LTMR27PFM Schneider Electric Industrial Automation Components

Product Details

• Measurement Current
  1.35…27 A
• Maximum Output Switching Frequency
  2 Hz
• Height
  2.40 in (61 mm)
• Overvoltage Category
  III
• Logic Input Number
  6
• Compatibility Code
  LTMR
• Product Name
  TeSys T
• Range
  TeSys
• Current State 0 Guaranteed
  Logic input 0...40 V <= 15 mA 25 ms
• Tightening Torque
  Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)
• [Us] Rated Supply Voltage
  100...240 V AC 50/60 Hz
• Depth
  4.82 in (122.5 mm)
• Current Consumption
  8...62.8 mA
• Device Application
  Equipment monitoring and control
• Device Short Name
  LTMR
• Maximum Operating Rate
  1800 cyc/h
• Short-Circuit Withstand
  100 kA EN/IEC 60947-4-1
• Connection Pitch
  0.20 in (5.08 mm)
• Product Or Component Type
  Motor controller
• Supply Voltage Limits
  93.5…264 V AC
Width
3.58 in (91 mm)
Communication Port Protocol
Profibus DP
Current State 1 Guaranteed
Logic input 79...264 V >= 2 mA 25 ms
Pollution Degree
3
Net Weight
1.17 lb(US) (0.53 kg)
Web Services
Web server
Permissible Power
480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
Associated Fuse Rating
4 A gG output 0.5 A gG control circuit
Input Current
3.1 mA 100 V 7.5 mA 240 V
Load Current
5 A 250 V AC logic output 5 A 30 V DC logic output
Contacts Type And Composition
1 NO + 1 NC fault signal 3 NO
Bus Type
Profibus DP polarised 2-wire RS485 1...125 9.6 kbit/s...12 Mbit/s, SUB-D 9 2 shielded twisted pairs, type A Profibus DP polarised 2-wire RS485 1...125 9.6 kbit/s...12 Mbit/s, terminal block 2 shielded twisted pairs, type A
[Ui] Rated Insulation Voltage
690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508
Connections - Terminals
Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2
[Uimp] Rated Impulse Withstand Voltage
4 kV supply, inputs and outputs EN/IEC 60947-4-1 6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1
Electromagnetic Compatibility
Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
Metering Type
Average current Iavg Temperature Earth-fault current Phase current I1, I2, I3 RMS Imbalance current
Network And Machine Diagnosis Type
Phase fault and earth fault trip counters Trip history information Trip context information Motor control command recording Running hours counter/operating time Waiting time after overload tripping Remaining operating time be
Measurement Accuracy
5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 1 % current 5 % active and reactive
Protection Type
Load fluctuation Thermal protection Locked rotor Reverse polarity protection Phase unbalance Earth-leakage protection Overload (long time) Thermal overload protection Overload Phase failure Power factor va

LTMR27PFM Related Documents