Powermatic Associates Logo

LC1DT40GD Schneider Electric Industrial Automation Components

LC1DT40GD on Powermatic Associates
Schneider Electric

Part#:LC1DT40GD

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric LC1DT40GD is a magnetic contactor from the Deca sub-range, designed with screw connections and four poles (4P; 4NO). It has a rated current of 40A (AC-1) and is suitable for DIN rail mounting. The contactor measures 45 mm in net width and offers a degree of protection of IP20. It operates with a control voltage (DC) range of 94-156Vdc (125Vdc nominal; 0.75...1.25 x Uc) and has a rated operating voltage (Ue) of 690 V. This model includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both of the 1NO+1NC instantaneous type. It is capable of withstanding a rated impulse voltage (Uimp) of 6 kV. The mechanical durability of the LC1DT40GD, at no load, is rated at 15,000,000 operations, and it supports a rated voltage (AC) phase-to-phase of 690 V.

Product Details

  • Contactor Application
    Resistive load
  • [Uimp] Rated Impulse Withstand Voltage
    6 kV IEC 60947
  • Signalling Circuit Frequency
    25...400 Hz
  • Device Short Name
    LC1D
  • [Ie] Rated Operational Current
    40 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit
  • Rated Breaking Capacity
    450 A 440 V power circuit IEC 60947
  • Minimum Switching Voltage
    17 V signalling circuit
  • Control Circuit Type
    DC standard
  • Time Constant
    28 ms
  • Power Pole Contact Composition
    4 NO
  • Poles Description
    4P
  • Product Name
    TeSys D
  • [Uc] Control Circuit Voltage
    125 V DC
  • Power Dissipation Per Pole
    3.2 W AC-1
  • Maximum Operating Rate
    3600 cyc/h 140 °F (60 °C)
  • Coil Technology
    Built-in bidirectional peak limiting diode suppressor
  • Product Or Component Type
    Contactor
  • Electrical Durability
    1.4 Mcycles 40 A AC-1 <= 440 V
  • Hold-In Power Consumption In W
    5.4 W 68 °F (20 °C)
  • Mechanical Durability
    30 Mcycles
  • Average Impedance
    2 mOhm - Ith 40 A 50 Hz power circuit
  • Utilisation Category
    AC-1
  • Auxiliary Contact Composition
    1 NO + 1 NC
  • Range
    TeSys
  • Overvoltage Category
    III
  • Front Cover
    With
  • Inrush Power In W
    5.4 W 68 °F (20 °C))
  • Insulation Resistance
    > 10 MOhm for signalling circuit
  • Minimum Switching Current
    5 mA signalling circuit
  • [Ith] Conventional Free Air Thermal Current
    10 A 140 °F (60 °C) signalling circuit 40 A 140 °F (60 °C) power circuit
  • Auxiliary Contacts Type
    Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
  • Safety Reliability Level
    B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
  • [Ue] Rated Operational Voltage
    Power circuit <= 690 V AC 25...400 Hz Power circuit <= 300 V DC
  • Operating Time
    16...24 ms opening 53.55...72.45 ms closing
  • Mounting Support
    Rail Plate
  • Non-Overlap Time
    1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
  • Associated Fuse Rating
    10 A gG signalling circuit IEC 60947-5-1 63 A gG <= 690 V type 1 power circuit 40 A gG <= 690 V type 2 power circuit
  • Irms Rated Making Capacity
    140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 450 A 440 V power circuit IEC 60947
  • Control Circuit Voltage Limits
    0.1...0.25 Uc -40…158 °F (-40…70 °C) drop-out DC 0.7...1.25 Uc -40…140 °F (-40…60 °C) operational DC 1...1.25 Uc 140…158 °F (60…70 °C) operational DC
  • Connections - Terminals
    Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)fle
  • Tightening Torque
    Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Power circuit 15.05 lbf.in (1.7 N.m) connector flat Ø 6 mm Power circuit 15.05 lbf.in (1.7 N.
  • Standards
    CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
  • [Ui] Rated Insulation Voltage
    Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL Power circuit 690 V IEC 60947-4-1
  • [Icw] Rated Short-Time Withstand Current
    50 A 104 °F (40 °C) - 10 min power circuit 120 A 104 °F (40 °C) - 1 min power circuit 240 A 104 °F (40 °C) - 10 s power circuit 380 A 104 °F (40 °C) - 1 s power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circ
  • Product Certifications
    DNV CSA UL GOST BV LROS (Lloyds register of shipping) CCC GL RINA

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1DT40GD on Powermatic Associates is $243.25. Order now.

