ATS48C79Y Schneider Electric Electronic Components

Product Details

• Product Or Component Type
  Soft starter
• Communication Port Protocol
  Modbus
• Height
  35.04 in (890 mm)
• Device Short Name
  ATS48
• Device Connection
  In the motor supply line
• Analogue Output Type
  Current output AO 0-20 mA or 4-20 mA 500 Ohm
• Power Supply Frequency Limits
  47.5...63 Hz
• Discrete Input Logic
  Positive logic Stop, Run, LI3, LI4 < 5 V <= 2 mA > 11 V, >= 5 mA
• Transmission Rate
  4800, 9600 or 19200 bps
• Motor Starter Type
  Soft starter
• Net Weight
  253.53 lb(US) (115 kg)
• Power Supply Voltage
  208...690 V - 15...10 %
• Assembly Style
  With heat sink
• Output Absolute Accuracy Precision
  +/- 5 %
• Physical Interface
  RS485 multidrop
• Power Supply Frequency
  50...60 Hz - 5...5 %
• Discrete Input Voltage
  24 V <= 30 V
• Marking
  CE
• Utilisation Category
  AC-53A
• Range Of Product
  Altistart 48
Communication Data Link
Serial
Depth
12.40 in (315 mm)
Discrete Output Number
2
Starting Current
0.4...1.3 Icl adjustable
Operating Position
Vertical +/- 10 degree
Product Specific Application
Heavy duty industry and pumps
Function Available
External bypass (optional)
Minimum Switching Current
10 mA 6 V DC relay outputs
Connector Type
1 RJ45
Width
30.31 in (770 mm)
Max Nodes Number
31
Product Destination
Asynchronous motors
Type Of Start
Start with torque control (current limited to 5 In)
Discrete Input Number
5
Discrete Input Type
PTC, 750 Ohm 77 °F (25 °C) Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
Power Dissipation In W
2073 W for standard applications 2537 W for standard applications
Icl Nominal Current
790 A connection in the motor supply line for standard applications 790 A connection in the motor supply line for severe applications
Motor Power Range AC-3
110…220 kW 200…240 V 3 phase 250…500 kW 380…440 V 3 phase 250…500 kW 480…500 V 3 phase
Protection Type
Phase failure line Thermal protection motor Thermal protection starter
Maximum Switching Current
Logic output 0.2 A 30 V DC Relay outputs 1.8 A 230 V AC inductive, cos phi = 0.5 20 ms Relay outputs 1.8 A 30 V DC inductive, cos phi = 0.5 20 ms
Discrete Output Type
LO1) logic output 0 V common configurable LO2) logic output 0 V common configurable R1) relay outputs fault relay NO R2) relay outputs end of starting relay NO R3) relay outputs motor powered NO
Maximum Horse Power Rating
200 hp 208 V for severe applications 250 hp 208 V for standard applications 250 hp 230 V for severe applications 300 hp 230 V for standard applications 500 hp 460 V for severe applications 600 hp 460 V for standard applications
Motor Power Kw
220 kW 230 V for standard applications 355 kW 400 V for severe applications 400 kW 400 V for standard applications 400 kW 440 V for severe applications 500 kW 440 V for standard applications 500 kW 500 V for standard applications<

ATS48C79Y Related Documents