Powermatic Associates Logo

LRL36400U53X Schneider Electric Electronic Components

LRL36400U53X on Powermatic Associates
Schneider Electric

Part#:LRL36400U53X

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

PowerPact L Circuit Breaker,Micrologic5.3E,400A,3P,600V,100kA

Product Details

  • Width
    7.27 in (184.66 mm)
  • Number Of Poles
    3P
  • Depth
    6.61 in (167.89 mm)
  • Continuous Current Rating
    80 %
  • Breaking Capacity Code
    R
  • Product Or Component Type
    Circuit breaker
  • Height
    13.93 in (353.82 mm)
  • Terminal Identifier
    AL600LS52K3
  • Electrical Connection
    Lugs load Lugs line
  • Tightening Torque
    442.54 lbf.in (50 N.m) 0.11…0.37 in² (70…240 mm²) (AWG 2/0...500 kcmil) 442.54 lbf.in (50 N.m) 0.05…0.47 in² (35…300 mm²) (AWG 2...600 kcmil)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

LRL36400U53X Related Documents

Product Datasheet-1631038026303.pdf

Similar products from: Schneider Electric Electronic Components

LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

0 in stock
LC1F400G7 on Powermatic Associates

LC1F400G7

Schneider Electric

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. It operates with a control voltage (AC) range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 110kW at 220-230Vac, 200kW at 380-400Vac, 220kW at 415Vac, 250kW at 440Vac, 257kW at 500Vac, 280kW at 660-690Vac, and 185kW at 1000Vac, all under AC-3 conditions. The LC1F400G7 boasts a mechanical durability of 10,000,000 operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

1 in stock

Manufacturer warranty

LRL36400U53X Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LRL36400U53X with other Electronic Components products

Width

Number Of Poles

Depth

Continuous Current Rating

Breaking Capacity Code

Product Or Component Type

Height

Terminal Identifier

Electrical Connection

Tightening Torque

Selected product

LRL36400U53X
Backordered
LRL36400U53X
Schneider Electric

PowerPact L Circuit Breaker,Micrologic5.3E,400A,3P,600V,100kA

Width7.27 in (184.66 mm)

Number Of Poles3P

Depth6.61 in (167.89 mm)

Continuous Current Rating80 %

Breaking Capacity CodeR

Product Or Component TypeCircuit breaker

Height13.93 in (353.82 mm)

Terminal IdentifierAL600LS52K3

Electrical ConnectionLugs load Lugs line

Tightening Torque442.54 lbf.in (50 N.m) 0.11…...

HDF36050
6 in stock
HDF36050
Schneider Electric

Square D by Schneider Electric HDF36050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Width4.12 in (104.65 mm)

Number Of Poles3P

Depth4.36 in (110.74 mm)

Continuous Current Rating80 %

Breaking Capacity CodeD

Product Or Component TypeCircuit breaker

Height6.4 in (162.56 mm)

Terminal Identifier-

Electrical ConnectionBusbar connection line Busba...

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Width3.19 in (81 mm)

Number Of Poles3P

Depth3.15 in (80 mm)

Continuous Current Rating80 %

Breaking Capacity CodeJ

Product Or Component TypeCircuit breaker

Height5.39 in (137 mm)

Terminal Identifier-

Electrical ConnectionTerminal nut ON and OFF end

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

M12300B on Powermatic Associates

M12300B

Lenze

Lenze M12300B is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for general purpose applications. It features dimensions of H400mm x W261mm x D212mm and supports Modbus communication protocol. This model is equipped with thermal overload protection and solid state motor overload protection. It operates with a rated current of 92A at 200Vac and 80A at 230Vac, and it is designed for a supply voltage range of 200Vac-240Vac, accommodating 208Vac, 220Vac, and 230Vac. The M12300B can be mounted in a control cabinet or on a surface/wall and is designed to operate in ambient air temperatures ranging from -10 to +50°C. It offers a degree of protection of NEMA 1 and is suitable for a 3-phase network with an input frequency of 48-62 Hz and an output frequency of 0-120 Hz. The device includes 1 analog output proportional to speed, 1 analog output proportional to load, 4 digital inputs, 1 digital input for start, 1 digital input for stop, 2 digital outputs (NPN; sinking), 1 analog input (0-10Vdc), and 1 analog input (4-20mA). It has a rated active power of 22kW and a rated power of 30HP for the specified voltage range of 200-240Vac.

0 in stock

Relevant products

LRL36400M37X on Powermatic Associates

LRL36400M37X

Verified stock: 0

Square D by Schneider Electric LRL36400M37X is a Motor Protection Circuit Breaker (MPCB) within the PowerPacT LRL sub-range, designed for electronic motor protection, manual motor starting, and motor circuit protection. This PowerPacT L-Frame 600 Micrologic 1.3M (LI) model features a 3-pole (3P) design with a rated current of 400A and a rated insulation voltage (Ui) of 750 V. It operates at a rated voltage (AC) of 600Vac 600Y/347Vac, with a mounting mode that allows for individual unit mount on a plate. The connection type includes lugs on both load and line sides, ensuring a secure connection. It offers protection functions including instantaneous protection (I), with protection settings fixed at 4800A for short-circuit incidents. The device has a rated operating voltage (Ue) of 690 V and a rated impulse voltage (Uimp) of 8 kV. Its net dimensions are 382 mm in height, 153 mm in width, and 171 mm in depth, with a degree of protection rated at IP40. The operating mode is manual toggle, and it features a trip current rating of 400 AT, a frame current rating of 600 AF, and a short circuit breaking rating that varies based on voltage levels, reaching up to 200kA for certain voltages under UL489 standards. The trip unit type is an electronic Micrologic 1.3M (I) with no display, categorized under utilisation category A.

Schneider Electric

LRL36400U31X on Powermatic Associates

LRL36400U31X

Verified stock: 0

Square D by Schneider Electric LRL36400U31X is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT LRL sub-range, featuring a PowerPact L-Frame 600 Micrologic 3.3 (LI) design. It is a 3-pole (3P) device with a rated current of 400A and a rated insulation voltage (Ui) of 750 V. The MCCB operates at a rated voltage (AC) of 600Vac 600Y/347Vac and has a mounting mode that requires individual unit mount on a plate. It measures 382 mm in height, 153 mm in width, and 171 mm in depth, with a degree of protection classified as IP40. The operating mode is manual toggle, and it offers protection functions including long-time protection (L) adjustable from 0.3 to 1 x In (125A to 400A) and instantaneous protection (I) adjustable from 1.5 to 12 x In (600A to 4800A). The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 400 AT, and the frame current rating is 600 AF. Its short circuit breaking rating varies with voltage, offering 200kA at 240Vac, 480Vac, and 480Y/277Vac; 100kA at 600Vac and 600Y/347Vac; and 50kA at 500Vdc, all under UL489. The trip unit type is an electronic Micrologic Standard 3.3 (LI) with no display, and it features lugs on both load and line sides for connection, classified under utilisation category A.

Schneider Electric

FAQ

Out if stock but available for backorder.

PowerPact L Circuit Breaker,Micrologic5.3E,400A,3P,600V,100kA

Similar products from: Electronic Components

What can I help you find today?

Recommended parts