Powermatic Associates Logo

HLL26070 Schneider Electric Electronic Components

HLL26070 on Powermatic Associates
Schneider Electric

Part#:HLL26070

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Circuit breaker, PowerPacT H, thermal magnetic, unit mount, 70A, 2 pole, 50 kA, 600 VAC, 80% rated

Product Details

  • Electrical Connection
    Lugs load Lugs line
  • Continuous Current Rating
    80 %
  • Depth
    4.36 in (110.74 mm)
  • Width
    4.12 in (104.65 mm)
  • Height
    6.4 in (162.56 mm)
  • Tightening Torque
    44.25 lbf.in (5 N.m) 0.00…0.15 in² (2.5…95 mm²) (AWG 14...AWG 3/0)
  • Magnetic Tripping Current
    1450 A
  • Mounting Mode
    Unit mount
  • Magnetic Hold Current
    800 A
  • Breaking Capacity Code
    L
  • Number Of Poles
    2P
  • Line Rated Current
    70 A
  • Product Or Component Type
    Circuit breaker
  • Range Of Product
    PowerPact H

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

HLL26070 Related Documents

Product Datasheet-1631041396073.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
LC1F400G7 on Powermatic Associates

LC1F400G7

Schneider Electric

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. It operates with a control voltage (AC) range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 110kW at 220-230Vac, 200kW at 380-400Vac, 220kW at 415Vac, 250kW at 440Vac, 257kW at 500Vac, 280kW at 660-690Vac, and 185kW at 1000Vac, all under AC-3 conditions. The LC1F400G7 boasts a mechanical durability of 10,000,000 operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

1 in stock
LJB65 on Powermatic Associates

LJB65

Schneider Electric

WIREWAY 6 x 6 - N12 - 5 ft lg

2 in stock

Manufacturer warranty

HLL26070 Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare HLL26070 with other Electronic Components products

Electrical Connection

Continuous Current Rating

Depth

Width

Height

Tightening Torque

Magnetic Tripping Current

Mounting Mode

Magnetic Hold Current

Breaking Capacity Code

Selected product

HLL26070
Backordered
HLL26070
Schneider Electric

Circuit breaker, PowerPacT H, thermal magnetic, unit mount, 70A, 2 pole, 50 kA, 600 VAC, 80% rated

Electrical ConnectionLugs load Lugs line

Continuous Current Rating80 %

Depth4.36 in (110.74 mm)

Width4.12 in (104.65 mm)

Height6.4 in (162.56 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Tripping Current1450 A

Mounting ModeUnit mount

Magnetic Hold Current800 A

Breaking Capacity CodeL

HDF36050
7 in stock
HDF36050
Schneider Electric

Square D by Schneider Electric HDF36050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionBusbar connection line Busba...

Continuous Current Rating-

Depth-

Width4.12 in (104.65 mm)

Height6.4 in (162.56 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Tripping Current850 A

Mounting ModeUnit mount

Magnetic Hold Current400 A

Breaking Capacity CodeD

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionTerminal nut ON and OFF end

Continuous Current Rating-

Depth-

Width3.19 in (81 mm)

Height5.39 in (137 mm)

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Magnetic Tripping Current-

Mounting ModeClip-on 35 mm symmetrical DI...

Magnetic Hold Current-

Breaking Capacity CodeJ

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

HLL26030 on Powermatic Associates

HLL26030

Verified stock: 0

Square D by Schneider Electric HLL26030 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HLL sub-range, featuring a PowerPact H-Frame 150 TMD 2P 30A 600Vac/500Vdc 50kA design. It is equipped with lugs on both load and line sides for connection, and it operates with 2 poles (2P). This MCCB provides thermal protection for overload scenarios and magnetic protection for short-circuit conditions. It has a rated current of 30A, with a rated insulation voltage (Ui) of 750 V, and it can handle rated voltages of 600Vac 600Y/347Vac and 500Vdc. The unit is designed for individual mounting on a plate, with dimensions of 163 mm in height, 104 mm in width, and 86 mm in depth. It offers an IP40 degree of protection and features a manual toggle operating mode. The protection settings include over-current fixed at 30A, short-circuit hold current fixed at 350A, and short-circuit trip current fixed at 750A. Its rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 30 AT, with a frame current rating of 150 AF. The short circuit breaking rating varies with voltage, including 125kA at 240Vac, 100kA at 480Vac and 480Y/277Vac, 50kA at 600Vac and 600Y/347Vac, 20kA at 250Vdc, and 50kA at 500Vdc, all under UL489 standards. The trip unit type is thermal-magnetic (fixed), with no display, and it falls under utilisation category A.

Schneider Electric

FAQ

Out if stock but available for backorder.

Circuit breaker, PowerPacT H, thermal magnetic, unit mount, 70A, 2 pole, 50 kA, 600 VAC, 80% rated

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock