Powermatic Associates Logo

RE17RLJU Schneider Electric Industrial Automation Components

RE17RLJU on Powermatic Associates
Schneider Electric

Part#:RE17RLJU

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric RE17RLJU is an analog timer featuring modular design with a width of 18mm, equivalent to 1 module, and offers dual function timing capabilities including Asymmetrical flashing relay (starting pulse-off) and Asymmetrical flashing relay (starting pulse-on) with pause/summation control signal. It is equipped with a selector switch on the front panel for control type selection and provides a reset time of 120ms typically upon de-energisation. The control signal pulse width is typically 100ms with a load in parallel and 30ms without, and it has a power-on delay of 100ms. This timer operates at a frequency of 10Hz and is designed for DIN rail mounting. It has a rated current of 8 A and falls under the RE17R sub-range. The degree of protection is IP40 for the housing, IP20 for the terminal block, and IP50 for the front panel. The contacts are cadmium-free, and the housing material is self-extinguishing. Power consumption is 0.5 W at 12Vdc, and the contact type is SPDT (Single Pole Double Throw) - 1C/O. The rated impulse voltage (Uimp) is 5 kV, and it can operate with a supply voltage of 12 V (minimum 10.8 V). The display includes an LED indicator that remains steady when the relay is energised and without timing in progress, and flashes during timing (80% ON and 20% OFF). Its electrical durability with a resistive load at 250Vac is rated for 100,000 operations and 10,000,000 operations mechanically. The time delay range is from 0.1s to 100h (0.1 to 360,000 s). It can operate within a temperature range of -20°C to +60°C.

Product Details

  • Time Delay Range
    6...60 min 1...10 h 6...60 s 1...10 s 10...100 h 0.1...1 s 1...10 min
  • Connections - Terminals
    Screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end Screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end Screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 14) flexible with cable end
  • Control Signal Pulse Width
    100 ms with load in parallel typical 30 ms typical
  • Local Signalling
    LED indicator on steady: relay energised, no timing in progress LED indicator 80 % ON and 20 % OFF flashing: timing in progress
  • Safety Reliability Data
    B10d = 270000 MTTFd = 296.8 years
  • Mounting Support
    35 mm DIN rail conforming to EN/IEC 60715
  • Functionality
    Asymmetrical flashing timer
  • Marking
    CE
  • Dielectric Strength
    2.5 kV 1 mA/1 minute 50 Hz IEC 61812-1
  • On-Load Factor
    100 %
  • Compatibility Code
    RE17
  • [Uimp] Rated Impulse Withstand Voltage
    5 kV 1.2/50 µs
  • Power On Delay
    100 ms
  • Electrical Durability
    100000 cycles resistive 8 A 250 V AC
  • Operating Frequency
    10 Hz
  • Mechanical Durability
    10000000 cycles
  • Breaking Capacity
    2000 VA
  • Maximum Switching Current
    8 A AC/DC
  • Maximum Power Consumption In W
    0.5 W 12 V DC
  • Minimum Switching Current
    10 mA 5 V DC
  • Reset Time
    120 ms on de-energisation typical
  • Power Consumption In VA
    0…0.7 VA 12 V AC
  • Setting Accuracy Of Time Delay
    +/- 10 % of full scale 25 °C IEC 61812-1
  • Voltage Drift
    +/- 0.2 %/V
  • Temperature Drift
    +/- 0.05 %/°C
  • Repeat Accuracy
    +/- 0.5 % IEC 61812-1
  • Housing Material
    Self-extinguishing
  • Tightening Torque
    5.31…8.85 lbf.in (0.6…1 N.m) IEC 60947-1
  • Release Of Input Voltage
    5 V
  • Voltage Range
    0.9...1.2 Us
  • Supply Frequency
    50...60 Hz +/- 5 %
  • Depth
    2.83 in (72 mm)
  • Contacts Material
    Cadmium free
  • Time Delay Type
    L, Li
  • Contacts Type And Composition
    1 C/O
  • Discrete Output Type
    Relay
  • Control Type
    Selector switch front panel
  • Range Of Product
    Harmony Timer Relays
  • Product Or Component Type
    Dual function relay
  • Device Short Name
    RE17R
  • Width
    0.69 in (17.5 mm)
  • Nominal Output Current
    8 A
  • Net Weight
    0.15 lb(US) (0.07 kg)
  • Mounting Position
    Any position in relation to normal vertical mounting plane
  • Creepage Distance
    4 kV/3 IEC 60664-1
  • Maximum Switching Voltage
    250 V AC
  • Insulation Resistance
    100 MOhm 500 V DC IEC 60664-1
  • [Us] Rated Supply Voltage
    12 V AC/DC 50/60 Hz
  • Height
    3.54 in (90 mm)

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of RE17RLJU on Powermatic Associates is $53.00. Order now.

