ATV6000D890A4242NA3 Schneider Electric Electronic Components

Product Details

• Frequency Resolution
  0.01 Hz
• Discrete Output Number
  2
• Prospective Line Isc
  31.5 kA 150 ms
• Power Factor
  96
• Height
  102.40 in (2601.0 mm)
• Speed Drive Output Frequency
  0.5…120 Hz
• Net Weight
  11361.53 lb(US) (5153.5 kg)
• Communication Port Protocol
  Ethernet IP/Modbus TCP
• Type Of Cooling
  Forced convection
• Device Short Name
  ATV6000
• Phase
  3 phase
• Maximum THDI
  <3 % conforming to IEEE 519-1992
• Discrete Output Type
  Logic output <= 30 V DC 100 mA
• Assembly Style
  In floor-standing enclosure
• Volume Of Cooling Air
  2680337.64 Gal/hr(US) (10146 m3/h)
• Supply Frequency
  50 Hz +/- 5 %
• Discrete Input Number
  10
• Apparent Power
  890 kVA
• Cable Entry
  Bottom
• Output Type
  IGBT inverter cells multilevel PWM
Noise Level
80 dB
Product Or Component Type
Medium voltage variable speed drive
[Us] Rated Supply Voltage
4.16 kV +/- 10 %
Display Type
10 inch LCD touch screen multi-language
Product Specific Application
Process and utilities
IP Degree Of Protection
IP31 conforming to IEC 60529
Width
128.35 in (3260.0 mm)
Isolation
Electrical between power and control
Colour Of Enclosure
Light grey (RAL 7035)
Output Voltage
<= power supply voltage
Depth
55.12 in (1400.0 mm)
Range Of Product
Altivar Process ATV6000
Input Type
24 pulse diode rectifier bridge
Relay Output Number
3
Analogue Output Number
2
Line Current
124 A normal duty 118 A heavy duty
Continuous Output Current
118 A normal duty 113 A heavy duty
Maximum Transient Current
177 A 3 s normal duty) 212 A 3 s heavy duty)
Analogue Input Type
configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution: 12 bits configurable current: 0...20 mA, impedance: 250 Ohm, resolution: 12 bits
Power Losses
30.3 kW normal duty 29.1 kW heavy duty
Motor Power Kw
710 kW normal duty 680 kW heavy duty
Connector Type
2 RJ45 (on the control block) for Ethernet IP/Modbus TCP 1 RJ45 (on the control block) for Modbus serial
Analogue Output Type
Configurable voltage 0...10 V DC 470 Ohm 10 bits Configurable current 0...20 mA 500 Ohm 10 bits
Energy Efficiency Ratio
0.985 inverter 0.96 total drive including transformer
EMC Filter
Integrated conforming to EN/IEC 61800-3 category C3 control Integrated conforming to EN/IEC 61800-3 category C4 power
Product Destination
Synchronous motors Permanent magnet motors Asynchronous motors
Synchronous Motor Control Profile
Permanent magnet motor Synchronous motor with external exitation Vector control
Discrete Input Type
DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm DI7, DI8 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V) POEA, POEB PWM output enable, 24 V DC (<= 30 V), impedance: > 2.2 kOhm
Overvoltage Category
II conforming to EN/IEC 61800-5-1 motor side III conforming to EN/IEC 61800-5-1 line side III conforming to EN/IEC 61800-5-1 low voltage connections
Supply
Internal supply for digital inputs and PoE 24 V DC 21…27 V, <200 mA overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection External supply
Relay Output Type
Configurable relay logic R1: fault relay NO/NC Configurable relay logic R2: sequence relay NO Configurable relay logic R3: sequence relay NO
Permissible Temporary Current Boost
1.2 x In during 60 s (normal duty) 1.5 x In during 3 s (normal duty) 1.5 x In during 60 s (heavy duty) 1.8 x In during 3 s (heavy duty)
Cable Cross Section
0.05 in² (35 mm²) line normal duty 0.05 in² (35 mm²) line heavy duty 0.05 in² (35 mm²) motor normal duty 0.05 in² (35 mm²) motor heavy duty
Electrical Connection
M10 bar for main supply M10 bar for motor Terminal, clamping capacity: 0.25...2.5 mm² for control Terminal, clamping capacity: 1.5...16 mm² for cooling fan
Asynchronous Motor Control Profile
Closed loop vector control Dynamic energy saving Constant torque standard Sensorless flux vector control Variable torque standard
Option Card
Slot A communication module Profibus DP V1 Slot A communication module Profinet Slot A communication module DeviceNet Slot A communication module CANopen daisy chain RJ45 Slot A communication module CANopen SUB-D 9 Slot A communic
Provided Equipment
Enclosure Phase-shifting transformer Power cells Plinth Human machine interface Medium voltage arrestors Cooling fans
Protection Type
Line supply overvoltage drive Line supply undervoltage drive Line supply phase loss drive Overvoltages on the DC bus drive Thermal overload for transformer: drive Cabinet overheating: drive Overcurrent drive Overload: dr

ATV6000D890A4242NA3 Related Documents