X20SI8110 B&R Electronic Components

Product Details

• Integrated protection
  Reverse polarity protection
• Additional power dissipation caused by actuators (resistive) [W]
  0.8
• Input current at 24 VDC
  Min. 2 mA to max. 3.28 mA
• Insulation voltage between channel and bus
  500 Veff
• Short-circuit current
  15 mAeff
• Installation elevation above sea level
  0 to 2000 m, no limitation
• System requirements Safety Release
  1.7 or later
• Diagnostics Module run/error
  Yes, using LED status indicator and software
• Electrical isolation Channel - Bus
  Yes
• Certifications ATEX
  Zone 2, II 3G Ex nA nC IIA T5 Gc; IP20, Ta (see X20 user's manual); FTZÚ 09 ATEX 0083X
• Certifications UL
  cULus E115267; Industrial control equipment
• IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 Proof test interval (PT)
  20 years
• IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFD
  <2*10-5
• Relative humidity Operation
  5 to 95%, non-condensing
• Nominal voltage
  24 VDC
• Nominal output current
  50 mA
• Pitch
  12.5+0.2 mm
• Blackout mode Function
  Module functionality
• EN ISO 13849-1:2015 MTTFD
  2500 years
• Mounting orientation Horizontal
  Yes
Temperature Transport
-40 to 85°C
Temperature Operation Horizontal mounting orientation
0 to 60°C
Max. I/O cycle time
1 ms
Input voltage
24 VDC -15% / +20%
RDS(on)
80 Ω
System requirements Automation Runtime
4.0 or later
Blackout mode Scope
Module
Certifications EAC
Yes
Input filter Software
Configurable between 0 and 500 ms
IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd openSAFETY wireless
<1*10-14 * Number of openSAFETY packets per hour
Variant
Type A
Output protection
Shutdown of individual channels in the event of overload or short circuit
Degree of protection per EN 60529
IP20
Electrical isolation Channel - Channel
No
Certifications DNV
In preparation
IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 SFF
>90%
Mounting orientation Vertical
Yes
Temperature Operation Vertical mounting orientation
0 to 50°C
Status indicators
I/O function per channel, operating state, module status
Line length between signal source (pulse output or external signal) and input
Max. 60 m with unshielded line; Max. 400 m with shielded line
Note
Order 1x safety-keyed terminal block separately.; Order 1x safety-keyed bus module (single-width) separately.
Blackout mode Standalone mode
No
Certifications UKCA
Yes
IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 SIL CL
SIL 3
IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd openSAFETY wired
Negligible
B&R ID code
0xE742
Input resistance
Min. 7.33 kΩ
Switching voltage
I/O power supply minus voltage drop due to RDS(on)
Diagnostics Inputs
Yes, using LED status indicator and software
Certifications Functional safety
cULus FSPC E361559; Energy and industrial systems; Certified for functional safety; ANSI UL 1998:2013
EN ISO 13849-1:2015 Mission time
Max. 20 years
Temperature Derating
See section "Derating".
IEC 61508:2010,; IEC 61511:2004,; EN 62061:2013 PFH / PFHd Per channel
<1*10-10
Quantity
8
Input circuit
Sink
Leakage current when the output is switched off
0.1 mA
System requirements SafeDESIGNER
3.4.0 or later
Power consumption Internal I/O
2.5 W
EN ISO 13849-1:2015 Category
Cat. 3 when using individual input channels, ; Cat. 4 when using input channel pairs (e.g. SI1 and SI2) or more than 2 input channels
Switching threshold High
>15 VDC
Relative humidity Transport
5 to 95%, non-condensing
I/O module
8 safe type A digital inputs, 4 pulse outputs, 24 VDC
Input characteristics per EN 61131-2
Type 1
Peak short-circuit current
0.5 A for 120 µs
System requirements Automation Studio
4.0 or later
Power consumption Bus
0.4 W
EN ISO 13849-1:2015 DC
>94%
Input filter Hardware
≤150 μs
Relative humidity Storage
5 to 95%, non-condensing
Voltage range
24 VDC -15% / +20%
Error detection time
100 ms
Total nominal current
200 mA
System requirements mapp Technology Package
mapp Safety 5.7.0 or later
Certifications CE
Yes
EN ISO 13849-1:2015 PL
PL e
Switching threshold Low
<5 VDC
Temperature Storage
-40 to 85°C

X20SI8110 Related Documents