Powermatic Associates Logo

HLF36080 Schneider Electric Electronic Components

HLF36080 on Powermatic Associates
Schneider Electric

Part#:HLF36080

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

PowerPact H Circuit Breaker,ThermMagn,80A,3P,600V,50kA

Product Details

  • Electrical Connection
    Busbar connection line Busbar connection load
  • Continuous Current Rating
    80 %
  • Width
    4.12 in (104.65 mm)
  • Depth
    4.36 in (110.74 mm)
  • Height
    6.4 in (162.56 mm)
  • Number Of Poles
    3P
  • Line Rated Current
    80 A
  • Tightening Torque
    44.25 lbf.in (5 N.m) 0.00…0.15 in² (2.5…95 mm²) (AWG 14...AWG 3/0)
  • Magnetic Tripping Current
    1450 A
  • Magnetic Hold Current
    800 A
  • Mounting Mode
    Unit mount
  • Range Of Product
    PowerPact H
  • Breaking Capacity Code
    L

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

HLF36080 Related Documents

Product Datasheet-1631041179262.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
LC1F400G7 on Powermatic Associates

LC1F400G7

Schneider Electric

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. It operates with a control voltage (AC) range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 110kW at 220-230Vac, 200kW at 380-400Vac, 220kW at 415Vac, 250kW at 440Vac, 257kW at 500Vac, 280kW at 660-690Vac, and 185kW at 1000Vac, all under AC-3 conditions. The LC1F400G7 boasts a mechanical durability of 10,000,000 operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

1 in stock
LJB65 on Powermatic Associates

LJB65

Schneider Electric

WIREWAY 6 x 6 - N12 - 5 ft lg

2 in stock

Manufacturer warranty

HLF36080 Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare HLF36080 with other Electronic Components products

Electrical Connection

Continuous Current Rating

Width

Depth

Height

Number Of Poles

Line Rated Current

Tightening Torque

Magnetic Tripping Current

Magnetic Hold Current

Selected product

HLF36080
Backordered
HLF36080
Schneider Electric

PowerPact H Circuit Breaker,ThermMagn,80A,3P,600V,50kA

Electrical ConnectionBusbar connection line Busba...

Continuous Current Rating80 %

Width4.12 in (104.65 mm)

Depth4.36 in (110.74 mm)

Height6.4 in (162.56 mm)

Number Of Poles3P

Line Rated Current80 A

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Tripping Current1450 A

Magnetic Hold Current800 A

HDF36050
7 in stock
HDF36050
Schneider Electric

Square D by Schneider Electric HDF36050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionBusbar connection line Busba...

Continuous Current Rating-

Width4.12 in (104.65 mm)

Depth4.36 in (110.74 mm)

Height6.4 in (162.56 mm)

Number Of Poles3P

Line Rated Current50 A

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Tripping Current850 A

Magnetic Hold Current400 A

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionTerminal nut ON and OFF end

Continuous Current Rating-

Width3.19 in (81 mm)

Depth3.15 in (80 mm)

Height5.39 in (137 mm)

Number Of Poles3P

Line Rated Current35 A

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Tripping Current-

Magnetic Hold Current-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

LMHCE573C on Powermatic Associates

LMHCE573C

Novanta IMS

Novanta IMS LMHCE573C is a stepper motor characterized by its integration of a driver and a high-torque DC stepper motor within the high-torque stepper motors sub-range. It features an incremental magnetic encoder, triple (3) motor stack, and operates on closed-loop hMTechnology. For connectivity, it is equipped with a 4-pin M12 male connector, a 12-pin M12 male connector, and a 5-pin M12 male connector, supporting Ethernet/IP and Modbus TCP communication protocols. The motor is designed for a supply voltage range of 12Vdc to 60Vdc, with optimal performance at 24Vdc and 48Vdc. It mounts via a 57x57mm flange and offers a degree of protection rated at IP65. The LMHCE573C has a moment of inertia of 0.37kg.cm^2, a stall torque of 294N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock
MDM1FSD23A7-EP on Powermatic Associates

MDM1FSD23A7-EP

Novanta IMS

Novanta IMS MDM1FSD23A7-EP is a stepper motor that features an integrated driver and a 2-phase DC stepper motor with SPI. It is designed with an external single-end 256-line optical encoder and a single motor stack in the Plus version, which includes a universal input. The connection is facilitated through a 30cm / 12" bare end flying leads IDC connector. This stepper motor operates on a supply voltage range of 12Vdc-75Vdc, including 24Vdc, 48Vdc, and 72Vdc options. It is mounted via a 57x57mm flange and can operate in ambient air temperatures ranging from 0 to +85°C. The MDM1FSD23A7-EP offers a degree of protection rated at IP20, has a moment of inertia of 0.18kg.cm^2, and provides a stall torque of 64N.cm. Its resolution is defined by a 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

PowerPact H Circuit Breaker,ThermMagn,80A,3P,600V,50kA

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock