LTMR08PFM Schneider Electric Industrial Automation Components

Product Details

• Device Application
  Equipment monitoring and control
• Connection Pitch
  0.20 in (5.08 mm)
• [Us] Rated Supply Voltage
  100...240 V AC 50/60 Hz
• Current State 1 Guaranteed
  Logic input 79...264 V >= 2 mA 25 ms
• Device Short Name
  LTMR
• Web Services
  Web server
• Range
  TeSys
• Communication Port Protocol
  Profibus DP
• Measurement Current
  0.4…8 A
• Maximum Operating Rate
  1800 cyc/h
• Pollution Degree
  3
• Supply Voltage Limits
  93.5…264 V AC
• Logic Input Number
  6
• Maximum Output Switching Frequency
  2 Hz
• Product Name
  TeSys T
• Compatibility Code
  LTMR
• Current Consumption
  8...62.8 mA
• Overvoltage Category
  III
• Height
  2.40 in (61 mm)
• Current State 0 Guaranteed
  Logic input 0...40 V <= 15 mA 25 ms
Product Or Component Type
Motor controller
Short-Circuit Withstand
100 kA EN/IEC 60947-4-1
Net Weight
1.17 lb(US) (0.53 kg)
Tightening Torque
Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)
Width
3.58 in (91 mm)
Depth
4.82 in (122.5 mm)
Contacts Type And Composition
1 NO + 1 NC fault signal 3 NO
Bus Type
Profibus DP polarised 2-wire RS485 1...125 9.6 kbit/s...12 Mbit/s, SUB-D 9 2 shielded twisted pairs, type A Profibus DP polarised 2-wire RS485 1...125 9.6 kbit/s...12 Mbit/s, terminal block 2 shielded twisted pairs, type A
Associated Fuse Rating
4 A gG output 0.5 A gG control circuit
Input Current
3.1 mA 100 V 7.5 mA 240 V
Permissible Power
480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
Load Current
5 A 250 V AC logic output 5 A 30 V DC logic output
[Ui] Rated Insulation Voltage
690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508
Connections - Terminals
Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2
[Uimp] Rated Impulse Withstand Voltage
4 kV supply, inputs and outputs EN/IEC 60947-4-1 6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1
Electromagnetic Compatibility
Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
Metering Type
Average current Iavg Earth-fault current Temperature Imbalance current Phase current I1, I2, I3 RMS
Measurement Accuracy
5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 1 % current 5 % active and reactive
Network And Machine Diagnosis Type
Phase fault and earth fault trip counters Trip history information Starting current and time Fault recording Waiting time after overload tripping Event recording Motor control command recording Running hours counter/oper
Protection Type
Locked rotor Overload Phase unbalance Phase failure Earth-leakage protection Reverse polarity protection Load fluctuation Thermal protection Power factor variation Thermal overload protection Overload (lon

LTMR08PFM Related Documents