ATV630D37M3 Schneider Electric Industrial Automation Components

Product Details

• Product Specific Application
  Process and utilities
• Speed Drive Output Frequency
  0.1…599 Hz
• Variant
  Standard version
• Prospective Line Isc
  50 kA
• Output Voltage
  <= power supply voltage
• Height
  36.30 in (922 mm)
• Analogue Output Number
  2
• Supply Frequency
  50...60 Hz - 5...5 %
• Braking To Standstill
  By DC injection
• Output Frequency
  0.0001…0.5 kHz
• Width
  11.42 in (290 mm)
• Discrete Input Number
  8
• Product Or Component Type
  Variable speed drive
• Analogue Input Number
  3
• Refresh Time
  Relay output R1, R2, R3)5 ms +/- 0.5 ms)
• Device Short Name
  ATV630
• Acceleration And Deceleration Ramps
  Linear adjustable separately from 0.01...9999 s
• Exchange Mode
  Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
• Type Of Cooling
  Forced convection
• Net Weight
  124.78 lb(US) (56.6 kg)
Degree Of Protection
UL type 1 UL 508C
EMC Filter
Without EMC filter
[Us] Rated Supply Voltage
200...240 V - 15...10 %
Mounting Mode
Wall mount
Method Of Access
Slave Modbus TCP
Depth
12.72 in (323 mm)
Minimum Switching Current
Relay output R1, R2, R3 5 mA 24 V DC
Nominal Switching Frequency
2.5 kHz
Safety Function
STO (safe torque off) SIL 3
Range Of Product
Altivar Process ATV600
Number Of Addresses
1…247 Modbus serial
Isolation
Between power and control terminals
Relay Output Number
3
Motor Power Range AC-3
30…50 kW 200…240 V 3 phase
Maximum Horse Power Rating
50 hp normal duty 40 hp heavy duty
Synchronous Motor Control Profile
Permanent magnet motor Synchronous reluctance motor
Product Destination
Asynchronous motors Synchronous motors
Motor Power Kw
37 kW normal duty) 30 kW heavy duty)
Switching Frequency
2.5...8 kHz with derating factor 2...8 kHz adjustable
Permissible Temporary Current Boost
1.1 x In during 60 s (normal duty) 1.5 x In during 60 s (heavy duty)
Frequency Resolution
Display unit 0.1 Hz Analog input 0.012/50 Hz
IP Degree Of Protection
IP21IEC 61800-5-1 IP21IEC 60529
Continuous Output Current
149 A 2.5 kHz normal duty 123 A 2.5 kHz heavy duty
Apparent Power
44.8 kVA 240 V normal duty) 36.8 kVA 240 V heavy duty)
Linearity Error
AI1, AI2, AI3 +/- 0.15 % of maximum value analog input AO1, AO2: +/- 0.2 % for analog output
Analogue Output Type
Software-configurable voltage AO1, AO2 0...10 V DC 470 Ohm 10 bits Software-configurable current AO1, AO2: 0...20 mA, resolution 10 bits
Accuracy
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Analogue Input Type
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits
Maximum Transient Current
163.9 A 60 s normal duty) 184.5 A 60 s heavy duty)
Connector Type
RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP RJ45 (on the remote graphic terminal) for Modbus serial
Communication Port Protocol
Modbus serial Ethernet Modbus TCP
Sampling Duration
2 ms +/- 0.5 ms DI1...DI4) - discrete input 5 ms +/- 1 ms DI5, DI6) - discrete input 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input 10 ms +/- 1 ms AO1) - analog output
Electrical Connection
Control: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16 Line side screw terminal 70...120 mm² AWG 2/0...250 kcmil Motor: screw terminal 95...120 mm²/AWG 3...250 kcmil
Asynchronous Motor Control Profile
Variable torque standard Optimized torque mode Constant torque standard
Relay Output Type
Configurable relay logic R1 fault relay NO/NC 100000 cycles Configurable relay logic R2 sequence relay NO 100000 cycles Configurable relay logic R3 sequence relay NO 100000 cycles
Supply
External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection Internal supply for di
Input Compatibility
DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2 DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68 STOA, STOB discrete input level 1 PLC EN/IEC 61131-2
Discrete Input Type
DI1...DI6 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm DI5, DI6 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V) STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm
Line Current
128 A 200 V normal duty) 107.8 A 240 V normal duty) 104.7 A 200 V heavy duty) 88.6 A 240 V heavy duty)
Local Signalling
3 LEDs for local diagnostic 3 LEDs (dual colour) for embedded communication status 4 LEDs (dual colour) for communication module status 1 LED (red) for presence of voltage
Discrete Input Logic
Positive logic (source) (DI1...DI6), < 5 V (state 0), > 11 V (state 1) Negative logic (sink) (DI1...DI6), > 16 V (state 0), < 10 V (state 1) Positive logic (source) (DI5, DI6), < 0.6 V (state 0), > 2.5 V (state 1) Positive logic (source) ST
Motor Slip Compensation
Can be suppressed Not available in permanent magnet motor law Automatic whatever the load Adjustable
Maximum Switching Current
Relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC Relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms
Option Card
Slot A: communication module, Profibus DP V1 Slot A: communication module, Profinet Slot A: communication module, DeviceNet Slot A: communication module, Modbus TCP/EtherNet/IP Slot A: communication module, CANopen daisy chain RJ45

Variable Speed Drive Application Selection
Compressor centrifugal Building - HVAC Other application Food and beverage processing Fan Mining mineral and metal Pump Mining mineral and metal Fan Oil and gas Other application Water and waste water Screw compressor Buildin
Protection Type
Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive

ATV630D37M3 Related Documents