Powermatic Associates Logo

ATV61HU75Y Schneider Electric Industrial Automation Components

ATV61HU75Y on Powermatic Associates
Schneider Electric

Part#:ATV61HU75Y

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric ATV61HU75Y is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for variable speed and frequency control. It features a U/F ratio with options for 2 points, 5 points, or energy saving, and offers sensorless flux vector control in standard or energy saving modes, as well as vector control without speed feedback capable of delivering 120% of the nominal motor torque. This model includes a built-in EMC filter of class C3, a built-in heatsink, and a coated version for enhanced durability. It operates on a supply voltage of 425-759Vac, accommodating 480Vac, 500Vac, 600Vac, and 690Vac nominal values, and has dimensions of H420mm x W240mm x D236mm. The ATV61HU75Y is designed with conformal coating for chemical resistance, rated at IP20 UL type 1 for protection, and supports a rated current of 10A at 500Vac and 690Vac, 9A at 575Vac, with a maximum current of 12A for 60 seconds. Wall mounting is the prescribed mounting mode, and it supports Modbus and CANopen communication protocols. This 3-phase network device outputs frequencies ranging from 0.1-599 Hz and includes 1 analog output, 5+1 programmable digital inputs, 2 digital outputs, and 2 analog inputs. It has a current consumption of 11.2A at 500Vac and 690Vac, 9.5A at 600Vac, and provides a rated active power of 7.5kW at 690Vac and 5.5kW at 500Vac, equivalent to 7.5HP / 7-1/2HP.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Schneider Electric Industrial Automation Components

DFCC2 on Powermatic Associates

DFCC2

Schneider Electric

Schneider Electric - DFCC2

14 in stock
M9F23204 on Powermatic Associates

M9F23204

Schneider Electric

Schneider Electric M9F23204 is a Miniature Circuit Breaker (MCB) within the C60SP sub-range, designed to provide circuit protection. This MCB features a 2-pole configuration with both poles protected, and it is rated for a current of 4A. It offers a short circuit breaking rating of 14kA AIR at 240Vac, and 10kA AIR at both 480Y/277Vac and 125Vdc. The M9F23204 is equipped with a D tripping curve, ensuring precise protection against overload and short-circuit conditions. This product is compliant with UL1077 standards for safety and performance.

3 in stock
M9F43303 on Powermatic Associates

M9F43303

Schneider Electric

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

5 in stock
M9F43230 on Powermatic Associates

M9F43230

Schneider Electric

Schneider Electric M9F43230 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 2-pole configuration and a rated current of 30A. It features a rated insulation voltage (Ui) of 500V, a DC rated voltage of 60Vdc, and an AC rated voltage of 240V phase-to-neutral and 415V phase-to-phase. The M9F43230 has a rated impulse voltage (Uimp) of 6kV and offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. Both poles are protected, and it is equipped with a D tripping curve. This MCB is compliant with UL489 standards.

22 in stock
LV426801 on Powermatic Associates

LV426801

Schneider Electric

Schneider Electric LV426801 is a coil designed for undervoltage release and tripping functions, compatible with both AC and DC control voltages. For DC, it operates at 24Vdc and instantaneously opens the circuit breaker when the undervoltage trip supply voltage falls to between 35% and 70% of its rated control voltage, allowing closing when the supply voltage reaches 85% of the rated control voltage. Similarly, for AC, it functions at 24Vac under the same conditions for opening and closing the circuit breaker based on the supply voltage's percentage of the rated control voltage.

26 in stock
LV426930 on Powermatic Associates

LV426930

Schneider Electric

Schneider Electric LV426930 is a direct-mount rotary handle designed for manual operation of circuit breakers. This part is black in color, facilitating its integration into various electrical panel setups without impacting the visual consistency of the installation.

6 in stock

Manufacturer warranty

ATV61HU75Y Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

ATV630D18N4 on Powermatic Associates

ATV630D18N4

Verified stock: 0

Schneider Electric ATV630D18N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, overvoltage limitation at motor terminals, and supports predictive and preventive maintenance tracking. It includes a built-in EMC filter (class C2), is ATEX compliant, and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). Dimensions are H546mm x W211mm x D232mm, with an IP21 UL type 1 degree of protection. Rated current is 39.2A (normal-duty; 4kHz), 31.7A (heavy-duty; 4kHz), with a maximum current of 43.1A (normal-duty; for 60s) and 47.6A (heavy-duty; for 60s). Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Modbus TCP, and Ethernet on a 3-phase network with an output frequency of 0.1-500 Hz. It features 2 x analog outputs, 6 x digital inputs (with 2 programmable as pulse inputs), 1 x digital input for STO, 3 x digital outputs, and 3 x analog inputs. Current consumption varies by voltage and duty, with rated active power of 18.5kW (normal-duty) and 15kW (heavy-duty), corresponding to 25HP and 20HP respectively.

