LTMR100MBD Schneider Electric Industrial Automation Components

Product Details

• Measurement Current
  5…100 A
• Logic Input Number
  6
• Depth
  4.82 in (122.5 mm)
• Current Consumption
  56...127 mA
• Input Current
  7 mA
• Height
  2.40 in (61 mm)
• Connection Pitch
  0.20 in (5.08 mm)
• Device Short Name
  LTMR
• Maximum Output Switching Frequency
  2 Hz
• Supply Voltage Limits
  20.4…26.24 V DC
• Product Name
  TeSys T
• Current State 1 Guaranteed
  Logic input < 15 V 2...15 mA 15 ms
• Tightening Torque
  Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)
• Product Or Component Type
  Motor controller
• Net Weight
  1.17 lb(US) (0.53 kg)
• Width
  3.58 in (91 mm)
• Range
  TeSys
• Current State 0 Guaranteed
  Logic input < 5 V <= 15 mA 5 ms
• [Us] Rated Supply Voltage
  24 V DC
• Short-Circuit Withstand
  100 kA EN/IEC 60947-4-1
Maximum Operating Rate
1800 cyc/h
Pollution Degree
3
Device Application
Equipment monitoring and control
Communication Port Protocol
Modbus
Overvoltage Category
III
Compatibility Code
LTMR
Web Services
Web server
Contacts Type And Composition
1 NO + 1 NC fault signal 3 NO
Metering Type
Phase current I1, I2, I3 RMS Temperature Average current Iavg Earth-fault current Imbalance current
Associated Fuse Rating
4 A gG output 0.5 A gG control circuit
Load Current
5 A 250 V AC logic output 5 A 30 V DC logic output
Permissible Power
480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)
Bus Type
Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, RJ45 2 shielded twisted pairs Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, terminal block 2 shielded twisted pairs
[Ui] Rated Insulation Voltage
690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508
[Uimp] Rated Impulse Withstand Voltage
6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1 0.8 kV supply, inputs and outputs EN/IEC 60947-4-1
Connections - Terminals
Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2
Electromagnetic Compatibility
Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
Protection Type
Thermal overload protection Phase unbalance Overload (long time) Phase failure Thermal protection Power factor variation Reverse polarity protection Overload Locked rotor Load fluctuation Earth-leakage pro
Network And Machine Diagnosis Type
Remaining operating time before overload tripping Phase fault and earth fault trip counters Fault recording Waiting time after overload tripping Motor control command recording Event recording Starting current and time T
Measurement Accuracy
5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 5 % active and reactive power 0,02

LTMR100MBD Related Documents