Powermatic Associates Logo

MJP36350 Schneider Electric Electronic Components

MJP36350 on Powermatic Associates
Schneider Electric

Part#:MJP36350

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

PowerPact M Molded CASE CIRCUIT BREAKER 600V 350A 3P

Product Details

  • Electrical Connection
    Lugs load Terminal nut line
  • Depth
    8.27 in (210 mm)
  • Width
    0.32 in (8.06 mm)
  • Continuous Current Rating
    80 %
  • Tightening Torque
    442.54 lbf.in (50 N.m) 0.15…0.37 in² (95…240 mm²) (AWG 3/0...500 kcmil)
  • Terminal Identifier
    AL800M23K
  • Number Of Poles
    3P
  • Product Or Component Type
    Circuit breaker
  • Magnetic Tripping Current
    700…3500 A
  • Breaking Capacity Code
    J
  • Line Rated Current
    350 A
  • Height
    12.86 in (326.6 mm)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

MJP36350 Related Documents

Catalog-1631031281236.pdfInstruction Sheet-1631031281233.pdfProduct Datasheet-1631031281241.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
LC1F400G7 on Powermatic Associates

LC1F400G7

Schneider Electric

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. It operates with a control voltage (AC) range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 110kW at 220-230Vac, 200kW at 380-400Vac, 220kW at 415Vac, 250kW at 440Vac, 257kW at 500Vac, 280kW at 660-690Vac, and 185kW at 1000Vac, all under AC-3 conditions. The LC1F400G7 boasts a mechanical durability of 10,000,000 operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

1 in stock
LJB65 on Powermatic Associates

LJB65

Schneider Electric

WIREWAY 6 x 6 - N12 - 5 ft lg

2 in stock

Manufacturer warranty

MJP36350 Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare MJP36350 with other Electronic Components products

Electrical Connection

Depth

Width

Continuous Current Rating

Tightening Torque

Terminal Identifier

Number Of Poles

Product Or Component Type

Magnetic Tripping Current

Breaking Capacity Code

Selected product

MJP36350
Backordered
MJP36350
Schneider Electric

PowerPact M Molded CASE CIRCUIT BREAKER 600V 350A 3P

Electrical ConnectionLugs load Terminal nut line

Depth8.27 in (210 mm)

Width0.32 in (8.06 mm)

Continuous Current Rating80 %

Tightening Torque442.54 lbf.in (50 N.m) 0.15…...

Terminal IdentifierAL800M23K

Number Of Poles3P

Product Or Component TypeCircuit breaker

Magnetic Tripping Current700…3500 A

Breaking Capacity CodeJ

HDF36050
7 in stock
HDF36050
Schneider Electric

Square D by Schneider Electric HDF36050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionBusbar connection line Busba...

Depth4.36 in (110.74 mm)

Width4.12 in (104.65 mm)

Continuous Current Rating80 %

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Terminal Identifier-

Number Of Poles3P

Product Or Component TypeCircuit breaker

Magnetic Tripping Current850 A

Breaking Capacity CodeD

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Electrical ConnectionTerminal nut ON and OFF end

Depth3.15 in (80 mm)

Width3.19 in (81 mm)

Continuous Current Rating80 %

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Terminal Identifier-

Number Of Poles3P

Product Or Component TypeCircuit breaker

Magnetic Tripping Current-

Breaking Capacity CodeJ

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

MJP36800 on Powermatic Associates

MJP36800

Verified stock: 0

Square D by Schneider Electric MJP36800 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact M-Frame 800 ET1 (LI) 3P 800A 600Vac 25kA lug OFF end 80% rated design, with a net height of 210 mm, net width of 153 mm, and net depth of 204 mm. This MCCB has a rated current of 800A and operates at a rated voltage of 600Vac 600Y/347Vac. It is equipped with a Term. nut kit for fixed busbar connection on the line side and lugs connection on the load side. The MJP36800 falls under the PowerPacT MJP sub-range and features 3 poles (3P), with a rated operating voltage (Ue) of 600 V. Its protection functions include L (Long-time protection) and I (Instantaneous protection), with a trip current rating of 800 AT and a frame current rating of 800 AF. The short circuit breaking rating is specified as 100kA (240Vac; UL489), 65kA (480Vac; UL489), 65kA (480Y/277Vac; UL489), 25kA (600Vac; UL489), and 25kA (600Y/347Vac; UL489). The trip unit type is an electronic ET1.0 (LI) with no display, and it offers protection settings of L - Protection against overload fixed at 800A and I - Instantaneous protection against short-circuit adjustable 0.2...1 x In (1200A...6000A). It is categorized under utilisation category A.

Schneider Electric

FAQ

Out if stock but available for backorder.

PowerPact M Molded CASE CIRCUIT BREAKER 600V 350A 3P

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock