in (1.24…1.69 N.m)
  • Terminal Connects
    Screw clamp terminal
  • Switch Function
    DPDT
  • Class Number
    8501
  • Product Type
    Power relay
  • Coil Burden
    10 VA
  • [Uc] Control Circuit Voltage
    208 V AC 60 Hz
  • Maximum Switching Voltage
    600 V AC
  • Device Application
    Suited for controlling small single phase motors and other light loads

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

8501CO16V08 Related Documents

Product Datasheet-1631035337932.pdfCatalog-1631035337969.pdf

Similar products from: Schneider Electric Electronic Components

LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

0 in stock
M9U31110 on Powermatic Associates

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

1 in stock
BJF36035 on Powermatic Associates

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BJF sub-range. It features a PowerPact B-Frame 100 TMD 3P-3t design, with a rated current of 35A and a rated voltage of 600Vac 600Y/347Vac. The breaker is designed for a fixed busbar connection with a term. nut kit on both line and load sides, offering a degree of protection of IP40. It has a mechanical durability of 15,000 operations and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) device has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It operates within Utilisation category A and has protection settings for over-current fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated impulse voltage (Uimp) is 8 kV, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 690 V. It provides thermal and magnetic protection functions, with a trip current rating of 35 AT and an electrical durability of 10,000 operations at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mode. The short circuit breaking rating varies by voltage, with 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Y/347Vac, and 50kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

7 in stock
QOB315EPD5237 on Powermatic Associates

QOB315EPD5237

Schneider Electric

Square D by Schneider Electric QOB315EPD5237 is a Miniature Circuit Breaker (MCB) designed with Equipment Protection Device (EPD) functionality, offering ground fault protection. This bolt-on mounted MCB operates with a rated current of 15A and a connection type that also utilizes a bolt-on mechanism. It is designed for use with a rated voltage (AC) of 240 V and can accommodate a wire cross-section of 14-8AWG (1 cable Cu). The QOB315EPD5237 features 3 poles and has a residual current sensitivity of 30mA / 0.03. Its protection functions include ground fault protection, and it has a short circuit breaking rating of 10kA at 240Vac. The type of terminals used in this MCB is ring tongue.

1 in stock

Manufacturer warranty

8501CO16V08 Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 8501CO16V08 with other Electronic Components products

Short Name

Wire Range

[In] Rated Line Current

Contact Composition

Mounting

Horsepower Rating

Phase

Product Range

Terminal Tightening Torqu...

Terminal Connects

Selected product

8501CO16V08
Backordered
8501CO16V08
Schneider Electric

Power Relay, Type C, 2 HP, 30A resistive at 300 VAC, SPDT, 2 normally open and 2 normally closed con...

Short NameType C

Wire RangeAWG 10 copper

[In] Rated Line Current30 A

Contact Composition2 NO/2 NC

MountingPanel mounting

Horsepower Rating2.0 hp

Phase1 phase

Product RangePower Relay 8501C

Terminal Tightening Torque11…15 lbf.in (1.24…1.69 N.m)

Terminal ConnectsScrew clamp terminal

H361
Backordered
H361
Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) s...

Short Name-

Wire Range-

[In] Rated Line Current-

Contact Composition-

Mounting-

Horsepower Rating-

Phase-

Product Range-

Terminal Tightening Torque-

Terminal Connects-

FSD78-12-D
151 in stock
FSD78-12-D
Panduit

Pan-Term® Single wire ferrule

Short Name-

Wire Range-

[In] Rated Line Current-

Contact Composition-

Mounting-

Horsepower Rating-

Phase-

Product Range-

Terminal Tightening Torque-

Terminal Connects-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

FAQ

Out if stock but available for backorder.

Power Relay, Type C, 2 HP, 30A resistive at 300 VAC, SPDT, 2 normally open and 2 normally closed contact, 208 VAC coil

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

AFP0RC32T on Powermatic Associates

AFP0RC32T

Panasonic

Panasonic AFP0RC32T is a CPU unit within the C32 sub-range, featuring an integrated Programmable Logic Controller (PLC) with transistor outputs. It offers memory backup and self-diagnostic functions. The unit connects via a MIL connector and mini USB, and is designed for DIN rail mounting. It supports the RS-232 communication protocol and can handle up to 128 x I/O points and 3 x expansion units. The memory capacity is 32K steps for programs and 32765 words / 32K words for data, supporting up to 4096 x I/O points. It includes 16 x digital inputs (24Vdc; Sink/Source; with 6 x high-speed 50kHz counters) and 16 x digital outputs (24Vdc; NPN; 200mA transistor; with 4 x 50kHz Pulse outputs/axes + 4 x 4.8kHz; 1000 resolution PWM channels). There are also 6 x analog inputs (RTD Pt100 / RTD Pt1000 / RTD Ni1000 / Resistance; with 0.1K/°F / 0.01K/°F resolution). Programming is supported in Ladder diagram (LD), Structured text (ST), Function block diagram (FBD), Sequential function chart (SFC), and Instruction list (IL). It features an 8-character password setting for program upload protection. Processing times are 80ns/step for basic instructions up to 3000 steps, with a minimum of 2.2µs, and 320ns/step for high-level instructions up to 3000 steps, with a minimum of 580ns/step for basic instructions after 3000 steps. Operating modes include periodical interrupt (0.5ms-1.5s) execution, interrupt program execution, constant scan execution, and program edition during RUN download in RUN mode.

5 in stock