ATV630D18M3 Schneider Electric Industrial Automation Components

Product Details

• Type Of Cooling
  Forced convection
• Degree Of Protection
  UL type 1 UL 508C
• Width
  8.90 in (226 mm)
• Motor Power Range AC-3
  15…25 kW 200…240 V 3 phase
• Discrete Input Number
  8
• Product Specific Application
  Process and utilities
• Output Voltage
  <= power supply voltage
• Method Of Access
  Slave Modbus TCP
• Analogue Output Number
  2
• [Us] Rated Supply Voltage
  200...240 V - 15...10 %
• Speed Drive Output Frequency
  0.1…599 Hz
• Product Or Component Type
  Variable speed drive
• Variant
  Standard version
• Braking To Standstill
  By DC injection
• Relay Output Number
  3
• Minimum Switching Current
  Relay output R1, R2, R3 5 mA 24 V DC
• Number Of Addresses
  1…247 Modbus serial
• Supply Frequency
  50...60 Hz - 5...5 %
• Device Short Name
  ATV630
• Output Frequency
  0.0001…0.5 kHz
Exchange Mode
Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Net Weight
31.31 lb(US) (14.2 kg)
Isolation
Between power and control terminals
Nominal Switching Frequency
4 kHz
Height
26.50 in (673 mm)
Refresh Time
Relay output R1, R2, R3)5 ms +/- 0.5 ms)
Analogue Input Number
3
Range Of Product
Altivar Process ATV600
Safety Function
STO (safe torque off) SIL 3
Mounting Mode
Wall mount
Acceleration And Deceleration Ramps
Linear adjustable separately from 0.01...9999 s
EMC Filter
Without EMC filter
Prospective Line Isc
50 kA
Depth
10.67 in (271 mm)
Permissible Temporary Current Boost
1.1 x In during 60 s (normal duty) 1.5 x In during 60 s (heavy duty)
Analogue Input Type
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits
IP Degree Of Protection
IP21IEC 61800-5-1 IP21IEC 60529
Accuracy
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Continuous Output Current
78.4 A 4 kHz normal duty 63.4 A 4 kHz heavy duty
Apparent Power
22.7 kVA 240 V normal duty) 18.7 kVA 240 V heavy duty)
Synchronous Motor Control Profile
Permanent magnet motor Synchronous reluctance motor
Product Destination
Synchronous motors Asynchronous motors
Linearity Error
AI1, AI2, AI3 +/- 0.15 % of maximum value analog input AO1, AO2: +/- 0.2 % for analog output
Analogue Output Type
Software-configurable voltage AO1, AO2 0...10 V DC 470 Ohm 10 bits Software-configurable current AO1, AO2: 0...20 mA, resolution 10 bits
Motor Power Kw
18.5 kW normal duty) 15 kW heavy duty)
Frequency Resolution
Display unit 0.1 Hz Analog input 0.012/50 Hz
Maximum Horse Power Rating
25 hp normal duty 20 hp heavy duty
Maximum Transient Current
86.2 A 60 s normal duty) 95.1 A 60 s heavy duty)
Connector Type
RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP RJ45 (on the remote graphic terminal) for Modbus serial
Switching Frequency
2...12 kHz adjustable 4...12 kHz with derating factor
Asynchronous Motor Control Profile
Optimized torque mode Variable torque standard Constant torque standard
Communication Port Protocol
Ethernet Modbus serial Modbus TCP
Electrical Connection
Control: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16 Line side: screw terminal 35...50 mm²/AWG 3...AWG 1 Motor screw terminal 35...50 mm² AWG 3...AWG 1
Discrete Input Type
DI1...DI6 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm DI5, DI6 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V) STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm
Supply
External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection Internal supply for di
Relay Output Type
Configurable relay logic R1 fault relay NO/NC 100000 cycles Configurable relay logic R2 sequence relay NO 100000 cycles Configurable relay logic R3 sequence relay NO 100000 cycles
Motor Slip Compensation
Automatic whatever the load Can be suppressed Not available in permanent magnet motor law Adjustable
Discrete Input Logic
Positive logic (source) (DI1...DI6), < 5 V (state 0), > 11 V (state 1) Negative logic (sink) (DI1...DI6), > 16 V (state 0), < 10 V (state 1) Positive logic (source) (DI5, DI6), < 0.6 V (state 0), > 2.5 V (state 1) Positive logic (source) ST
Input Compatibility
DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2 DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68 STOA, STOB discrete input level 1 PLC EN/IEC 61131-2
Sampling Duration
2 ms +/- 0.5 ms DI1...DI4) - discrete input 5 ms +/- 1 ms DI5, DI6) - discrete input 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input 10 ms +/- 1 ms AO1) - analog output
Line Current
66.7 A 200 V normal duty) 54.5 A 240 V normal duty) 53.1 A 200 V heavy duty) 44.9 A 240 V heavy duty)
Maximum Switching Current
Relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC Relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms
Local Signalling
3 LEDs for local diagnostic 3 LEDs (dual colour) for embedded communication status 4 LEDs (dual colour) for communication module status 1 LED (red) for presence of voltage
Option Card
Slot A: communication module, Profibus DP V1 Slot A: communication module, Profinet Slot A: communication module, DeviceNet Slot A: communication module, Modbus TCP/EtherNet/IP Slot A: communication module, CANopen daisy chain RJ45

Variable Speed Drive Application Selection
Building - HVAC Compressor centrifugal Food and beverage processing Other application Mining mineral and metal Fan Mining mineral and metal Pump Oil and gas Fan Water and waste water Other application Building - HVAC Screw co
Protection Type
Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive

ATV630D18M3 Related Documents