LTMR100EFM Schneider Electric Industrial Automation Components

Product Details

• Supply Voltage Limits
  93.5…264 V AC
• Current Consumption
  8...62.8 mA
• Range
  TeSys
• Current State 1 Guaranteed
  Logic input 79...264 V >= 2 mA 25 ms
• Connection Pitch
  0.20 in (5.08 mm)
• Depth
  4.82 in (122.5 mm)
• Device Short Name
  LTMR
• Communication Port Protocol
  Modbus TCP/EtherNet/IP
• Maximum Output Switching Frequency
  2 Hz
• Overvoltage Category
  III
• Width
  3.58 in (91 mm)
• Device Application
  Equipment monitoring and control
• Bus Type
  Ethernet IEEE 802.3 0...159 10...100 Mbit/s, RJ45 2 shielded twisted pairs
• Short-Circuit Withstand
  100 kA EN/IEC 60947-4-1
• Current State 0 Guaranteed
  Logic input 0...40 V <= 15 mA 25 ms
• Product Or Component Type
  Motor controller
• Compatibility Code
  LTMR
• [Us] Rated Supply Voltage
  100...240 V AC 50/60 Hz
• Logic Input Number
  6
• Tightening Torque
  Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)
Measurement Current
5…100 A
Product Name
TeSys T
Maximum Operating Rate
1800 cyc/h
Height
2.40 in (61 mm)
Pollution Degree
3
Net Weight
1.17 lb(US) (0.53 kg)
Web Services
Web server
Input Current
3.1 mA 100 V 7.5 mA 240 V
Permissible Power
480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
Associated Fuse Rating
4 A gG output 0.5 A gG control circuit
Load Current
5 A 250 V AC logic output 5 A 30 V DC logic output
Contacts Type And Composition
1 NO + 1 NC fault signal 3 NO
[Ui] Rated Insulation Voltage
690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508
[Uimp] Rated Impulse Withstand Voltage
4 kV supply, inputs and outputs EN/IEC 60947-4-1 6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1
Connections - Terminals
Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2
Electromagnetic Compatibility
Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
Metering Type
Phase current I1, I2, I3 RMS Temperature Earth-fault current Average current Iavg Imbalance current
Network And Machine Diagnosis Type
Waiting time after overload tripping Motor control command recording Trip context information Phase fault and earth fault trip counters Starting current and time Trip history information Fault recording Event recording
Measurement Accuracy
5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 5 % active and reactive power 0,02
Protection Type
Reverse polarity protection Overload Phase unbalance Overload (long time) Thermal protection Power factor variation Thermal overload protection Locked rotor Earth-leakage protection Load fluctuation Phase

LTMR100EFM Related Documents