RE17RLJU Related Documents

Product Datasheet-1631030746418.pdfCatalog-1631030746447.pdfInstruction Sheet-1631030746414.pdf

Similar products from: Schneider Electric Industrial Automation Components

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

17 in stock
MGN61508 on Powermatic Associates

MGN61508

Schneider Electric

Schneider Electric MGN61508 is a Miniature Circuit Breaker (MCB) designed for DC applications. It falls under the C60H-DC sub-range and features a rated current of 10A with a rated voltage of 250V DC. This MCB is equipped with 1 pole that is protected and utilizes a C tripping curve.

32 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock
M9F43303 on Powermatic Associates

M9F43303

Schneider Electric

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

5 in stock
VW3A9921 on Powermatic Associates

VW3A9921

Schneider Electric

Schneider Electric VW3A9921 is an adapter designed for direct circuit breaker mounting. This mechanical adapter kit facilitates the integration of components by providing a compatible interface for secure and straightforward installation.

12 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock

Manufacturer warranty

RE17RLJU Schneider Electric

$53.00

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$53.00

$53.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare RE17RLJU with other Industrial Automation Components products

Time Delay Range

Connections - Terminals

Control Signal Pulse Widt...

Local Signalling

Safety Reliability Data

Mounting Support

Functionality

Marking

Dielectric Strength

On-Load Factor

Selected product

RE17RLJU
Backordered
RE17RLJU
Schneider Electric

Schneider Electric RE17RLJU is an analog timer featuring modular design with a width of 18mm, equiva...

Time Delay Range6...60 min 1...10 h 6...60 s...

Connections - TerminalsScrew terminals, 1 x 0.5...1...

Control Signal Pulse Width100 ms with load in parallel...

Local SignallingLED indicator on steady: rel...

Safety Reliability DataB10d = 270000 MTTFd = 296.8 ...

Mounting Support35 mm DIN rail conforming to...

FunctionalityAsymmetrical flashing timer

MarkingCE

Dielectric Strength2.5 kV 1 mA/1 minute 50 Hz I...

On-Load Factor100 %

XB5AW31B5
2 in stock
XB5AW31B5
Schneider Electric

Schneider Electric XB5AW31B5 is an illuminated flush push-button designed for automation application...

Time Delay Range-

Connections - Terminals-

Control Signal Pulse Width-

Local Signalling-

Safety Reliability Data-

Mounting Support-

Functionality-

Marking-

Dielectric Strength-

On-Load Factor-

XB5AW34B5
2 in stock
XB5AW34B5
Schneider Electric

Schneider Electric XB5AW34B5 is an illuminated flush push-button designed for automation control sys...

Time Delay Range-

Connections - Terminals-

Control Signal Pulse Width-

Local Signalling-

Safety Reliability Data-

Mounting Support-

Functionality-

Marking-

Dielectric Strength-

On-Load Factor-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

MFI1FRL17N4 on Powermatic Associates

MFI1FRL17N4

Novanta IMS

Novanta IMS MFI1FRL17N4 is a stepper motor controller within the Stepper motor controllers sub-range, designed under the MicroDrive series. It operates with a supply voltage range of 12Vdc to 48Vdc, nominally at 24Vdc, and supports a rated current of 3A. This controller is equipped for DC stepper motor drive functions and features an ambient air temperature for operation between 0 and +65 °C. For connectivity, it includes 30cm / 12" bare end flying leads, a 10-pin wire crimp connector, and a 4-pin wire crimp connector. Communication with the controller is facilitated through RS-422 and RS-485 protocols. It also offers 4 x digital outputs (sinking; NPN) and 4 x digital inputs (sourcing; NPN). The device is designed to be stored in conditions ranging from -25 to +70 °C ambient air temperature.

0 in stock
MDI4MRQ34C1-EQ on Powermatic Associates

MDI4MRQ34C1-EQ

Novanta IMS

Novanta IMS MDI4MRQ34C1-EQ is a stepper motor designed with an integrated driver and a 2-phase AC stepper motor configuration. It features an external single-end 512-line optical encoder and is built with a triple (3) motor stack, Plus 2 version for expanded features. This motor offers connectivity through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. It operates on a supply voltage of 120Vac and is mounted via an 85x85mm flange. The MDI4MRQ34C1-EQ is designed to function within an ambient air temperature range of 0 to +85°C and is protected to a degree of IP65. It has a moment of inertia of 3.4kg.cm^2 and provides a stall torque of 529N.cm, with a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

RE17RMMWS on Powermatic Associates

RE17RMMWS

Verified stock: 0

Schneider Electric RE17RMMWS is an analog timer featuring a modular design of 18mm / 1module with multiple functions including A, Ac, At, B, Bw, C, D, Di, H, Ht. It offers a selector switch on the front panel for control type selection, a reset time of 120ms on de-energisation, and control signal pulse widths of 100ms (with load) and 30ms (typical). This timer has a power-on delay of 100ms, operates at a frequency of 10Hz, and is designed for DIN rail mounting. It has a rated current of 8 A and falls under the RE17R sub-range. The degree of protection is IP40 for the housing, IP20 for the terminal block, and IP50 for the front panel. The contacts are cadmium-free, and the housing is made from self-extinguishing material. Power consumption at 240Vdc is 1.5 W, and it features SPDT (1C/O) contacts. The rated impulse voltage is 5 kV, and it supports a supply voltage of 12-240 V AC/DC with a minimum of 20.4 V. The display includes an LED indicator for relay status and timing progress. Electrical durability is rated at 100,000 operations for 250Vac resistive load and 10,000,000 operations overall. Time delay ranges from 0.1s to 100h (0.1 to 360,000 s), with spring terminals for connections. It operates within a temperature range of -20°C to +60°C.

Schneider Electric

RE17RLMU on Powermatic Associates

RE17RLMU

Verified stock: 0

Schneider Electric RE17RLMU is an analog timer featuring modular design at 18mm / 1module with dual function capabilities including Asymmetrical flashing relay (starting pulse-off) and Asymmetrical flashing relay (starting pulse-on) with pause/summation control signal. It offers a selector switch on the front panel for control type selection, a reset time of 120ms on de-energisation, control signal pulse widths of 100ms (with load in parallel) and 30ms, and a power-on delay of 100ms. The operating frequency is set at 10Hz. Designed for DIN rail mounting, it has a rated current of 8 A and falls under the RE17R sub-range. The degree of protection is IP40 for the housing, IP20 for the terminal block, and IP50 for the front panel. The contacts are cadmium-free, and the housing material is self-extinguishing. Power consumption is 0.6 W at 24Vdc. It features SPDT (Single Pole Double Throw) - 1C/O contacts, a rated impulse voltage (Uimp) of 5 kV, and a supply voltage range of 24-240 V AC and 24 V DC (with a minimum of 20.4 V). The display includes an LED indicator that remains steady when the relay is energised and without timing in progress, and flashes during timing (80% ON and 20% OFF). Electrical durability is rated at 100,000 operations for 250Vac resistive load and 10,000,000 operations overall. Time delay options range from 0.1s to 100h (0.1 to 360,000 s). The timer operates within a temperature range of -20°C to +60°C.

Schneider Electric

RE17LLBM on Powermatic Associates

RE17LLBM

Verified stock: 0

Schneider Electric RE17LLBM is an analog timer designed for DIN rail mounting, featuring a modular design at 18mm / 1module. It offers dual function capabilities including Asymmetrical flashing relay (starting pulse-off) and Asymmetrical flashing relay (starting pulse-on) with pause/summation control signal. The timer has a rated current of 0.7 A and falls under the RE17L sub-range. It provides a degree of protection with IP40 for the housing, IP20 for the terminal block, and IP50 for the front panel. The housing material is self-extinguishing, ensuring durability. With a power consumption of 3 VA at 240Vac, it includes 1 x solid state output for contacts type. The rated impulse voltage stands at 5 kV, and it supports a supply voltage range of 24-240 V AC, with a minimum of 20.4 V. It boasts an electrical durability of 100,000,000 operations and offers a time delay range from 0.1s to 100h (0.1 to 360,000 s). The timer operates within a temperature range of -20°C to +60°C.

Schneider Electric

RE17LMBM on Powermatic Associates

RE17LMBM

Verified stock: 0

Schneider Electric RE17LMBM is an analog timer designed for DIN rail mounting, featuring a modular design at 18mm / 1module. It offers a versatile range of functions including A, Ac, At, B, Bw, C, D, Di, H, and Ht. The timer operates with a rated current of 0.7 A and falls under the RE17L sub-range. It provides a degree of protection rated at IP40 for the housing, IP20 for the terminal block, and IP50 for the front panel. Constructed from self-extinguishing material, the RE17LMBM has a power consumption of 3 VA at 240Vac and includes 1 x solid state output contact type. It can withstand a rated impulse voltage of 5 kV and accepts a supply voltage ranging from 24-240 V AC, with a minimum of 20.4 V. This timer is designed for electrical durability with load up to 100,000,000 operations and offers a time delay range from 0.1s to 100h or 0.1 to 360,000 s. It operates within a temperature range of -20°C to +60°C.

Schneider Electric

RE17RMEMU on Powermatic Associates

RE17RMEMU

Verified stock: 0

Schneider Electric RE17RMEMU is an analog timer featuring a modular design at 18mm / 1module with multi-function capabilities including functions A; At; B; C; D; Di; H; Ht. It is equipped with a selector switch on the front panel for control type selection and offers a reset time of 120ms on de-energisation, with control signal pulse widths of 100ms (with load in parallel) and 30ms, respectively. The device has a power-on delay of 100ms and operates at a frequency of 10Hz. Designed for DIN rail mounting, it has a rated current of 8 A and falls under the RE17R sub-range. The degree of protection is IP40 for the housing, IP20 for the terminal block, and IP50 for the front panel. The contacts are cadmium-free, and the housing material is self-extinguishing. Power consumption is 0.6 W at 24Vdc, and the contact type is SPDT (1C/O). The rated impulse voltage is 5 kV, with a supply voltage range of 24-240 V AC and 24 V DC (minimum 20.4 V). The display features an LED indicator to show the status of relay energisation and timing progress. Electrical durability is rated at 100,000 operations for 250Vac resistive load and 10,000,000 operations overall. The timer offers a time delay range of 1s - 300h / 1 - 1,080,000 s, and operates within a temperature range of -20°C to +60°C.

Schneider Electric

FAQ

What is the price of RE17RLJU?
Purchase the RE17RLJU from Powermatic Associates at the price of $53.00. Order today.

Out if stock but available for backorder.

Schneider Electric RE17RLJU is an analog timer featuring modular design with a width of 18mm, equivalent to 1 module, and offers dual function timing capabilities including Asymmetrical flashing relay (starting pulse-off) and Asymmetrical flashing relay (starting pulse-on) with pause/summation control signal. It is equipped with a selector switch on the front panel for control type selection and provides a reset time of 120ms typically upon de-energisation. The control signal pulse width is typically 100ms with a load in parallel and 30ms without, and it has a power-on delay of 100ms. This timer operates at a frequency of 10Hz and is designed for DIN rail mounting. It has a rated current of 8 A and falls under the RE17R sub-range. The degree of protection is IP40 for the housing, IP20 for the terminal block, and IP50 for the front panel. The contacts are cadmium-free, and the housing material is self-extinguishing. Power consumption is 0.5 W at 12Vdc, and the contact type is SPDT (Single Pole Double Throw) - 1C/O. The rated impulse voltage (Uimp) is 5 kV, and it can operate with a supply voltage of 12 V (minimum 10.8 V). The display includes an LED indicator that remains steady when the relay is energised and without timing in progress, and flashes during timing (80% ON and 20% OFF). Its electrical durability with a resistive load at 250Vac is rated for 100,000 operations and 10,000,000 operations mechanically. The time delay range is from 0.1s to 100h (0.1 to 360,000 s). It can operate within a temperature range of -20°C to +60°C.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock