ATV630D11M3 Schneider Electric Industrial Automation Components

Product Details

• Product Or Component Type
  Variable speed drive
• Prospective Line Isc
  50 kA
• Product Specific Application
  Process and utilities
• Supply Frequency
  50...60 Hz - 5...5 %
• Analogue Input Number
  3
• Safety Function
  STO (safe torque off) SIL 3
• Mounting Mode
  Wall mount
• Net Weight
  30.42 lb(US) (13.8 kg)
• Depth
  9.13 in (232 mm)
• Number Of Addresses
  1…247 Modbus serial
• Type Of Cooling
  Forced convection
• Range Of Product
  Altivar Process ATV600
• Output Voltage
  <= power supply voltage
• Exchange Mode
  Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
• EMC Filter
  Without EMC filter
• Output Frequency
  0.0001…0.5 kHz
• Braking To Standstill
  By DC injection
• Discrete Input Number
  8
• Degree Of Protection
  UL type 1 UL 508C
• Method Of Access
  Slave Modbus TCP
Variant
Standard version
[Us] Rated Supply Voltage
200...240 V - 15...10 %
Nominal Switching Frequency
4 kHz
Acceleration And Deceleration Ramps
Linear adjustable separately from 0.01...9999 s
Isolation
Between power and control terminals
Device Short Name
ATV630
Speed Drive Output Frequency
0.1…599 Hz
Minimum Switching Current
Relay output R1, R2, R3 5 mA 24 V DC
Width
8.31 in (211 mm)
Analogue Output Number
2
Motor Power Range AC-3
7…11 kW 200…240 V 3 phase
Height
21.50 in (546 mm)
Relay Output Number
3
Refresh Time
Relay output R1, R2, R3)5 ms +/- 0.5 ms)
Switching Frequency
2...12 kHz adjustable 4...12 kHz with derating factor
Apparent Power
13.7 kVA 240 V normal duty) 9.6 kVA 240 V heavy duty)
Maximum Horse Power Rating
15 hp normal duty 10 hp heavy duty
IP Degree Of Protection
IP21IEC 61800-5-1 IP21IEC 60529
Motor Power Kw
11 kW normal duty) 7.5 kW heavy duty)
Continuous Output Current
46.8 A 4 kHz normal duty 32.7 A 4 kHz heavy duty
Synchronous Motor Control Profile
Permanent magnet motor Synchronous reluctance motor
Maximum Transient Current
51.5 A 60 s normal duty) 49.1 A 60 s heavy duty)
Product Destination
Synchronous motors Asynchronous motors
Frequency Resolution
Display unit 0.1 Hz Analog input 0.012/50 Hz
Analogue Input Type
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits
Connector Type
RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP RJ45 (on the remote graphic terminal) for Modbus serial
Accuracy
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Linearity Error
AI1, AI2, AI3 +/- 0.15 % of maximum value analog input AO1, AO2: +/- 0.2 % for analog output
Permissible Temporary Current Boost
1.1 x In during 60 s (normal duty) 1.5 x In during 60 s (heavy duty)
Analogue Output Type
Software-configurable voltage AO1, AO2 0...10 V DC 470 Ohm 10 bits Software-configurable current AO1, AO2: 0...20 mA, resolution 10 bits
Communication Port Protocol
Ethernet Modbus serial Modbus TCP
Supply
External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection Internal supply for di
Discrete Input Type
DI1...DI6 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm DI5, DI6 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V) STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm
Electrical Connection
Control: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16 Motor: screw terminal 16 mm²/AWG 6 Line side screw terminal 10...16 mm² AWG 8...AWG 6
Relay Output Type
Configurable relay logic R1 fault relay NO/NC 100000 cycles Configurable relay logic R2 sequence relay NO 100000 cycles Configurable relay logic R3 sequence relay NO 100000 cycles
Input Compatibility
DI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2 DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68 STOA, STOB discrete input level 1 PLC EN/IEC 61131-2
Asynchronous Motor Control Profile
Optimized torque mode Variable torque standard Constant torque standard
Line Current
39.3 A 200 V normal duty) 32.9 A 240 V normal duty) 27.2 A 200 V heavy duty) 23.1 A 240 V heavy duty)
Local Signalling
3 LEDs for local diagnostic 3 LEDs (dual colour) for embedded communication status 4 LEDs (dual colour) for communication module status 1 LED (red) for presence of voltage
Sampling Duration
2 ms +/- 0.5 ms DI1...DI4) - discrete input 5 ms +/- 1 ms DI5, DI6) - discrete input 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input 10 ms +/- 1 ms AO1) - analog output
Discrete Input Logic
Positive logic (source) (DI1...DI6), < 5 V (state 0), > 11 V (state 1) Negative logic (sink) (DI1...DI6), > 16 V (state 0), < 10 V (state 1) Positive logic (source) (DI5, DI6), < 0.6 V (state 0), > 2.5 V (state 1) Positive logic (source) ST
Maximum Switching Current
Relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC Relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC Relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms
Motor Slip Compensation
Can be suppressed Not available in permanent magnet motor law Automatic whatever the load Adjustable
Option Card
Slot A: communication module, Profibus DP V1 Slot A: communication module, Profinet Slot A: communication module, DeviceNet Slot A: communication module, Modbus TCP/EtherNet/IP Slot A: communication module, CANopen daisy chain RJ45

Variable Speed Drive Application Selection
Building - HVAC Compressor centrifugal Food and beverage processing Other application Mining mineral and metal Fan Mining mineral and metal Pump Oil and gas Fan Water and waste water Other application Building - HVAC Screw co
Protection Type
Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive

ATV630D11M3 Related Documents