LC1D40AV7 Schneider Electric Industrial Automation Components


Part#:LC1D40AV7
Manufacturer:Schneider Electric
Category:Industrial Automation Components
Product Lifecycle:Active
Product description
Schneider Electric LC1D40AV7 is a magnetic contactor from the Deca sub-range, featuring an EverLink(TM) terminal design and screw connections. It is a 3-pole (3P; 3NO) contactor with a rated current of 60A (AC-1) and 40A (440Vac; AC-3). Designed for DIN rail mounting, it has a net width of 55 mm and offers a degree of protection of IP20. The control voltage (AC) ranges from 320-440Vac (400Vac nominal; 50Hz; 0.8...1.1 x Uc) to 340-440Vac (400Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power spans from 11kW (220-230Vac; AC-3) to 30kW (660-690Vac; AC-3), and the rated power (HP) ranges from 3HP (115Vac; single-phase; 50Hz/60Hz; UL/CSA) to 30HP (575-600Vac; 3-phase; 50Hz/60Hz; UL/CSA). The mechanical durability at no load is 6,000,000 operations, and the electrical durability with load is 1,500,000 operations. The rated voltage (AC) phase-to-phase is 690 V.
Product Details
- Device Short Name LC1D
- Rated Breaking Capacity 800 A 440 V power circuit IEC 60947
- Coil Technology Without built-in suppressor module
- Product Name TeSys D
- Range TeSys
- Overvoltage Category III
- Product Or Component Type Contactor
- Control Circuit Type AC at 50/60 Hz
- [Uimp] Rated Impulse Withstand Voltage 6 kV IEC 60947
- Minimum Switching Voltage 17 V signalling circuit
- [Uc] Control Circuit Voltage 400 V AC 50/60 Hz
- Power Pole Contact Composition 3 NO
- Auxiliary Contact Composition 1 NO + 1 NC
- Average Impedance 1.5 mOhm - Ith 60 A 50 Hz power circuit
- Poles Description 3P
- Front Cover With
- Signalling Circuit Frequency 25...400 Hz
- Heat Dissipation 4…5 W 50/60 Hz
- Insulation Resistance > 10 MOhm for signalling circuit
- Minimum Switching Current 5 mA signalling circuit
- Mechanical Durability 6 Mcycles
- Maximum Operating Rate 3600 cyc/h 140 °F (60 °C)
- Power Dissipation Per Pole 2.4 W AC-3 5.4 W AC-1
- Operating Time 4...19 ms opening 12...26 ms closing
- [Ith] Conventional Free Air Thermal Current 10 A 140 °F (60 °C) signalling circuit 60 A 140 °F (60 °C) power circuit
- Auxiliary Contacts Type Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
- Electrical Durability 1.4 Mcycles 60 A AC-1 <= 440 V 1.5 Mcycles 40 A AC-3 <= 440 V
- Contactor Application Motor control Resistive load
- [Ue] Rated Operational Voltage Power circuit: <= 690 V AC 25...400 Hz Power circuit <= 300 V DC
- [Ie] Rated Operational Current 60 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit 40 A 140 °F (60 °C)) <= 440 V AC AC-3 power circuit
- Mounting Support Plate Rail
- Safety Reliability Level B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Non-Overlap Time 1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
- Inrush Power In VA 140 VA 60 Hz 0.75 68 °F (20 °C)) 160 VA 50 Hz 0.75 68 °F (20 °C))
- Hold-In Power Consumption In VA 13 VA 60 Hz 0.3 68 °F (20 °C)) 15 VA 50 Hz 0.3 68 °F (20 °C))
- Irms Rated Making Capacity 140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 800 A 440 V power circuit IEC 60947
- Utilisation Category AC-3 AC-4 AC-1
- Associated Fuse Rating 10 A gG signalling circuit IEC 60947-5-1 80 A gG <= 690 V type 1 power circuit 80 A gG <= 690 V type 2 power circuit
- Tightening Torque Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Power circuit 70.81 lbf.in (8 N.m) EverLink BTR screw connectors 0.04…0.05 in² (25…35 mm²) hexagon
- Connections - Terminals Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)fle
- Control Circuit Voltage Limits 0.3...0.6 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz 0.8...1.1 Uc -40…140 °F (-40…60 °C) operational AC 50 Hz 0.85...1.1 Uc -40…140 °F (-40…60 °C) operational AC 60 Hz 1...1.1 Uc 140…158 °F (60…70 °C) operational AC 50/60 Hz
- Product Certifications GOST CSA UL CCC
- [Ui] Rated Insulation Voltage Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL Power circuit 690 V IEC 60947-4-1
- Motor Power Kw 18.5 kW 380...400 V AC 50/60 Hz AC-3) 11 kW 220...230 V AC 50/60 Hz AC-3) 22 kW 415...440 V AC 50/60 Hz AC-3) 22 kW 500 V AC 50/60 Hz AC-3) 30 kW 660...690 V AC 50/60 Hz AC-3) 9 kW 400 V AC 50/60 Hz AC-4)
- [Icw] Rated Short-Time Withstand Current 320 A 104 °F (40 °C) - 10 s power circuit 720 A 104 °F (40 °C) - 1 s power circuit 72 A 104 °F (40 °C) - 10 min power circuit 165 A 104 °F (40 °C) - 1 min power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circ
- Standards CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
- Motor Power HP (UL / CSA) 5 hp 230/240 V at AC 50/60 Hz for 1 phase 10 hp 230/240 V at AC 50/60 Hz for 3 phase 30 hp 575/600 V at AC 50/60 Hz for 3 phase 10 hp 200/208 V at AC 50/60 Hz for 3 phase 3 hp 115 V at AC 50/60 Hz for 1 phase 30 hp 460/480 V at AC
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1D40AV7 on Powermatic Associates is $271.93. Order now.
LC1D40AV7 Related Documents
Similar products from: Schneider Electric Industrial Automation Components
Manufacturer warranty
LC1D40AV7 Schneider Electric
$271.93
Your price can be lower.
Log in or Create account to check your discount
Select Qty:
$271.93
$271.93 each
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Compare LC1D40AV7 with other Industrial Automation Components products
Device Short Name
Rated Breaking Capacity
Coil Technology
Product Name
Range
Overvoltage Category
Product Or Component Type
Control Circuit Type
[Uimp] Rated Impulse With...
Minimum Switching Voltage
Selected product

LC1D40AV7
Schneider Electric
Schneider Electric LC1D40AV7 is a magnetic contactor from the Deca sub-range, featuring an EverLink(...
Device Short NameLC1D
Rated Breaking Capacity800 A 440 V power circuit IE...
Coil TechnologyWithout built-in suppressor ...
Product NameTeSys D
RangeTeSys
Overvoltage CategoryIII
Product Or Component TypeContactor
Control Circuit TypeAC at 50/60 Hz
[Uimp] Rated Impulse Withstand Voltage6 kV IEC 60947
Minimum Switching Voltage17 V signalling circuit
About the manufacturer
Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...
Recently viewed products
Relevant products
FAQ
What is the price of LC1D40AV7?
Purchase the LC1D40AV7 from Powermatic Associates at the price of $271.93. Order today.
Out if stock but available for backorder.
Schneider Electric LC1D40AV7 is a magnetic contactor from the Deca sub-range, featuring an EverLink(TM) terminal design and screw connections. It is a 3-pole (3P; 3NO) contactor with a rated current of 60A (AC-1) and 40A (440Vac; AC-3). Designed for DIN rail mounting, it has a net width of 55 mm and offers a degree of protection of IP20. The control voltage (AC) ranges from 320-440Vac (400Vac nominal; 50Hz; 0.8...1.1 x Uc) to 340-440Vac (400Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power spans from 11kW (220-230Vac; AC-3) to 30kW (660-690Vac; AC-3), and the rated power (HP) ranges from 3HP (115Vac; single-phase; 50Hz/60Hz; UL/CSA) to 30HP (575-600Vac; 3-phase; 50Hz/60Hz; UL/CSA). The mechanical durability at no load is 6,000,000 operations, and the electrical durability with load is 1,500,000 operations. The rated voltage (AC) phase-to-phase is 690 V.
Similar products from: Industrial Automation Components
What can I help you find today?