LC1DT40GD Related Documents

Product Datasheet-1631038419145.pdfInstruction Sheet-1631038419151.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
BDL36070 on Powermatic Associates

BDL36070

Schneider Electric

Square D by Schneider Electric BDL36070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDL sub-range, featuring a PowerPact B-Frame 100 TMD 3P 70A design for 600Y/347Vac with a 14kA breaking capacity and 80% rated Everlink (Creep compensating) lugs on both line and load sides. It has a rated impulse voltage (Uimp) of 8 kV and offers a degree of protection of IP40. The rated current is 70A, with a rated voltage (AC) of 600Vac 600Y/347Vac. It boasts a mechanical durability of 20,000 operations at no load and can be mounted on a DIN rail or as an individual unit on a plate. This 3-pole (3P) circuit breaker has dimensions of 137 mm in height, 80 mm in depth, and 81 mm in width. It falls under utilisation category A and features over-current protection fixed at 70A, short-circuit hold current fixed at 640A, and short-circuit trip current fixed at 960A. The rated voltage (DC) is 250Vdc, with a rated insulation voltage (Ui) of 800 V and a rated operating voltage (Ue) of 525 V. It provides thermal protection for overload and magnetic protection for short-circuits, with a trip current rating of 70 AT and an electrical durability of 10,000 operations with load at 440Vac. The frame current rating is 100 AF, and it operates via a toggle (manual) mechanism. The short circuit breaking rating varies by voltage, with 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, and 14kA at 600Y/347Vac according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

0 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock
M9F53315 on Powermatic Associates

M9F53315

Schneider Electric

Schneider Electric M9F53315 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed to comply with UL489 standards. This 3-pole MCB has a rated current of 15A and features a rated insulation voltage (Ui) of 500V, with a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. The rated voltage (AC) for phase-to-phase is 440V. All three poles are protected, and it operates with a D tripping curve.

3 in stock

Manufacturer warranty

LC1DT40GD Schneider Electric

$243.25

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$243.25

$243.25 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LC1DT40GD with other Industrial Automation Components products

Contactor Application

[Uimp] Rated Impulse With...

Signalling Circuit Freque...

Device Short Name

[Ie] Rated Operational Cu...

Rated Breaking Capacity

Minimum Switching Voltage

Control Circuit Type

Time Constant

Power Pole Contact Compos...

Selected product

LC1DT40GD
Backordered
LC1DT40GD
Schneider Electric

Schneider Electric LC1DT40GD is a magnetic contactor from the Deca sub-range, designed with screw co...

Contactor ApplicationResistive load

[Uimp] Rated Impulse Withstand Voltage6 kV IEC 60947

Signalling Circuit Frequency25...400 Hz

Device Short NameLC1D

[Ie] Rated Operational Current40 A 140 °F (60 °C)) <= 440 ...

Rated Breaking Capacity450 A 440 V power circuit IE...

Minimum Switching Voltage17 V signalling circuit

Control Circuit TypeDC standard

Time Constant28 ms

Power Pole Contact Composition4 NO

LC1DT256BL
16 in stock
LC1DT256BL
Schneider Electric

Schneider Electric LC1DT256BL is a magnetic contactor from the Deca sub-range designed with a low-co...

Contactor ApplicationResistive load

[Uimp] Rated Impulse Withstand Voltage6 kV IEC 60947

Signalling Circuit Frequency-

Device Short NameLC1D

[Ie] Rated Operational Current25 A 140 °F (60 °C)) <= 440 ...

Rated Breaking Capacity-

Minimum Switching Voltage-

Control Circuit TypeDC low consumption

Time Constant-

Power Pole Contact Composition4 NO

LC1D40ABD
2 in stock
LC1D40ABD
Schneider Electric

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM)...

Contactor ApplicationResistive load Motor control

[Uimp] Rated Impulse Withstand Voltage6 kV IEC 60947

Signalling Circuit Frequency-

Device Short NameLC1D

[Ie] Rated Operational Current60 A 140 °F (60 °C)) <= 440 ...

Rated Breaking Capacity-

Minimum Switching Voltage-

Control Circuit TypeDC standard

Time Constant-

Power Pole Contact Composition3 NO

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

LC1DT256BL on Powermatic Associates

LC1DT256BL

Verified stock: 16

Schneider Electric LC1DT256BL is a magnetic contactor from the Deca sub-range designed with a low-consumption coil that consumes less than 2.4W. It features ring-lugs connections and is equipped with 4 poles (4NO) capable of handling a rated current of 25A under AC-1 conditions. This contactor is designed for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (DC) range of 19.2-30Vdc, with a nominal voltage of 24Vdc. The LC1DT256BL includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both of the instantaneous type, and has a mechanical durability of 15 million operations at no load. It can handle a rated impulse voltage (Uimp) of 6 kV and is suitable for phase-to-phase rated voltages up to 690 V AC.

Schneider Electric

LC1D40ABD on Powermatic Associates

LC1D40ABD

Verified stock: 2

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor is rated for currents of 60A (AC-1) and 40A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. It has a net width of 55 mm and offers a degree of protection rated at IP20. The control voltage (DC) ranges from 18-30Vdc, with a nominal 24Vdc, and it operates at a rated voltage (Ue) of up to 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power spans from 11kW at 220-230Vac to 30kW at 660-690Vac in AC-3 category. The rated power in horsepower (HP) varies from 3HP at 115Vac in single-phase to 30HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D40ABD is up to 6,000,000 operations, and its electrical durability with load reaches 1,500,000 operations. The rated voltage for phase-to-phase connections is 690 V.

Schneider Electric

LC1D50A6BD on Powermatic Associates

LC1D50A6BD

Verified stock: 2

Schneider Electric LC1D50A6BD is a magnetic contactor from the Deca sub-range, featuring an EverLink(TM) terminal design for ring-lugs connections. This 3-pole (3P; 3NO) contactor supports a rated current of 80A for AC-1 applications and 50A for 440Vac AC-3 applications. It is designed for DIN rail mounting and has a net width of 55 mm. The LC1D50A6BD offers a degree of protection of IP20 and operates with a control voltage (DC) of 18-30Vdc (24Vdc nominal; 0.75...1.25 x Uc). Its rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV. This contactor can handle rated active power ranging from 15kW at 220-230Vac to 33kW at 660-690Vac in AC-3 applications. It also features 1 normally closed (NC) auxiliary contact and instantaneous auxiliary contacts type of 1NO+1NC. The rated power in horsepower (HP) varies from 3HP at 115Vac in single-phase to 40HP at 575-600Vac in three-phase applications, according to UL/CSA standards. Its mechanical durability is rated at 6 million operations at no load, and its electrical durability is rated at 1.45 million operations with load. The rated voltage (AC) for phase-to-phase applications is 690 V.

Schneider Electric

LC1D50ABD on Powermatic Associates

LC1D50ABD

Verified stock: 0

Schneider Electric LC1D50ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor supports a rated current of 80A for AC-1 and 50A for 440Vac in AC-3 applications. It is designed for DIN rail mounting and has a net width of 55 mm. The device offers an IP20 degree of protection and operates with a control voltage of 18-30Vdc (24Vdc nominal). The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. It delivers rated active power ranging from 15kW at 220-230Vac to 33kW at 660-690Vac in AC-3, and rated power in horsepower (HP) from 3HP at 115Vac to 40HP at 575-600Vac, covering various configurations and voltages for UL/CSA standards. The mechanical durability of the LC1D50ABD is rated at 6,000,000 operations, and its electrical durability with load is 1,450,000 operations. The rated voltage for phase-to-phase applications is 690 V.

Schneider Electric

LC1D65008B7 on Powermatic Associates

LC1D65008B7

Verified stock: 0

Schneider Electric LC1D65008B7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 4 poles (2NO+2NC). It has a rated current of 80A under AC-1 conditions and is suitable for DIN rail mounting. The contactor measures 85 mm in net width and offers an IP20 degree of protection. It operates with a control voltage range of 19.2-26.4Vac at 50Hz (24Vac nominal; 0.8...1.1 x Uc) and 20.4-26.4Vac at 60Hz (24Vac nominal; 0.85...1.1 x Uc). The rated operating voltage (Ue) is up to 690 V, and it has no normally open (NO) or normally closed (NC) auxiliary contacts. The rated impulse voltage (Uimp) is 6 kV, and it boasts a mechanical durability of 15,000,000 operations at no load. The rated voltage for phase-to-phase applications is 690 V AC.

Schneider Electric

FAQ

What is the price of LC1DT40GD?
Purchase the LC1DT40GD from Powermatic Associates at the price of $243.25. Order today.

Out if stock but available for backorder.

Schneider Electric LC1DT40GD is a magnetic contactor from the Deca sub-range, designed with screw connections and four poles (4P; 4NO). It has a rated current of 40A (AC-1) and is suitable for DIN rail mounting. The contactor measures 45 mm in net width and offers a degree of protection of IP20. It operates with a control voltage (DC) range of 94-156Vdc (125Vdc nominal; 0.75...1.25 x Uc) and has a rated operating voltage (Ue) of 690 V. This model includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both of the 1NO+1NC instantaneous type. It is capable of withstanding a rated impulse voltage (Uimp) of 6 kV. The mechanical durability of the LC1DT40GD, at no load, is rated at 15,000,000 operations, and it supports a rated voltage (AC) phase-to-phase of 690 V.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

ZB4BS84430 on Powermatic Associates

ZB4BS84430

Schneider Electric

Schneider Electric ZB4BS84430 is a push-button designed for emergency switching OFF (ESO) or shutdown (ESD) functions within the XB4 sub-range. It features a chromium-plated bezel made of metal, ensuring durability and a sleek appearance. The button is round in shape, with a mushroom head diameter of 22 mm and a base diameter of 40 mm. It offers a high degree of protection with ratings of IP66, IP69, IP69K, NEMA 4X, and NEMA 13, suitable for demanding environments. The mechanical durability of this component is rated at 300,000 operations at no load, indicating its longevity. Dimensions include a net height of 40 mm, depth of 57 mm, and width of 40 mm. It is equipped with 1 NC (Normally Closed) auxiliary contact for connectivity. The operating mode of the ZB4BS84430 allows for both turn-to-release and stay-put (maintained/latched) actions, providing flexibility in emergency situations.

1 in stock