Schneider Electric

ATV630D22N4 on Powermatic Associates

ATV630D22N4

Verified stock: 0

Schneider Electric ATV630D22N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series, designed for variable and constant load torque applications with an optimized torque mode for PM (permanent magnet) motors. It features sensorless estimated flow rate, accurate measurement, and installation energy drift detection. The drive offers embedded Ethernet for direct system configuration and monitoring, integration of actual pump curves for system optimization, and limitations on overvoltage at motor terminals. It supports continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The design includes a built-in EMC filter (class C2) and is ATEX compliant. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H546mm x W211mm x D232mm, and a degree of protection of IP21 UL type 1. The rated current is 46.3A (normal-duty; 4kHz), 39.2A (heavy-duty; 4kHz), with a maximum current of 50.9A (normal-duty; for 60s) and 58.8A max. current (heavy-duty; for 60s). It is designed for wall mounting and uses Modbus, Modbus TCP, and Ethernet for communication. The network is 3-phase (3P) with an output frequency of 0.1-500 Hz. It includes 2 x analog outputs, 4 x digital inputs plus 2 additional digital inputs programmable as pulse inputs, 1 x digital input for Safe Torque Off (STO), and 3 x digital outputs, along with 3 x analog inputs supporting various signal types. The current consumption varies with voltage and duty, supporting 22kW (30HP) in normal-duty and 18.5kW (25HP) in heavy-duty applications.

Schneider Electric

ATV630D18M3 on Powermatic Associates

ATV630D18M3

Verified stock: 0

Schneider Electric ATV630D18M3 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series designed for variable and constant load torque applications, including optimized torque mode for PM (permanent magnet) motors and sensorless estimated flow rate. It features STO (Safe Torque Off up to SIL3), accurate measurement, installation energy drift detection, and embedded Ethernet for direct access to system configuration and monitoring. This model integrates actual pump curves to optimize system operating points and limits overvoltage at motor terminals. It offers continuous and historical real-time measurements with customizable dashboards, alongside predictive and preventive maintenance tracking functions. The ATV630D18M3, ATEX compliant, operates on a supply voltage of 170-264Vac, with dimensions of H673mm x W226mm x D271mm, and an IP21 UL type 1 degree of protection. It supports wall mounting and uses Modbus, Modbus TCP, and Ethernet communication protocols on a 3-phase network with an output frequency of 0.1-500 Hz. The drive has two analog outputs (0-10Vdc / 0-20mA), six digital inputs with specific functionalities including STO, and three digital outputs. It also includes three analog inputs compatible with various signal types. The rated current is 78.4A for normal-duty and 63.4A for heavy-duty operations at 4kHz, with maximum currents of 86.2A and 95.1A respectively for short durations. The rated active power is 18.5kW for normal-duty and 15kW for heavy-duty, corresponding to 25HP and 20HP respectively.

Schneider Electric

ATV630U30M3 on Powermatic Associates

ATV630U30M3

Verified stock: 0

Schneider Electric ATV630U30M3 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Process 630 series designed for variable and constant load torque applications. It features STO (Safe Torque Off up to SIL3), optimized torque mode for PM (permanent magnet) motors, sensorless estimated flow rate, and accurate measurement including installation energy drift detection. This model is ATEX compliant, operates on a supply voltage of 170-264Vac, and offers dimensions of H350mm x W144mm x D203mm with an IP21 UL type 1 degree of protection. It supports a rated current of 13.7A in normal-duty at 4kHz and 11.2A in heavy-duty at 4kHz, with maximum currents of 15.1A (normal-duty; for 60s) and 16.8A (heavy-duty; for 60s) respectively. Wall mounting is the prescribed mounting mode. Communication is facilitated through Modbus, Modbus TCP, and Ethernet on a 3-phase network with an output frequency range of 0.1-500 Hz. It includes 2 analog outputs, 7 digital inputs with programmable and pulse input options, and 3 digital outputs. The analog inputs are versatile, supporting multiple signal types. The current consumption varies with voltage and duty, and the rated active power is 3kW for normal-duty and 2.2kW for heavy-duty, equivalent to 3HP in heavy-duty applications.

Schneider Electric

FAQ

Out if stock but available for backorder.

Schneider Electric ATV61HU75Y is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 61 series designed for variable speed and frequency control. It features a U/F ratio with options for 2 points, 5 points, or energy saving, and offers sensorless flux vector control in standard or energy saving modes, as well as vector control without speed feedback capable of delivering 120% of the nominal motor torque. This model includes a built-in EMC filter of class C3, a built-in heatsink, and a coated version for enhanced durability. It operates on a supply voltage of 425-759Vac, accommodating 480Vac, 500Vac, 600Vac, and 690Vac nominal values, and has dimensions of H420mm x W240mm x D236mm. The ATV61HU75Y is designed with conformal coating for chemical resistance, rated at IP20 UL type 1 for protection, and supports a rated current of 10A at 500Vac and 690Vac, 9A at 575Vac, with a maximum current of 12A for 60 seconds. Wall mounting is the prescribed mounting mode, and it supports Modbus and CANopen communication protocols. This 3-phase network device outputs frequencies ranging from 0.1-599 Hz and includes 1 analog output, 5+1 programmable digital inputs, 2 digital outputs, and 2 analog inputs. It has a current consumption of 11.2A at 500Vac and 690Vac, 9.5A at 600Vac, and provides a rated active power of 7.5kW at 690Vac and 5.5kW at 500Vac, equivalent to 7.5HP / 7-1/2HP.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock