80PS080X3.10-01 B&R Electronic Components

Product Details

• Weight
  3.75 kg
• Input current at full load
  3x 2.2 A at 400 VAC; 3x 1.8 A at 480 VAC
• Series connection
  No
• Degree of protection per EN 60529
  IP20
• Fuse protection External
  External fuse required for line protection
• Output current / Output power Continuous current / Continuous power
  30 A
• Temperature Storage
  -25 to 85°C
• Frequency range of mains voltage
  50 to 60 Hz ±5%
• Control accuracy
  ±2%
• Parallel connection
  Yes, max. 3 power supply units, for redundancy and increased power
• Ventilation/Cooling
  Internally controlled fan
• Fuse protection Internal
  Each phase internally fused (5 A)
• User interface Variant
  10-pin terminal block
• Relative humidity Storage
  5 to 95%, non-condensing
• Input voltage range
  3x 380 to 480 VAC ±10%
• Voltage range
  24 VDC ±10%
• Electrical isolation X2X Link - Mains input
  Yes
• Certifications UL
  cULus E225616; Power conversion equipment
• Power dissipation No-load operation
  30 W
• Dimensions Height
  257 mm
Power factor (cos φ)
0.72 @ 400 V 1 kW; 0.69 @ 480 V 1 kW
Output current
Max. 2 A continuous current
Electrical isolation Mains input - Power output
Yes
Electrical isolation X2X Link - 24 VDC
Yes
User interface Type
X2X Link
Relative humidity Transport
5 to 95%, non-condensing
Connection type
Maximum 25 m line length to the power supply module
Output voltage
24 to 80 VDC
Switch-on time
<5 s (does not apply during firmware update)
Overtemperature protection (chopper-internal)
Yes
Certifications EAC
Yes
Output current / Output power Maximum current / Maximum power
40 A
Output power
Max. 1000 W continuous power
Max. capacitive load
Unlimited
Electrical isolation Power output - 24 VDC
No
Overload/Pulse capacity Overload current
20% overcurrent
Power dissipation Rated load
90 W
Power failure bypass
10 ms (at full load)
Output protection
Short-circuit, overload and no-load proof
Output current 24 to 60 VDC
Max. 16.6 A continuous current
Mounting orientation Vertical
Yes
Dimensions Width
67.5 mm
B&R ID code
0xA7A9
Leakage current to PE
<3.5 mA
Response threshold for chopper activation
29 to 95 VDC (adjustable)
Electrical isolation Mains input - 24 VDC
Yes
Certifications CE
Yes
Output current 60 to 80 VDC
Max. 16.6 to 12.5 A continuous current
Temperature Transport
-25 to 85°C
Dimensions Depth
219 mm
Status LED
Yes
Power back immunity
Yes, <100 VDC
Material
Robust metal housing
Certifications KC
Yes
User interface Min. X2X Link cycle time
250 µs
Relative humidity Operation
5 to 95%, non-condensing
Phase failure detector
Yes
Protective circuit
Transient surge protection with varistor
Efficiency
>92%
Electrical isolation X2X Link - Power output
Yes
Overload/Pulse capacity Overload duration
2 s
Temperature Operation
0 to 50°C

80PS080X3.10-01 Related Documents