Powermatic Associates Logo

QBL32125YP Schneider Electric Electronic Components

QBL32125YP on Powermatic Associates
Schneider Electric

Part#:QBL32125YP

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

PowerPact Q - molded case circuit breaker - 3-pole - 10 kA - 240 V - 125 A

Product Details

  • Product Or Component Type
    Circuit breaker
  • Width
    4.5 in (114.30 mm)
  • Breaking Capacity Code
    B
  • Line Rated Current
    125 A
  • Tightening Torque
    247.82 lbf.in (28 N.m) 0.04…0.23 in² (25…150 mm²) (AWG 4...300 kcmil)
  • Height
    6.47 in (164.34 mm)
  • Magnetic Tripping Current
    2400 A
  • Magnetic Hold Current
    1200 A
  • Depth
    3.93 in (99.82 mm)
  • Trip Unit Technology
    Thermal-magnetic
  • Continuous Current Rating
    80 %

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

QBL32125YP Related Documents

Product Datasheet-1631034542560.pdfCatalog-1631034542551.pdf

Similar products from: Schneider Electric Electronic Components

QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

0 in stock
M9U31110 on Powermatic Associates

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, falling under the C60H-DC sub-range. It features a single pole configuration and is rated for a current of 10A with a maximum voltage capacity of 500Vdc. This MCB is compliant with UL1077 standards, ensuring its suitability for a variety of applications. It offers a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U31110 is equipped with a D tripping curve, ensuring precise protection for connected circuits by targeting the specific characteristics of DC loads.

1 in stock
BJF36035 on Powermatic Associates

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BJF sub-range. It features a PowerPact B-Frame 100 TMD 3P-3t design, with a rated current of 35A and a rated voltage of 600Vac 600Y/347Vac. The breaker is designed for a fixed busbar connection with a term. nut kit on both line and load sides, offering a degree of protection of IP40. It has a mechanical durability of 15,000 operations and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) device has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It operates within Utilisation category A and has protection settings for over-current fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated impulse voltage (Uimp) is 8 kV, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 690 V. It provides thermal and magnetic protection functions, with a trip current rating of 35 AT and an electrical durability of 10,000 operations at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mode. The short circuit breaking rating varies by voltage, with 100kA at 240Vac, 65kA at 480Vac and 480Y/277Vac, 25kA at 600Y/347Vac, and 50kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

7 in stock
QOB315EPD5237 on Powermatic Associates

QOB315EPD5237

Schneider Electric

Square D by Schneider Electric QOB315EPD5237 is a Miniature Circuit Breaker (MCB) designed with Equipment Protection Device (EPD) functionality, offering ground fault protection. This bolt-on mounted MCB operates with a rated current of 15A and a connection type that also utilizes a bolt-on mechanism. It is designed for use with a rated voltage (AC) of 240 V and can accommodate a wire cross-section of 14-8AWG (1 cable Cu). The QOB315EPD5237 features 3 poles and has a residual current sensitivity of 30mA / 0.03. Its protection functions include ground fault protection, and it has a short circuit breaking rating of 10kA at 240Vac. The type of terminals used in this MCB is ring tongue.

1 in stock

Manufacturer warranty

QBL32125YP Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare QBL32125YP with other Electronic Components products

Product Or Component Type

Width

Breaking Capacity Code

Line Rated Current

Tightening Torque

Height

Magnetic Tripping Current

Magnetic Hold Current

Depth

Trip Unit Technology

Selected product

QBL32125YP
Backordered
QBL32125YP
Schneider Electric

PowerPact Q - molded case circuit breaker - 3-pole - 10 kA - 240 V - 125 A

Product Or Component TypeCircuit breaker

Width4.5 in (114.30 mm)

Breaking Capacity CodeB

Line Rated Current125 A

Tightening Torque247.82 lbf.in (28 N.m) 0.04…...

Height6.47 in (164.34 mm)

Magnetic Tripping Current2400 A

Magnetic Hold Current1200 A

Depth3.93 in (99.82 mm)

Trip Unit TechnologyThermal-magnetic

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Product Or Component TypeCircuit breaker

Width3.19 in (81 mm)

Breaking Capacity CodeJ

Line Rated Current35 A

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Height5.39 in (137 mm)

Magnetic Tripping Current-

Magnetic Hold Current-

Depth3.15 in (80 mm)

Trip Unit TechnologyThermal-magnetic

M9U31110
1 in stock
M9U31110
Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads,...

Product Or Component TypeMiniature circuit-breaker

Width0.71 in (18 mm)

Breaking Capacity Code-

Line Rated Current10 A 77 °F (25 °C) EN/IEC 60...

Tightening Torque22.13 lbf.in (2.5 N.m) top o...

Height3.19 in (81 mm)

Magnetic Tripping Current-

Magnetic Hold Current-

Depth2.87 in (73 mm)

Trip Unit TechnologyThermal-magnetic

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

QBL32200LW on Powermatic Associates

QBL32200LW

Verified stock: 0

Square D by Schneider Electric QBL32200LW is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact Q-Frame 250 TMD 3P 200A 240Vac 10kA design with lugs connection on both line and load sides plus Control Wire terminals (CWT) on both ends, ensuring a secure and stable connection. This breaker has a net height of 114 mm, a width of 164 mm, and a depth of 100 mm. It operates with a rated current of 200A and a rated voltage of 240Vac. The QBL32200LW is equipped with three poles (3P) and offers thermal and magnetic protection functions to guard against overload and short-circuit conditions. Its trip current rating is set at 200 AT, with a frame current rating of 250 AF. The short circuit breaking rating stands at 10kA, compliant with UL489 standards. This MCCB utilizes a fixed thermal-magnetic trip unit without a display and is classified under the utilisation category A. Protection settings are fixed at 200A for over-current and 1200A/2400A for short-circuit hold/trip currents, respectively.

Schneider Electric

QBL32000S22LW on Powermatic Associates

QBL32000S22LW

Verified stock: 0

Square D by Schneider Electric QBL32000S22LW is a front-operated toggle moulded case non-fusible automatic switch-disconnector designed for individual unit mount on plate. It features a PowerPact Q-Frame 250 TMD 3P 225A 240Vac 10kA design with lugs connection on both line and load sides, complemented by Control Wire terminals (CWT) on both ends. This switch-disconnector is part of the PowerPacT QBL sub-range, with a rated current of 225A, a rated voltage (AC) of 225Vac, and a rated operating voltage (Ue) of 240 V. It has a net height of 413 mm, a net width of 421 mm, and a net depth of 369 mm. The device is equipped with 3 poles (3P), a trip current rating of 225 AT, a frame current rating of 250 AF, and falls under the utilisation category A.

Schneider Electric

QBL32150 on Powermatic Associates

QBL32150

Verified stock: 0

Square D by Schneider Electric QBL32150 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact Q-Frame 250 TMD 3P 150A 240Vac with a 10kA short circuit breaking rating and lugs on both load and line sides for connection. This MCCB has a net height of 114 mm, a net width of 164 mm, and a net depth of 100 mm. It operates with a rated current of 150A and a rated voltage of 240Vac. The QBL32150 is equipped with three poles (3P) and provides thermal protection for overload and magnetic protection for short-circuits, with a trip current rating of 150 AT and a frame current rating of 250 AF. Its trip unit type is thermal-magnetic (fixed) without a display. The protection settings are over-current fixed at 150A, short-circuit hold current fixed at 1200A, and short-circuit trip current fixed at 2400A, all within the PowerPacT QBL sub-range.

Schneider Electric

QBL32225 on Powermatic Associates

QBL32225

Verified stock: 0

Square D by Schneider Electric QBL32225 is a Moulded Case Circuit Breaker (MCCB) designed for individual unit mount on plate. It features a PowerPact Q-Frame 250 TMD 3P 225A 240Vac with a 10kA short circuit breaking rating and lugs on both load and line sides for connection. This MCCB has a net height of 114 mm, a net width of 164 mm, and a net depth of 100 mm. It operates with a rated current of 225A and a rated voltage of 240Vac. The QBL32225 is equipped with three poles (3P) and offers thermal protection for overload and magnetic protection for short-circuits, with a trip current rating of 225 AT and a frame current rating of 250 AF. Its trip unit type is thermal-magnetic (fixed) without a display. The protection settings are over-current, fixed at 225A, and short-circuit protection with a hold current fixed at 1200A and a trip current fixed at 2400A.

Schneider Electric

FAQ

Out if stock but available for backorder.

PowerPact Q - molded case circuit breaker - 3-pole - 10 kA - 240 V - 125 A

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock